Experimental Investigation on the Effect of Reinforcement Particles on the Forgeability and the Mechanical Properties of Aluminum Metal Matrix Composites

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org

Google-based Impact Factor: 1.34
Citations

Journals Menu

"Experimental Investigation on the Effect of Reinforcement Particles on the Forgeability and the Mechanical Properties of Aluminum Metal Matrix Composites"
written by S. Das, R. Behera, A. Datta, G. Majumdar, B. Oraon, G. Sutradhar,
published by Materials Sciences and Applications, Vol.1 No.5, 2010

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Enhancement of tribological properties of AA7075 aluminum alloy using nano-silicon carbide reinforcement: A detailed wear analysis and microhardness study
	Materials Today …, 2023

[2]	GRAPHENE REINFORCED ALUMINUM MATRIX COMPOSITES FOR STRUCTURAL APPLICATIONS
	2023

[3]	Mechanical Properties of Aluminum Based Metal Matrix Composites–A Review
	International Journal of Mechanical Engineering, 2022

[4]	Sensitivity Analysis of Reinforced Aluminum Based Metal Matrix Composites
	Materials, 2022

[5]	Experimental Investigation on Tribological Behaviour of AA6066: HSS-Cu Hybrid Composite in Dry Sliding Condition
	Advances in Materials …, 2022

[6]	Study on hot deformation behavior and workability of stir-cast Al6063-6wt.% steelp based composites
	Journal of the …, 2021

[7]	Experimental Analysis on the Forging Process of Al 6061 and Al 7075 Aluminium Alloys
	SunText Review of Material Science, 2021

[8]	A Review of Wire Arc Additive Manufacturing (WAAM) of Aluminium Composite, Process, Classification, Advantages, Challenges, and Application
	2021

[9]	Metal Matrix Composites Synthesized by Laser-Melting Deposition: A Review
	2020

[10]	A novel approach for the production and characterisation of aluminium–alumina hybrid metal matrix composites
	2020

[11]	Wear behavior of Al 7075/Al2O3/SiC Hybrid NMMC's by Stir Casting Method
	2020

[12]	Workability, Densification and Failure Characteristics of Selective Heated Sintered Powder Metallurgy Preforms during Upsetting
	2020

[13]	Mechanical Properties and Metallurgical Characterization of LM25/ZrO2 Composites Fabricated by Stir Casting Method
	2019

[14]	Influence of warm temperature (0.3-0.5 Tm) uniaxial compression on the distribution of reinforcing particles in a 2124-Al/10% SiC MMC
	2019

[15]	FORMABILITY CHARACTERISTICS OF Al-Cu-TiC COMPOSITE MATERIAL DURING COLD UPSETTING
	2019

[16]	FABRIKASI KOMPOSIT Al/Al₂O₃ BERPORI DENGAN 10, 20 DAN 30 wt% SPACE HOLDER
	2018

[17]	Tribological Behavior of Al 7075/SiC Metal Matrix Nano-composite by Stir Casting Method
	2018

[18]	Review of duplex electroless coatings and their properties
	Advances in Materials and Processing Technologies, 2018

[19]	Processing and Mechanical Behavior of TiB2 and ZnSt2 Reinforced Aluminium Alloy 6061 Hybrid Composite using Stir Casting
	2018

[20]	A REVIEW ON FABRICATION, MECHANICAL CHARACTERIZATION OF ALUMINIUM METAL MATRIX COMPOSITES
	"JOURNAL OF ADVANCEMENT IN ENGINEERING AND TECHNOLOGY", 2018

[21]	Effect of SiC Reinforcement on Microstructure and Mechanical Properties of Aluminum Metal Matrix Composite
	IOP Conference Series: Materials Science and Engineering, 2018

[22]	Investigation of Mechanical Properties of Aluminum 6063 with Boron Carbide and Fly Ash Composite Material
	2018

[23]	Characterization and Mechanical Properties of 2014 Aluminum Alloy Reinforced with Al2O3p Composite Produced by Two-Stage Stir Casting Route
	Journal of The Institution of Engineers (India): Series C, 2018

[24]	A Review on Fabrication and Mechanical Characterization of Aluminium Metal Matrix Composites
	2018

[25]	Wear behaviour of Al 7075/SiC/Mg metal matrix nano composite by liquid state process
	Advanced Composites and Hybrid Materials, 2018

[26]	TOZ METALURJİ METODU İLE ÜRETİLEN ALÜMİNYUM MATRİSLİ VE ALÜMİNA TAKVİYELİ KOMPOZİT MALZEMENİN ABRASİV
	2018

[27]	Experimentation on composite brake pads with aluminum reinforcement of SiC and Flyash
	2018

[28]	Aluminium SiC Metal Matrix Composite: A Review
	2017

[29]	Hot workability and densification behavior of sintered powder metallurgy Al-B4C preforms during upsetting
	Journal of Manufacturing Processes, 2017

[30]	Fabrication and Testing of Aluminium 6061 Alloy & Silicon Carbide Metal Matrix Composites
	2017

[31]	A REVIEW ON THE MECHANICAL PROPERTIES OF ALUMINIUM BASED METAL MATRIX COMPOSITE VIA POWDER METALLURGY
	International Journal of Innovation Sciences and Research, 2017

[32]	Wear Behaviour of Al-6061 alloy with different mesh size and reinforcement of SiC Metal Matrix Composite
	2016

[33]	Analysis of Stir Cast Aluminium Silicon Carbide Metal Matrix Composite: A Comprehensive Review
	Procedia Technology, 2016

[34]	Wear Behaviour of Al-6061/SiC Metal Matrix Composites
	Journal of The Institution of Engineers (India): Series C, 2016

[35]	R.,“Experimental Investigation of Mechanical and Wear behaviour of Aluminium LM6/ZrO 2 Composite fabricated by stir casting method”
	2015

[36]	摩擦攪拌粉末プロセスによる SiC 粒子分散 Al 基複合材料の作製
	粉体および粉末冶金, 2015

[37]	R.,“Experimental Investigation of Mechanical and Wear behaviour of Aluminium LM6/ZrO2 Composite fabricated by stir casting method”
	2015

[38]	Studies on the formability of powder metallurgical aluminum–copper composite
	Materials & Design, 2014

[39]	EFFECT OF SILICON CARBIDE PERCENTAGE ON FRACTURE TOUGHNESS OF ALUMINIUM SILIOCN CARBIDE METAL MATRIX COMPOSITES
	2014

[40]	Effect of Carbon Nanotubes Addition on Fracture Toughness in Aluminium Silicon Carbide Composite
	2014

[41]	Effect of silicon carbide percentage on fracture toughness of aluminum silicon carbide metal matrix composites
	2014

[42]	Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material.
	2013

[43]	Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material
	Metallurgical and Materials Transactions B, 2013

[44]	Rolling of cast Al‐SiCp particulate metal matrix composites and strip mechanical properties
	Materialwissenschaft und Werkstofftechnik , 2013

[45]	A Review on Processing of Particulate Metal Matrix Composites and its Properties
	International Journal of Applied Engineering Research, 2013

[46]	TRIBOLOGICAL BEHAVIOUR OF Al2014-Al2O3 PARTICLE-REINFORCED COMPOSITES PRODUCED BY POWDER METALLURGY METHOD
	Journal of the Balkan Tribological …, 2013

[47]	Rolling of cast Al-SiCp particulate metal matrix composites and strip mechanical properties Walzen von gegossenem, mit Al-SiCp partikelverstärktem Metall-Matrix …
	Sabbagh… - Materialwissenschaft …, 2013

[48]	Hot rolling behaviour of stir-cast Al 6061 and Al 6082 alloys–SiC fine particulates reinforced composites
	Journal of Materials Processing Technology, 2012

[49]	COMPACTION, SINTERING AND MECHANICAL PROPERTIES OF Al-SiCp COMPOSITES
	INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET), 2012

[50]	The Microstructure and Hardness of Al2O3 Particle Reinforced Composite
	Applied Mechanics and Materials, 2012

[51]	TM METODU İLE ÜRETİLEN Al2O3-TAKVİYELİ ALUMINYUM ESASLI KOMPOZİTLERİN AŞINMA DAVRANIŞI İÇİN İSTATİSTİKSEL MODEL OLUŞTURULMASI
	Y ?AH?N, KE ?KSüZ - timak.balikesir.edu.tr�, 2012

[52]	The Effects of Binders on the Strength and Hardness of Aluminium (Al) and Silicon Carbide (SiC) Particulates
	2011

[53]	PROGRAM STUDI SARJANA TEKNIK MESIN FAKULTAS TEKNIK UNIVERSITAS SRIWIJAYA

[1]	A Review on Formability and Damage Behavior of Powder Metallurgy Composites during Upsetting Journal of Testing and Evaluation, 2024 DOI:10.1520/JTE20230692

[2]	Experimental Investigation on Tribological Behaviour of AA6066: HSS-Cu Hybrid Composite in Dry Sliding Condition Advances in Materials Science and Engineering, 2022 DOI:10.1155/2022/9349847

[3]	Sensitivity Analysis of Reinforced Aluminum Based Metal Matrix Composites Materials, 2022 DOI:10.3390/ma15124225

[4]	A review of Wire Arc Additive Manufacturing (WAAM) of Aluminium Composite, Process, Classification, Advantages, Challenges, and Application Journal of Physics: Conference Series, 2021 DOI:10.1088/1742-6596/1973/1/012083

[5]	Study on hot deformation behavior and workability of stir-cast Al6063-6wt.% steel p based composites Journal of the Mechanical Behavior of Materials, 2021 DOI:10.1515/jmbm-2021-0012

[6]	Metal Matrix Composites Synthesized by Laser-Melting Deposition: A Review Materials, 2020 DOI:10.3390/ma13112593

[7]	A novel approach for the production and characterisation of aluminium–alumina hybrid metal matrix composites Materials Research Express, 2020 DOI:10.1088/2053-1591/ab8657

[8]	Mechanical Properties and Metallurgical Characterization of LM25/ZrO2 Composites Fabricated by Stir Casting Method Matéria (Rio de Janeiro), 2019 DOI:10.1590/s1517-707620190003.0753

[9]	Characterization and Mechanical Properties of 2014 Aluminum Alloy Reinforced with Al2O3p Composite Produced by Two-Stage Stir Casting Route Journal of The Institution of Engineers (India): Series C, 2019 DOI:10.1007/s40032-018-0442-x

[10]	Wear study of Al-SiC metal matrix composites processed through microwave energy 2018 DOI:10.1063/1.5029636

[11]	Review of duplex electroless coatings and their properties Advances in Materials and Processing Technologies, 2018 DOI:10.1080/2374068X.2018.1457298

[12]	Effect of SiC Reinforcement on Microstructure and Mechanical Properties of Aluminum Metal Matrix Composite IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/376/1/012057

[13]	Investigation of Reinforced Composite Aluminum Materials International Journal of Applied Physics and Mathematics, 2018 DOI:10.17706/ijapm.2018.8.4.90-104

[14]	Analysis of Stir Cast Aluminium Silicon Carbide Metal Matrix Composite: A Comprehensive Review Procedia Technology, 2016 DOI:10.1016/j.protcy.2016.05.052

[15]	The Microstructure and Hardness of Al₂O₃Particle Reinforced Composite Applied Mechanics and Materials, 2012 DOI:10.4028/www.scientific.net/AMM.232.39

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

Materials Sciences and Applications

Journals Menu

Home

About SCIRP

Service

Policies