Impact of Dual Variable Speed and Inlet Valve Control on the Efficiency and Operating Range of Low-Head Contra-Rotating Pump-Turbines - Daan P. K. Truijen; Justus P. Hoffstaedt; Jonathan Fahlbeck; Antonio Jarquin Laguna; Håkan Nilsson; Kurt Stockman; Jeroen D. M. De Kooning (IEEE Access, 2024)

Reliability of Linear Losses-to-Power Scaling Method of Electric Drive Systems - Ayoub Aroua; Luis Ramirez; Walter Lhomme; Florian Verbelen; Philippe Delarue; Alain Bouscayrol; Peter Sergeant; Kurt Stockman (IEEE Trans. Veh. Technol., 2024)

A Digital Twin Framework for Virtual Re-Commissioning of Work-Drive Systems Using CAD-based Motion Co-Simulation - Rémy Carlier; Joris Gillis; Erwin Rademakers; Gianni Borghesan; Pieter De Clercq; Chris Ganseman; Kurt Stockman; Jeroen D. M. De Kooning (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2023, Seattle, WA, USA, June 28-30, 2023, 2023)

Tension ripple-free dancer control of a web processing machine - Jasper De Viaene; Yentl Thielemans; Arul K. Mathivanan; Jeroen D. M. De Kooning; Kurt Stockman (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2023, Seattle, WA, USA, June 28-30, 2023, 2023)

Sensitivity Analysis Framework for the Evaluation of Modular Drivetrain Architectures - David van Os; Théo Tuerlinckx; Hendrik Vansompel; Peter Sergeant; Koen Laurijssen; Kurt Stockman (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2023, Seattle, WA, USA, June 28-30, 2023, 2023)

Non-linear Friction Characterisation of the Unwinding Group in a Web Processing Machine - Arul K. Mathivanan; Jasper De Viaene; Yentl Thielemans; Jeroen D. M. De Kooning; Kurt Stockman (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2023, Seattle, WA, USA, June 28-30, 2023, 2023)

Evaluation Framework for the Comparison of Modular Drivetrain Architectures - David van Os; Koen Laurijssen; Hendrik Vansompel; Peter Sergeant; Niels Divens; Kurt Stockman (IEEE International Conference on Mechatronics, ICM 2023, Loughborough, United Kingdom, March 15-17, 2023, 2023)

Stiffness estimation of a lumped mass-spring system using sliding DFT - Foeke Vanbecelaere; Michael Monte; Kurt Stockman (IEEE International Conference on Mechatronics, ICM 2023, Loughborough, United Kingdom, March 15-17, 2023, 2023)

Self-learning current optimizing control for conventional stepping motor drive technique based on step pulses - Jasper De Viaene; David Ceulemans; Stijn Derammelaere; Kurt Stockman (Trans. Inst. Meas. Control, 2022)

Identification of Dynamic Behaviour in a Modular Drivetrain - David van Os; Hendrik Vansompel; Peter Sergeant; Koen Laurijssen; Niels Divens; Kurt Stockman (10th International Conference on Control, Mechatronics and Automation, ICCMA 2022, Belval, Luxembourg, November 9-12, 2022, 2022)

Energy Optimal Point-to-Point Motion Profile Optimization - Nick Van Oosterwyck; Foeke Vanbecelaere; Ferre Knaepkens; Michael Monte; Kurt Stockman; Annie Cuyt; Stijn Derammelaere (CoRR, 2022)

Beamforming Applied to Ultrasound Analysis in Detection of Bearing Defects - Thomas Verellen; Florian Verbelen; Kurt Stockman; Jan Steckel (Sensors, 2021)

Drivetrain Architectures for a Mechanically Decoupled Contra-Rotating Reversible Pump-Turbine - Daan P. K. Truijen; Jeroen D. M. De Kooning; Kurt Stockman (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2021, Delft, The Netherlands, July 12-16, 2021, 2021)

Drivetrain Torque Ripple Reduction With a Modular Motor Architecture - David van Os; Hendrik Vansompel; Jelle De Decker; Peter Sergeant; Thomas Vandenhove; Stephan Schlimpert; Kurt Stockman (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2021, Delft, The Netherlands, July 12-16, 2021, 2021)

Modelling Non-Linear Dynamic Disturbances in a Linear Track Positioning System - Rémy Carlier; Jeroen D. M. De Kooning; Kurt Stockman (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2021, Delft, The Netherlands, July 12-16, 2021, 2021)

On-line Estimation of the Mechanical Stiffness of Rod Mechanisms - Foeke Vanbecelaere; Kurt Stockman; Michael Monte (9th International Conference on Control, Mechatronics and Automation, ICCMA 2021, Belval, Luxembourg, November 11-14, 2021, 2021)

Modular Drivetrains for Increased Performance and Reliability - Thomas Vandenhove; Reginald Diltoer; Bert Lenaerts; David van Os; Kurt Stockman; Stephan Schlimpert (IEEE International Conference on Mechatronics, ICM 2021, Kashiwa, Japan, March 7-9, 2021, 2021)

Sizing Methodology Based on Scaling Laws for a Permanent Magnet Electrical Variable Transmission - Florian Verbelen; Ahmed Abdallh; Hendrik Vansompel; Kurt Stockman; Peter Sergeant (IEEE Trans. Ind. Electron., 2020)

Realtime locomotion control of a snakeboard robot based on a novel model, enabling better physical insights - Stijn Derammelaere; Cosmin Copot; Michiel Haemers; Florian Verbelen; Bram Vervisch; Clara M. Ionescu; Kurt Stockman (Eur. J. Control, 2019)

CAD Enabled Trajectory optimization and Accurate Motion Control for Repetitive Tasks - Nick Van Oosterwyck; Foeke Vanbecelaere; Michiel Haemers; David Ceulemans; Kurt Stockman; Stijn Derammelaere (15th IEEE International Conference on Control and Automation, ICCA 2019, Edinburgh, United Kingdom, July 16-19, 2019, 2019)

Identification of Dynamic Systems with Position Dependent Load Parameters - Foeke Vanbecelaere; Stijn Derammelaere; Jos Knockaert; Kurt Stockman; Michael Monte (7th International Conference on Control, Mechatronics and Automation, ICCMA 2019, Delft, The Netherlands, November 6-8, 2019, 2019)

Automatic tuning of predictive control in a hydrostatic drive train system in nominal operation - Clara M. Ionescu; Michiel Haemers; Anca Maxim; Cosmin Copot; Stijn Derammelaere; Kurt Stockman (23rd International Conference on System Theory, Control and Computing, ICSTCC 2019, Sinaia, Romania, October 9-11, 2019, 2019)

A Multi-Channel Temperature Monitoring System for Inverter-Fed Electrical Machines - Pieter Nguyen Phuc; Dimitar V. Bozalakov; Hendrik Vansompel; Kurt Stockman; Guillaume Crevecoeur (IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, October 14-17, 2019, 2019)

Co-design of controller and setup configuration using Genetic Algorithm - Michiel Haemers; Stijn Derammelaere; Kurt Stockman (22nd IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2017, Limassol, Cyprus, September 12-15, 2017, 2017)

Online Identification of a Mechanical System in Frequency Domain Using Sliding DFT - Niko Nevaranta; Stijn Derammelaere; Jukka Parkkinen; Bram Vervisch; Tuomo Lindh; Kurt Stockman; Markku Niemela; Veli-Pekka Pyrhonen; Juha Pyrhönen (IEEE Trans. Ind. Electron., 2016)

Open loop control of a stepping motor with step loss detection and stall detection using back-EMF based load angle estimation - Stijn Derammelaere; Florian Verbelen; Kurt Stockman (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2014, Besancon, France, July 8-11, 2014, 2014)

Energy efficiency measurement procedure for gearboxes in their entire operating range - Stijn Derammelaere; Steve Dereyne; Pieter Defreyne; Elewijn Algoet; Florian Verbelen; Kurt Stockman (2014 IEEE Industry Application Society Annual Meeting, Vancouver, BC, Canada, October 5-9, 2014, 2014)

ISO Efficiency Curves of a -Two-Phase Hybrid Stepping Motor - Stijn Derammelaere; Bram Vervisch; Johannes Cottyn; Bart Vanwalleghem; Kurt Stockman; Frederik De Belie; Lieven Vandevelde; Peter Cox; Griet Van den Abeele (Annual Meeting of the IEEE Industry Applications Society, IAS 2010, Houston, TX, USA, 3-7 October, 2010, Proceedings, 2010)

Advanced Nonlinear Modelling Techniques for Switched Reluctance Machines - Frederik D'hulster; Kurt Stockman; Jan Desmet; Ronnie Belmans (Proceedings of the IASTED International Conference on Modelling, Simulation and Optimization - MSO 2003, Banff, Canada, July 2-4, 2003, 2003)