Luoyang Gaohua Environmental Cooling Technology Co., Ltd

Closed circuit cooling towers, or evaporative fluid coolers, keep the system clean and contaminant-free in a closed loop. This creates two separate fluid circuits: (1) an external circuit, in which spray water circulates over the coil and mixes with the outside air, and (2) an internal circuit, in which the process fluid to be cooled circulates inside the coil. During operation, heat is transferred from the warm fluid in the coil to the spray water, then to the atmosphere as some water evaporates. In addition to chiller applications and industrial process cooling, closed-circuit cooling towers are often used with heat pump systems, where closed-loop cooling is required. https://lnkd.in/giq8brnZ

The wet and dry closed cooling tower is designed and developed to meet the high-efficiency cooling and condensation of high-temperature and high-pressure working fluids in the chemical industry. It is mainly applied to complete sets of energy-saving equipment used in production systems such as methanol (synthetic ammonia) in the heat exchange equipment market at home and abroad. The dry and wet closed cooling tower produced by Luoyang Gaohua has been upgraded on the basis of the original process, extending the service life of the equipment, providing heat exchange efficiency, and further expanding the new idea of latent heat exchange instead of sensible heat exchange. Application: Interstage cooling of methanol/synthetic ammonia compressor Syngas cooling and condensation Natural gas or coke oven gas conversion process gas cooling tower Purification process cooling (condensation) Urea exhaust gas recovery Steam condensation of steam turbine, etc https://lnkd.in/g2gvkk6V

What is the purpose of fill in a cooling tower? #filling #Fill #Filler #PVCFill #filmfill #driftelimimator #coolingtowers #coolingsystem #closedcoolingtower The purpose of fill in a cooling tower is to cool water to make full use of water resources, reduce the load of urban tap water supply network, and reduce the operating cost, cooling water is treated by cooling tower and recycled. Matters needing attention when replacing the cooling tower packing.  ♦ The waveforms between the monolithic and the monolithic must be diagonally staggered so that they have good thermal resistance.  ♦ The cuboidal packing assembly unit is most suitable for matching with the square tower and with the circumference of the circular cooling tower. A gap will be formed, and it needs to be filled with a different number of single sheets according to the size of the gap.  ♦ Once the plug is blocked, it is not easy to clean. When the jam is serious, it needs to be replaced as a whole and it will increase the cost.

How does the Air Cooled Condenser System Operate? #aircooledcondenser #ACC #aircooler #aircooledheatexchanger #heatexchanger #SingleRowtypeCondenser Air Cooled Condenser's strongest point is the air cooling system which is no need for water. This means that users can eliminate water usage, choose plant sites flexibly, and maintain them easily. Firstly, the compactness translates into savings in the initial capital cost and reduces the installation space. Secondly, the operation cost is low because of a fewer number of fans and motors. Single-Row type Condenser characteristic: Finned tube type: Corrugated fin type Merits and Demerits -Increased effective surface area -Elimination of flooding in reflux tube -Elimination of sub-cooling -Brazing: Less bond resistance -Less air side pressure drop (Low power consumption) -Avoid gas blanketing -Simplified design and analysis Application: High capacity as a big power plant Bare tube: Aluminum coated / cladded carbon steel

What is the fill in a cooling tower? #coolingtowers #coolingsystem #PVCfills #filmfiller #closedcoolingtower #PPFilling The cooling tower is a cooling device, which makes the hot water in the tower be cooled mainly by the evaporative cooling of water. To make full use of water resources, reduce the load of the urban tap water supply network, and reduce the operating cost, cooling water is treated by the cooling tower and recycled. "Fill" is a medium that is used in cooling towers to increase the surface area available for the water. In a cooling tower, the important is cooling tower fill. Fill is a plastic sheet used in cooling towers to build the more surface region of the tower. If we want to expand the surface, we need to consider into making more contact with water and fills, so that water will have more surface area in the cooling tower fill. Cooling tower fills make hot water have much more surface area with sheet and air and the medium of tremendously extended film fills so that hot water is cooled quickly. After being cooled the water is flowed into a water container from which it is pumped again to cool other hot water, and the warm air leaves the fill and releases from the above of the cooling towers, and like this Continuously cooling air from the bottom and release warm air from above to keep cooling tower cooling hot water continuously, to reduce the load of urban tap water supply network, and reduce the operating cost, So that we could make full use of water resources. The filler is the most important part of the cooling tower, and its efficiency depends on the extent to which the cooling water and air are fully in contact with the filler. Filler temperature 50 °C ~ 68 °C, anti-aging, excellent performance, anti-ultraviolet, long life. Cooling tower fill should be made to have more contact with water and fills, and longest time as possible. Fill allows the water to form thin flowing sheets to expose as much water surface area as possible to the interacting flow.

Evaporative condensers are used in refrigeration systems as an efficient means of heat rejection. Their installation and specifically the installation of the piping to and from the evaporative condenser has a direct effect on their operation and the overall energy efficiency of the refrigeration system.  #evaporativecondenser #evaporativecooling #closedcoolingtower #coolingtowers #condenseurévaporatif #condensadorevaporativo