has been cited by the following article(s):
|
[1]
|
Experimental study on aluminium bronze coatings fabricated by low pressure cold spraying and subsequent heat treatment
|
|
Surface and Coatings …,
2023 |
|
|
|
|
[2]
|
% 3, 5 NaCl Ortamında C95200 ve C95300 Alüminyum Bronzlarının Korozyon Davranışları
|
|
Bilecik Şeyh Edebali Üniversitesi Fen …,
2022 |
|
|
|
|
[3]
|
Effect of MoS2 mass fraction on microstructure and tribological characteristics of laser cladded Cu–10Al coating
|
|
Surfaces and Interfaces,
2022 |
|
|
|
|
[4]
|
Opposite corrosion behaviour of aluminum bronze induced by Pseudomonas fluorescens and its metabolites
|
|
Corrosion …,
2022 |
|
|
|
|
[5]
|
Mechanical properties of deep cryogenic treated Ni–Al–B alloy fabricated by CMT process
|
|
Materials Today …,
2022 |
|
|
|
|
[6]
|
ALÜMİNYUM BRONZLARININ MEKANİK, YORULMA, MİKROYAPI VE KOROZYON ÖZELLİKLERİNİN İNCELENMESİ
|
|
2022 |
|
|
|
|
[7]
|
How Tribo‐Oxidation Alters the Tribological Properties of Copper and Its Oxides
|
|
2021 |
|
|
|
|
[8]
|
Optimization of laser texture geometry and resulting functionality of nickel aluminium bronze for landing gear applications
|
|
2021 |
|
|
|
|
[9]
|
Preparation, microstructure and properties of Cu-8.3 Al/CNTs composites with different volume fractions of CNTs
|
|
2020 |
|
|
|
|
[10]
|
Effect of Heat Treatment on Tensile and Corrosion Properties of LM6 Hybrid Metal Matrix Composite Reinforced with Cenosphere and Red Mud
|
|
2019 |
|
|
|
|
[11]
|
Development of highly wear resistant Cu-Al alloys processed via powder metallurgy
|
|
2019 |
|
|
|
|
[12]
|
Improvement the Corrosion Resistance of Aluminum Bronze Alloy (Cu-7.7 wt% Al) Reinforced by Al2O3 and TiO2 Nanoparticles
|
|
2019 |
|
|
|
|
[13]
|
Microstructural evolution and mechanical properties of deep cryogenic treated Cu–Al–Si alloy fabricated by Cold Metal Transfer (CMT) process
|
|
2019 |
|
|
|
|
[14]
|
Modification of the structure and mechanical properties of aluminum bronze (Cu-10% Al) alloy with Zirconium and Titanium
|
|
International Journal of Scientific & Engineering Research,
2017 |
|
|
|
|
[15]
|
Fundição de hélices de navios em bronze de alumínio
|
|
2016 |
|
|
|
|
[16]
|
Investigating Corrosion Behaviour of Aluminium and Aluminium-Copper Alloy in H2SO4 as Anodizing Solution
|
|
2014 |
|
|
|
|
[17]
|
Bronzlarının Korozyon Davranışları Corrosion Behaviors of C95200 and C95300 Aluminium Bronzes in 3, 5% NaCl Environment
|
|
|
|
|
|
|
[1]
|
Effect of Fiber Laserprocess Parameters on Texture Dimensions Fabricated on Cast Iron Piston Ring Segments
Material Science Research India,
2022
DOI:10.13005/msri/190204
|
|
|
|
|
[2]
|
%3,5 NaCl Ortamında C95200 ve C95300 Alüminyum Bronzlarının Korozyon Davranışları
Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi,
2022
DOI:10.35193/bseufbd.1134737
|
|
|
|
|
[3]
|
%3,5 NaCl Ortamında C95200 ve C95300 Alüminyum Bronzlarının Korozyon Davranışları
Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi,
2022
DOI:10.35193/bseufbd.1134737
|
|
|
|
|
[4]
|
Optimisation of Laser Texture Geometry and Resulting Functionality of Nickel Aluminium Bronze for Landing Gear Applications
International Journal of Lightweight Materials and Manufacture,
2021
DOI:10.1016/j.ijlmm.2021.04.004
|
|
|
|
|
[5]
|
Improvement the Corrosion Resistance of Aluminum Bronze Alloy (Cu-7.7wt%Al) Reinforced by Al2O3 and TiO2 Nanoparticles
IOP Conference Series: Materials Science and Engineering,
2019
DOI:10.1088/1757-899X/518/3/032046
|
|
|
|
|
[6]
|
Effect of Heat Treatment on Tensile and Corrosion Properties of LM6 Hybrid Metal Matrix Composite Reinforced with Cenosphere and Red Mud
Journal of Minerals and Materials Characterization and Engineering,
2019
DOI:10.4236/jmmce.2019.71001
|
|
|
|