K. J. Akinluwade, A. R. Adetunji, M. O. Adeoye, L. E. Umoru, P. N. Kalu, A. T. Taiwo, O. O. Adewoye
Department of Materials Science & Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria.
Department of Mechanical Engineering, Florida State University, Florida, USA.
National Agency for Science and Engineering Infrastructure (NASENI), Abuja, Nigeria.
DOI: 10.4236/jmmce.2012.111002   PDF    HTML     5,226 Downloads   6,744 Views   Citations

Abstract

A safe and environmentally friendly cyaniding method has been developed to mitigate the toxic impacts of cyanide salts on the environment during conventional cyaniding. The method entails in-situ diffusion of nascent cyanide from mature cassava leaves into the surface of mild steel components via pack-cyaniding. Both high-temperature in-situ diffusion into austenite and low-temperature in-situ diffusion into ferrite were explored. Results from light and scanning electron microscopic studies showed that surface hardness of the steel components was substantially increased. The waste product was a harmless biodegradable organic compound that posed no disposal threats. This study is important for increasing the wear resistance of ferrous parts for a longer service life in application without polluting the environment.

Keywords

environmentally friendly, cassava leaves, scanning electron microscope, in-situ pack-cyaniding, biodegradable, clean technology

Share and Cite:

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	Rajan, T. V., Sharma, C. P. and Sharma, A. (1988) ‘Heat Treatment: Principles and Techniques’. Prentice Hall of India Private Limited, New Delhi.
[2]	Hutchings, I. M. (1992) ‘Tribology: Friction and Wear of Engineering Materials’. Edward Arnold, London
[3]	Fathi, H. (1997) Handbook of Extractive Metallurgy. Vol.1, The Metal Industry, Ferrous Metals. Wilhelm Oswald & Co., Wilhelm.
[4]	Mehrkam, Q. D., Easterday, J. R., Payne, B. R., Foreman, R. W., Vukovich, D. and Godding, A. D., (1991) “Liquid Nitriding of Steels”. In: Heat Treating—ASM Handbook (Revised vol. 4). Stephen M. Copley, editor. USA., pp. 923-943
[5]	Akinluwade, K. J. (2010) Low and High Temperature Pack-cyaniding of Mild Steel in Pulverized Cassava Leaves. M. Sc. Thesis of Obafemi Awolowo University, Ile-Ife, Nigeria.
[6]	Adetunji, A. R., AttahDaniel, B. E., Adeoye, M. O., Umoru, L. E, Adeyinwo, C. E., Pelemo, D. A., Olasupo, O. A. and Adewoye, O. O. (2008). “Metallographic Studies of Pack Cyanided Mild Steel Using Cassava Leaves.” Materials and Manufacturing Processes. 23(4), pp. 385-390 Ibironke, O. J., Falaiye, A., Ojumu, T. V., Odo, E. A. and Adewoye, O. O. (2004) Case-Depth
[7]	Studies of Pack Cyaniding of Mild Steel Using Cassava Leaves; Materials and Manufacturing Processes. 19(5) pp. 899-905
[8]	Conn, E. E. (1973) “Cyanogenic Glucosides: Their Occurrence, Biosynthesis and Function”. In: Chronic Cassava Toxicity. (Nestel, B. and MacIntyre, R., Eds). Conference Proceedings IDRC, Ottawa, Canada., pp.55-63
[9]	Hosel, W. (1981) The Enzymatic Hydrolysis of Cyanogenic Glucosides. B. Vennesland, E. E. Conn, C. J. Knowles, J. Westley, & F. Wissing (Eds.). Cyanide in Biology., pp. 217–232 Academic Press, London.
[10]	Foreman, R. W. (1991) Pack Carburizing of Steel. In: Heat Treating—ASM Handbook (Revised vol. 4). Stephen M. Copley, editor. USA, pp. 749-755