[1]
|
Comparative performance of jet and spray impingement cooling in steel strip run-out table: experimental results
Australian Journal of Mechanical Engineering,
2024
DOI:10.1080/14484846.2022.2066854
|
|
|
[2]
|
Development and Characterisation of a New Die-Casting Die Cooling System Based on Internal Spray Cooling
Metals,
2024
DOI:10.3390/met14090956
|
|
|
[3]
|
An analysis of flow characteristics during ethanol natural evaporation in capillary tubes with varying diameters
Applied Thermal Engineering,
2023
DOI:10.1016/j.applthermaleng.2023.120699
|
|
|
[4]
|
An analysis of flow characteristics during ethanol natural evaporation in capillary tubes with varying diameters
Applied Thermal Engineering,
2023
DOI:10.1016/j.applthermaleng.2023.120699
|
|
|
[5]
|
Spray Impingement Cooling of Metal Surfaces: a Review on Progressing Mechanisms
Thermal Engineering,
2023
DOI:10.1134/S0040601523080050
|
|
|
[6]
|
An analysis of flow characteristics during ethanol natural evaporation in capillary tubes with varying diameters
Applied Thermal Engineering,
2023
DOI:10.1016/j.applthermaleng.2023.120699
|
|
|
[7]
|
An Optimization Study of Cooling Rate of a Laboratory Scale ROT Based on Experimental Results
Journal of The Institution of Engineers (India): Series D,
2023
DOI:10.1007/s40033-023-00575-7
|
|
|
[8]
|
Comparative performance of jet and spray impingement cooling in steel strip run-out table: experimental results
Australian Journal of Mechanical Engineering,
2022
DOI:10.1080/14484846.2022.2066854
|
|
|
[9]
|
Effect of Nanoparticle Type and Surfactant on Heat Transfer Enhancement in Spray Cooling
Journal of Thermal Science,
2020
DOI:10.1007/s11630-020-1212-7
|
|
|
[10]
|
On the applicability of continuum scale models for ultrafast nanoscale liquid-vapor phase change
International Journal of Multiphase Flow,
2020
DOI:10.1016/j.ijmultiphaseflow.2020.103508
|
|
|
[11]
|
Simulation on flow, heat transfer and stress characteristics of large-diameter thick-walled gas cylinders in quenching process under different water spray volumes
Journal of Central South University,
2019
DOI:10.1007/s11771-019-4245-x
|
|
|
[12]
|
Advances in Materials, Mechanical and Industrial Engineering
Lecture Notes on Multidisciplinary Industrial Engineering,
2019
DOI:10.1007/978-3-319-96968-8_30
|
|
|
[13]
|
Die Anästhesiologie
Springer Reference Medizin,
2019
DOI:10.1007/978-981-13-6416-7_22
|
|
|
[14]
|
High mass flux air atomized spray with subcooled water: A novel methodology to enhance the heat transfer rate in film boiling regime
International Journal of Heat and Mass Transfer,
2018
DOI:10.1016/j.ijheatmasstransfer.2017.12.051
|
|
|
[15]
|
The influence of container geometry and thermal conductivity on evaporation of water at low pressures
Scientific Reports,
2018
DOI:10.1038/s41598-018-33333-x
|
|
|
[16]
|
Cooling mechanisms on run out table: A technical review
Materials Today: Proceedings,
2018
DOI:10.1016/j.matpr.2018.06.152
|
|
|
[17]
|
Nozzle positioning for ultra-fast cooling of steel strips in a run out table
Materials Today: Proceedings,
2018
DOI:10.1016/j.matpr.2018.06.211
|
|
|
[18]
|
The influence of container geometry and thermal conductivity on evaporation of water at low pressures
Scientific Reports,
2018
DOI:10.1038/s41598-018-33333-x
|
|
|
[19]
|
Upward and downward facing high mass flux spray cooling with additives: A novel technique to enhance the heat removal rate at high initial surface temperature
Heat and Mass Transfer,
2017
DOI:10.1007/s00231-017-2258-2
|
|
|
[20]
|
Effect of Impingement Density and Nozzle to Target Distance on Spray Cooling of Steel Plate—An Experimental Investigation
Heat Transfer Engineering,
2017
DOI:10.1080/01457632.2016.1239946
|
|
|
[21]
|
Influence of spray characteristics on heat flux in dual phase spray impingement cooling of hot surface
Alexandria Engineering Journal,
2016
DOI:10.1016/j.aej.2016.07.015
|
|
|
[22]
|
Thermal characteristics of air-water spray impingement cooling of hot metallic surface under controlled parametric conditions
Journal of Thermal Science,
2016
DOI:10.1007/s11630-016-0859-6
|
|
|
[23]
|
Heat transfer characteristic research during jet impinging on top/bottom hot steel plate
International Journal of Heat and Mass Transfer,
2016
DOI:10.1016/j.ijheatmasstransfer.2016.05.083
|
|
|