Gradle User Manual: Version 8.11.1

The embedded Kotlin has been updated from 1.9.24 to Kotlin 2.0.20. Also see the Kotlin 2.0.10 and Kotlin 2.0.0 release notes.

The default kotlin-test version in JVM test suites has been upgraded to 2.0.20 as well.

Kotlin DSL scripts are still compiled with Kotlin language version set to 1.8 for backward compatibility.

The type of the property UpdateDaemonJvm.jvmVersion is now Property<JavaLanguageVersion>.

If you configured the task in a build script, you will need to replace:

jvmVersion = JavaVersion.VERSION_17

With:

jvmVersion = JavaLanguageVersion.of(17)

Using the CLI options to configure which JVM version to use for the Gradle Daemon has no impact.

The name-matching logic has been updated to treat numbers as word boundaries for camelCase names. Previously, a request like unique would match both uniqueA and unique1. Such a request will now fail due to ambiguity. To avoid issues, use the exact name instead of a shortened version.

This change impacts:

The JavaHome property of the ForkOptions type has been deprecated and will be removed in Gradle 9.0.

Use JVM Toolchains, or the executable property instead.

Starting in Gradle 9.0, mutating configurations in a script’s buildscript block will result in an error. This applies to project, settings, init, and standalone scripts.

The buildscript configurations block is only intended to control buildscript classpath resolution.

Consider the following script that creates a new buildscript configuration in a Settings script and resolves it:

This pattern is sometimes used to resolve dependencies in Settings, where there is no other way to obtain a Configuration. Resolving dependencies in this context is not recommended. Using a detached configuration is a possible but discouraged alternative.

The above example can be modified to use a detached configuration:

Starting in Gradle 9.0, selecting variants by name from non-Ivy external components will be forbidden.

Selecting variants by name from local components will still be permitted; however, this pattern is discouraged. Variant aware dependency resolution should be preferred over selecting variants by name for local components.

The following dependencies will fail to resolve when targeting a non-Ivy external component:

Starting in Gradle 9.0, manually adding configuration instances to a configuration container will result in an error. Configurations should only be added to the container through the eager or lazy factory methods. Detached configurations and copied configurations should not be added to the container.

Calling the following methods on ConfigurationContainer will be forbidden: - add(Configuration) - addAll(Collection) - addLater(Provider) - addAllLater(Provider)

The ProjectDependency#getDependencyProject() method has been deprecated and will be removed in Gradle 9.0.

Accessing the mutable project instance of other projects should be avoided.

To discover details about all projects that were included in a resolution, inspect the full ResolutionResult. Project dependencies are exposed in the DependencyResult. See the user guide section on programmatic dependency resolution for more details on this API. This is the only reliable way to find all projects that are used in a resolution. Inspecting only the declared `ProjectDependency`s may miss transitive or substituted project dependencies.

To get the identity of the target project, use the new Isolated Projects safe project path method: ProjectDependency#getPath().

To access or configure the target project, consider this direct replacement:

This approach will not fetch project instances from different builds.

The ResolvedConfiguration.getFiles() and LenientConfiguration.getFiles() methods have been deprecated and will be removed in Gradle 9.0.

These deprecated methods do not track task dependencies, unlike their replacements.

The AbstractOptions class has been deprecated and will be removed in Gradle 9.0. All classes extending AbstractOptions will no longer extend it.

As a result, the AbstractOptions#define(Map) method will no longer be present. This method exposes a non-type-safe API and unnecessarily relies on reflection. It can be replaced by directly setting the properties specified in the map.

Additionally, CompileOptions#fork(Map), CompileOptions#debug(Map), and GroovyCompileOptions#fork(Map), which depend on define, are also deprecated for removal in Gradle 9.0.

Consider the following example of the deprecated behavior and its replacement:

The Dependency#contentEquals(Dependency) method has been deprecated and will be removed in Gradle 9.0.

The method was originally intended to compare dependencies based on their actual target component, regardless of whether they were of different dependency type. The existing method does not behave as specified by its Javadoc, and we do not plan to introduce a replacement that does.

Potential migrations include using Object.equals(Object) directly, or comparing the fields of dependencies manually.

The Project#exec(Closure), Project#exec(Action), Project#javaexec(Closure), Project#javaexec(Action) methods have been deprecated and will be removed in Gradle 9.0.

These methods are scheduled for removal as part of the ongoing effort to make writing configuration-cache-compatible code easier. There is no way to use these methods without breaking configuration cache requirements so it is recommended to migrate to a compatible alternative. The appropriate replacement for your use case depends on the context in which the method was previously called.

At execution time, for example in @TaskAction or doFirst/doLast callbacks, the use of Project instance is not allowed when the configuration cache is enabled. To run external processes, tasks should use an injected ExecOperation service, which has the same API and can act as a drop-in replacement. The standard Java/Groovy/Kotlin process APIs, like java.lang.ProcessBuilder can be used as well.

At configuration time, only special Provider-based APIs must be used to run external processes when the configuration cache is enabled. You can use ProviderFactory.exec and ProviderFactory.javaexec to obtain the output of the process. A custom ValueSource implementation can be used for more sophisticated scenarios. The configuration cache guide has a more elaborate example of using these APIs.

Detached configurations should not extend other configurations using extendsFrom.

This behavior has been deprecated and will become an error in Gradle 9.0.

To create extension relationships between configurations, you should change to using non-detached configurations created via the other factory methods present in the project’s ConfigurationContainer.

The Gradle#useLogger(Object) method has been deprecated and will be removed in Gradle 9.0.

This method was originally intended to customize logs printed by Gradle. However, it only allows intercepting a subset of the logs and cannot work with the configuration cache. We do not plan to introduce a replacement for this feature.

Gradle’s API allowed some properties that represented nested groups of properties to be replaced wholesale with a setter method. This was awkward and unusual to do and would sometimes require the use of internal APIs. The setters for these properties will be removed in Gradle 9.0 to simplify the API and ensure consistent behavior. Instead of using the setter method, these properties should be configured by calling the getter and configuring the object directly or using the convenient configuration method. For example, in CompileOptions, instead of calling the setForkOptions setter, you can call getForkOptions() or forkOptions(Action).

The affected properties are:

These methods on Javadoc have been deprecated and will be removed in Gradle 9.0.

The JavaCompile tasks may sometimes fail when using a JRE instead of a JDK. This is due to changes in the toolchain resolution code, which enforces the presence of a compiler when one is requested. The java-base plugin uses the JavaCompile tasks it creates to determine the default source and target compatibility when sourceCompatibility/targetCompatibility or release are not set. With the new enforcement, the absence of a compiler causes this to fail when only a JRE is provided, even if no compilation is needed (e.g., in projects with no sources).

This can be fixed by setting the sourceCompatibility/targetCompatibility explicitly in the java extension, or by setting sourceCompatibility/targetCompatibility or release in the relevant task(s).

The embedded Kotlin has been updated from 1.9.23 to Kotlin 1.9.24.

Ant has been updated to Ant 1.10.14.

JaCoCo has been updated to 0.8.12.

Groovy has been updated to Groovy 3.0.22.

Starting in Gradle 9.0, Gradle will require JVM 17 or later to run. Most Gradle APIs will be compiled to target JVM 17 bytecode.

Gradle will still support compiling Java code to target JVM version 6 or later. The target JVM version of the compiled code can be configured separately from the JVM version used to run Gradle.

All Gradle clients (wrapper, launcher, Tooling API and TestKit) will remain compatible with JVM 8 and will be compiled to target JVM 8 bytecode. Only the Gradle daemon will require JVM 17 or later. These clients can be configured to run Gradle builds with a different JVM version than the one used to run the client:

Alternatively, the JAVA_HOME environment variable can be set to a JVM 17 or newer, which will run both the client and daemon with the same version of the JVM.

Running Gradle builds with --no-daemon or using ProjectBuilder in tests will require JVM version 17 or later. The worker API will remain compatible with JVM 8, and running JVM tests will require JVM 8.

We decided to upgrade the minimum version of the Java runtime for a number of reasons:

In prior versions of Gradle, it was possible to consume non-consumable configurations of a project using published Ivy metadata. An Ivy dependency may sometimes be substituted for a project dependency, either explicitly through the DependencySubstitutions API or through included builds. When this happens, configurations in the substituted project could be selected that were marked as non-consumable.

Consuming non-consumable configurations in this manner is deprecated and will result in an error in Gradle 9.0.

In prior versions of Gradle, it was possible to extend a configuration in a different project.

The hierarchy of a Project’s configurations should not be influenced by configurations in other projects. Cross-project hierarchies can lead to unexpected behavior when configurations are extended in a way that is not intended by the configuration’s owner.

Projects should also never access the mutable state of another project. Since Configurations are mutable, extending configurations across project boundaries restricts the parallelism that Gradle can apply.

Extending configurations in different projects is deprecated and will result in an error in Gradle 9.0.

In previous versions of Gradle, toolchain provisioning could leave a partially provisioned toolchain in place with a marker file indicating that the toolchain was fully provisioned. This could lead to strange behavior with the toolchain. In Gradle 8.9, the toolchain is fully provisioned before the marker file is written. However, to not detect potentially broken toolchains, a different marker file (.ready) is used. This means all your existing toolchains will be re-provisioned the first time you use them with Gradle 8.9. Gradle 8.9 also writes the old marker file (provisioned.ok) to indicate that the toolchain was fully provisioned. This means that if you return to an older version of Gradle, an 8.9-provisioned toolchain will not be re-provisioned.

The embedded Kotlin has been updated from 1.9.22 to Kotlin 1.9.23.

In previous versions of Gradle, the daemon log file, located at $GRADLE_USER_HOME/daemon/8.11.1/, was encoded with the default JVM encoding. This file is now always encoded with UTF-8 to prevent clients who may use different default encodings from reading data incorrectly. This change may affect third-party tools trying to read this file.

In previous versions of Gradle, Java projects that had no declared dependencies could implicitly compile against Gradle’s runtime classes. This means that some projects were able to compile without any declared dependencies even though they referenced Gradle runtime classes. This situation is unlikely to arise in projects since IDE integration and test execution would be compromised. However, if you need to utilize the Gradle API, declare a gradleApi dependency or apply the java-gradle-plugin plugin.

References to Gradle types not part of the public API should be avoided, as their direct use is unsupported. Gradle internal implementation classes may suffer breaking changes (or be renamed or removed) from one version to another without warning.

Users need to distinguish between the API and internal parts of the Gradle codebase. This is typically achieved by including internal in the implementation package names. However, before this release, the configuration cache subsystem did not follow this pattern.

To address this issue, all code initially under the org.gradle.configurationcache* packages has been moved to new internal packages (org.gradle.internal.*).

The Java compilation infrastructure has been updated to use the Problems API. This change will supply the Tooling API clients with structured, rich information about compilation issues.

The feature should not have any visible impact on the usual build output, with JDK8 being an exception. When annotation processors are used in the compiler, the output message differs slightly from the previous ones.

The change mainly manifests itself in typename printed. For example, Java standard types like java.lang.String will be reported as java.lang.String instead of String.

To ensure the accuracy of dependency resolution, Gradle checks that Configurations are not mutated after they have been used as part of a dependency graph.

In prior versions of Gradle, many of these circumstances were detected and handled by failing the build. However, some cases went undetected or did not trigger build failures. In Gradle 9.0, all changes to a configuration, once observed, will become an error. After a configuration of any type has been observed, it should be considered immutable. This validation covers the following properties of a configuration:

Starting in Gradle 8.8, a deprecation warning will be emitted in cases that were not already an error. Usually, this deprecation is caused by mutating a configuration in a beforeResolve hook. This hook is only executed after a configuration is fully resolved but not when it is partially resolved for computing task dependencies.

Consider the following code that showcases the deprecated behavior:

For the following use cases, consider these alternatives when replacing a beforeResolve hook:

In an ongoing effort to simplify the Gradle API, the following methods that support filtering based on declared dependencies have been deprecated:

On Configuration:

On ResolvedConfiguration:

On LenientConfiguration:

To mitigate this deprecation, consider the example below that leverages the ArtifactView API along with the componentFilter method to select a subset of a Configuration’s artifacts:

Contrary to the deprecated Dependency filtering methods, componentFilter does not consider the transitive dependencies of the component being filtered. This allows for more granular control over which artifacts are selected.

Task and Configuration have a Namer inner class (also called Namer) that can be used as a common way to retrieve the name of a task or configuration. Now that these types implement Named, these classes are no longer necessary and have been deprecated. They will be removed in Gradle 9.0. Use Named.Namer.INSTANCE instead.

The super interface, Namer, is not being deprecated.

A new API for defining file permissions has been added in Gradle 8.3, see:

The new API has now been promoted to stable, and the old methods have been deprecated:

In previous versions, cleanup of the local build cache entries ran every 24 hours, and this interval could not be configured. The retention period was configured using buildCache.local.removeUnusedEntriesAfterDays.

In Gradle 8.0, a new mechanism was added to configure the cleanup and retention periods for various resources in Gradle User Home. In Gradle 8.8, this mechanism was extended to permit the retention configuration of local build cache entries, providing improved control and consistency.

If you want build-cache entries to be retained for 30 days, remove any calls to the deprecated method:

Add a file like this in ~/.gradle/init.d:

Calling buildCache.local.removeUnusedEntriesAfterDays is deprecated, and this method will be removed in Gradle 9.0. If set to a non-default value, this deprecated setting will take precedence over Settings.caches.buildCache.setRemoveUnusedEntriesAfterDays().

In settings.gradle.kts (Kotlin DSL), you can use gradle-enterprise in the plugins block to apply the Gradle Enterprise plugin with the same version as gradle --scan.

There is no equivalent to this in settings.gradle (Groovy DSL).

Gradle Enterprise has been renamed Develocity, and the com.gradle.enterprise plugin has been renamed com.gradle.develocity. Therefore, the gradle-enterprise plugin block extension has been deprecated and will be removed in Gradle 9.0.

The Develocity plugin must be applied with an explicit plugin ID and version. There is no develocity shorthand available in the plugins block:

If you want to continue using the Gradle Enterprise plugin, you can specify the deprecated plugin ID:

We encourage you to use the latest released Develocity plugin version, even when using an older Gradle version.

We have implemented several refactorings of the Problems API, including a significant change in how problem definitions and contextual information are handled. The complete design specification can be found here.

In implementing this spec, we have introduced the following breaking changes to the ProblemSpec interface:

The following incubating API introduced in 8.7 have been removed:

Replacements that better handle conventions are under consideration for a future 8.x release.

Groovy has been updated to Groovy 3.0.21.

Since the previous version was 3.0.17, the 3.0.18 and 3.0.19, and 3.0.20 changes are also included.

Some changes in static type checking have resulted in source-code incompatibilities. Starting with 3.0.18, if you cast a closure to an Action without generics, the closure parameter will be Object instead of any explicit type specified. This can be fixed by adding the appropriate type to the cast, and the redundant parameter declaration can be removed:

ASM was upgraded from 9.6 to 9.7 to ensure earlier compatibility for Java 23.

The embedded Kotlin has been updated from 1.9.10 to Kotlin 1.9.22.

Apache SSHD has been updated from 2.0.0 to 2.10.0.

JSch has been replaced by com.github.mwiede:jsch and updated from 0.1.55 to 0.2.16

Eclipse JGit has been updated from 5.7.0 to 5.13.3.

This includes reworking the way that Gradle configures JGit for SSH operations by moving from JSch to Apache SSHD.

Apache Commons Compress has been updated from 1.21 to 1.25.0. This change may affect the checksums of the produced jars, zips, and other archive types because the metadata of the produced artifacts may differ.

ASM was upgraded from 9.5 to 9.6 for better support of multi-release jars.

The version catalog parser has been upgraded and is now compliant with version 1.0.0 of the TOML spec.

This should not impact catalogs that use the recommended syntax or were generated by Gradle for publication.

Using plugin conventions has been emitting warnings since Gradle 8.2. Now, registering plugin conventions will also trigger deprecation warnings. For more information, see the section about plugin convention deprecation.

In Kotlin DSL, it is possible to reference a task or other domain object by its name using the "name"() notation.

There are several ways to look up an element in a container by name:

The first notation is deprecated and will be removed in Gradle 9.0. Instead of using "name"() to reference a task or domain object, use named("name") or one of the other supported notations.

The above example would be written as:

The Gradle API and Groovy build scripts are not impacted by this.

Before Gradle 8.3, Gradle would decode a CharSequence given to Project.uri(Object) using an algorithm that accepted invalid URLs and improperly decoded others. Gradle now uses the URI class to parse and decode URLs, but with a fallback to the legacy behavior in the event of an error.

Starting in Gradle 9.0, the fallback will be removed, and an error will be thrown instead.

To fix a deprecation warning, invalid URLs that require the legacy behavior should be re-encoded to be valid URLs, such as in the following examples:

The SelfResolvingDependency interface has been deprecated for removal in Gradle 9.0. This type dates back to the first versions of Gradle, where some dependencies could be resolved independently. Now, all dependencies should be resolved as part of a dependency graph using a Configuration.

Currently, ProjectDependency and FileCollectionDependency implement this interface. In Gradle 9.0, these types will no longer implement SelfResolvingDependency. Instead, they will both directly implement Dependency.

As such, the following methods of ProjectDependency and FileCollectionDependency will no longer be available:

Consider the following scripts that showcase the deprecated interface and its replacement:

These members will be removed in Gradle 9.0.

JaCoCo has been updated to 0.8.11.

The incubating DependencyAdder interface has been renamed to DependencyCollector. A getDependencies method has been added to the interface that returns all declared dependencies.

Calling registerFeature on the java extension using the main source set is deprecated and will change behavior in Gradle 9.0.

Currently, features created while calling usingSourceSet with the main source set are initialized differently than features created while calling usingSourceSet with any other source set. Previously, when using the main source set, new implementation, compileOnly, runtimeOnly, api, and compileOnlyApi configurations were created, and the compile and runtime classpaths of the main source set were configured to extend these configurations.

Starting in Gradle 9.0, the main source set will be treated like any other source set. With the java-library plugin applied (or any other plugin that applies the java plugin), calling usingSourceSet with the main source set will throw an exception. This is because the java plugin already configures a main feature. Only if the java plugin is not applied will the main source set be permitted when calling usingSourceSet.

Code that currently registers features with the main source set, such as:

Should instead, create a separate source set for the feature and register the feature with that source set:

Publishing dependencies with an explicit artifact with a name different from the dependency’s artifactId to Maven repositories has been deprecated. This behavior is still permitted when publishing to Ivy repositories. It will result in an error in Gradle 9.0.

When publishing to Maven repositories, Gradle will interpret the dependency below as if it were declared with coordinates org:notfoo:1.0:

Instead, this dependency should be declared as:

The ArtifactIdentifier class has been deprecated for removal in Gradle 9.0.

Starting in Gradle 9.0, mutating dependencies sourced from a DependencyCollector, after those dependencies have been observed will result in an error. The DependencyCollector interface is used to declare dependencies within the test suites DSL.

Consider the following example where a test suite’s dependency is mutated after it is observed:

In the above example, the build logic uses iteration and mutation to try to set a default version for a particular dependency if the version is not already set. Build logic like the above example creates challenges in resolving declared dependencies, as reporting tools will display this dependency as if the user declared the version as "2.0", even though they never did. Instead, the build logic can avoid iteration and mutation by declaring a preferred version constraint on the dependency’s coordinates. This allows the dependency management engine to use the version declared on the constraint if no other version is declared.

Consider the following example that replaces the above iteration with an indiscriminate preferred version constraint:

The embedded Kotlin has been updated to Kotlin 1.9.20.

The groovy-base plugin is now responsible for configuring source and target compatibility version conventions on all GroovyCompile tasks.

If you are using this task without applying grooy-base, you will have to manually set compatibility versions on these tasks. In general, the groovy-base plugin should be applied whenever working with Groovy language tasks.

The type of argument passed to Provider.filter is changed from Predicate to Spec for a more consistent API. This change should not affect anyone using Provider.filter with a lambda expression. However, this might affect plugin authors if they don’t use SAM conversions to create a lambda.

These members will be removed in Gradle 9.0:

When resolving a Configuration, selecting that same configuration as a variant is sometimes possible. Configurations should be used for one purpose (resolution, consumption or dependency declarations), so this can only occur when a configuration is marked as both consumable and resolvable.

This can lead to circular dependency graphs, as the resolved configuration is used for two purposes.

To avoid this problem, plugins should mark all resolvable configurations as canBeConsumed=false or use the resolvable(String) configuration factory method when creating configurations meant for resolution.

In Gradle 9.0, consuming configurations in this manner will no longer be allowed and result in an error.

Gradle will warn if a project is added to the build where the associated projectDir does not exist or is not writable. Starting with version 9.0, Gradle will not run builds if a project directory is missing or read-only. If you intend to dynamically synthesize projects, make sure to create directories for them as well:

The embedded Kotlin has been updated to Kotlin 1.9.10.

Gradle 8.4 now configures XML parsers with security features enabled. If your build logic depends on old XML parsers that don’t support secure parsing, your build may fail. If you encounter a failure, check and update or remove any dependency on legacy XML parsers.

If you are unable to upgrade XML parsers coming from your build logic dependencies, you can force the use of the XML parsers built into the JVM. In OpenJDK, for example, this can be done by adding the following to gradle.properties:

See the CVE-2023-42445 advisory for more details and ways to enable secure XML processing on previous Gradle versions.

Gradle 8.4 forbids external XML entities when parsing XML documents. If you use the EAR plugin and configure the application.xml descriptor via the EAR plugin’s DSL and customize the descriptor using withXml {} and use asElement{} in the customization block, then the build will now fail for security reasons.

If you happen to use asNode() instead of asElement(), then nothing changes, given asNode() simply ignores external DTDs.

You can work around this by running your build with the javax.xml.accessExternalDTD system property set to http.

On the command line, add this to your Gradle invocation:

To make this workaround persistent, add the following line to your gradle.properties:

Note that this will enable HTTP access to external DTDs for the whole build JVM. See the JAXP documentation for more details.

The following methods on GenerateMavenPom are deprecated and will be removed in Gradle 9.0. They were never intended to be public API.

With the deprecation of Project.buildDir, buildscripts that are compiled with warnings as errors could fail if the deprecated field is used.

See the deprecation entry for details.

The TestLauncher interface is part of the Tooling API, specialized for running tests. It is a logical extension of the BuildLauncher that can only launch tasks. A discrepancy has been reported in their behavior: if the same failing test is executed, BuildLauncher will report a build failure, but TestLauncher won’t. Originally, this was a design decision in order to continue the execution and run the tests in all test tasks and not stop at the first failure. At the same time, this behavior can be confusing for users as they can experience a failing test in a successful build. To make the two APIs more uniform, we made TestLauncher also fail the build, which is a potential breaking change. Tooling API clients should explicitly pass --continue to the build to continue the test execution even if a test task fails.

The dependency resolution APIs for selecting different artifacts or files (Configuration.getIncoming().artifactView { } and Configuration.getIncoming().getArtifacts()) captured immutable copies of the underlying `Configuration’s attributes to use for variant selection. If the `Configuration’s attributes were changed after these methods were called, the artifacts selected by these methods could be unexpected.

Consider the case where the set of attributes on a Configuration is changed after an ArtifactView is created:

The inputFiles property of myTask uses an artifact view to select a different type of artifact from the configuration classpath. Since the artifact view was created before the attributes were added to the configuration, Gradle could not select the correct artifact.

Some builds may have worked around this by also putting the additional attributes into the artifact view. This is no longer necessary.

The embedded Kotlin has been updated from 1.8.20 to Kotlin 1.9.0. The Kotlin language and API levels for the Kotlin DSL are still set to 1.8 for backward compatibility. See the release notes for Kotlin 1.8.22 and Kotlin 1.8.21.

Kotlin 1.9 dropped support for Kotlin language and API level 1.3. If you build Gradle plugins written in Kotlin with this version of Gradle and need to support Gradle <7.0 you need to stick to using the Kotlin Gradle Plugin <1.9.0 and configure the Kotlin language and API levels to 1.3. See the Compatibility Matrix for details about other versions.

Gradle 8.3 updates the org.gradle.libraryelements and org.gradle.jvm.version attributes of JVM Configurations to be present at the time of creation, as opposed to previously, where they were only present after the Configuration had been resolved or consumed. In particular, the value for org.gradle.jvm.version relies on the project’s configured toolchain, meaning that querying the value for this attribute will finalize the value of the project’s Java toolchain.

Plugins or build logic that eagerly queries the attributes of JVM configurations may now cause the project’s Java toolchain to be finalized earlier than before. Attempting to modify the toolchain after it has been finalized will result in error messages similar to the following:

This situation may arise when plugins or build logic eagerly query an existing JVM Configuration’s attributes to create a new Configuration with the same attributes. Previously, this logic would have omitted the two above-noted attributes entirely, while now, the same logic will copy the attributes and finalize the project’s Java toolchain. To avoid early toolchain finalization, attribute-copying logic should be updated to query the source Configuration’s attributes lazily:

The Project.buildDir property is deprecated. It uses eager APIs and has ordering issues if the value is read in build logic and then later modified. It could result in outputs ending up in different locations.

It is replaced by a DirectoryProperty found at Project.layout.buildDirectory. See the ProjectLayout interface for details.

Note that, at this stage, Gradle will not print deprecation warnings if you still use Project.buildDir. We know this is a big change, and we want to give the authors of major plugins time to stop using it.

Switching from a File to a DirectoryProperty requires adaptations in build logic. The main impact is that you cannot use the property inside a String to expand it. Instead, you should leverage the dir and file methods to compute your desired location.

Here is an example of creating a file where the following:

Should be replaced by:

Here is another example for creating a directory where the following:

Should be replaced by:

ClientModule dependencies are deprecated and will be removed in Gradle 9.0.

Client module dependencies were originally intended to allow builds to override incorrect or missing component metadata of external dependencies by defining the metadata locally. This functionality has since been replaced by Component Metadata Rules.

Consider the following client module dependency example:

This can be replaced with the following component metadata rule:

Starting in Gradle 9.0, the earliest supported Develocity plugin version is 3.13.1. The plugin versions from 3.0 up to 3.13 will be ignored when applied.

Upgrade to version 3.13.1 or later of the Develocity plugin. You can find the latest available version on the Gradle Plugin Portal. More information on the compatibility can be found here.

The embedded Kotlin has been updated to Kotlin 1.8.20. For more information, see What’s new in Kotlin 1.8.20.

Note that there is a known issue with Kotlin compilation avoidance that can cause OutOfMemory exceptions in compileKotlin tasks if the compilation classpath contains very large JAR files. This applies to builds applying the Kotlin plugin v1.8.20 or the kotlin-dsl plugin.

You can work around it by disabling Kotlin compilation avoidance in your gradle.properties file:

See KT-57757 for more information.

Groovy has been updated to Groovy 3.0.17.

Since the previous version was 3.0.15, the 3.0.16 changes are also included.

Ant has been updated to Ant 1.10.13.

Since the previous version was 1.10.11, the 1.10.12 changes are also included.

The default version of CodeNarc has been updated to CodeNarc 3.2.0.

PMD has been updated to PMD 6.55.0.

Since the previous version was 6.48.0, all changes since then are included.

JaCoCo has been updated to 0.8.9.

A plugin compiled with Gradle >= 8.2 that makes use of the Kotlin DSL functions Project.the<T>(), Project.the(KClass) or Project.configure<T> {} cannot run on Gradle ⇐ 6.1.

When performing dependency resolution, Gradle creates an internal representation of the available Configurations. This requires inspecting all configurations and artifacts. Processing artifacts created by tasks causes those tasks to be realized and configured.

This internal representation is now created more lazily, which can change the order in which tasks are configured. Some tasks may never be configured.

This change may cause code paths that relied on a particular order to no longer function, such as conditionally adding attributes to a configuration based on the presence of certain attributes.

This impacted the bnd plugin and JUnit5 build.

We recommend not modifying domain objects (configurations, source sets, tasks, etc) from configuration blocks for other domain objects that may not be configured.

For example, avoid doing something like this:

The following methods on CompileOptions are deprecated:

Current usages of these methods should migrate to DirectoryProperty getGeneratedSourceOutputDirectory()

Gradle will now warn at runtime when methods of Configuration are called inconsistently with the configuration’s intended usage.

This change is part of a larger ongoing effort to make the intended behavior of configurations more consistent and predictable and to unlock further speed and memory improvements.

Currently, the following methods should only be called with these listed allowed usages:

Intended usage is noted in the Configuration interface’s Javadoc. This list is likely to grow in future releases.

Starting in Gradle 9.0, using a configuration inconsistently with its intended usage will be prohibited.

Also note that although it is not currently restricted, the getDependencies() method is only intended for use with DECLARABLE configurations. The getAllDependencies() method, which retrieves all declared dependencies on a configuration and any superconfigurations, will not be restricted to any particular usage.

The concept of conventions is outdated and superseded by extensions to provide custom DSLs.

To reflect this in the Gradle API, the following elements are deprecated:

Gradle Core plugins still register their conventions in addition to their extensions for backwards compatibility.

It is deprecated to access any of these conventions and their properties. Doing so will now emit a deprecation warning. This will become an error in Gradle 9.0. You should prefer accessing the extensions and their properties instead.

For specific examples, see the next sections.

Prominent community plugins already migrated to using extensions to provide custom DSLs. Some of them still register conventions for backward compatibility. Registering conventions does not emit a deprecation warning yet to provide a migration window. Future Gradle versions will do.

Also note that Plugins compiled with Gradle ⇐ 8.1 that make use of the Kotlin DSL functions Project.the<T>(), Project.the(KClass) or Project.configure<T> {} will emit a deprecation warning when run on Gradle >= 8.2. To fix this these plugins should be recompiled with Gradle >= 8.2 or changed to access extensions directly using extensions.getByType<T>() instead.

The convention properties contributed by the base plugin have been deprecated and scheduled for removal in Gradle 9.0. For more context, see the section about plugin convention deprecation.

The conventions are replaced by the base { } configuration block backed by BasePluginExtension. The old convention object defines the distsDirName, libsDirName, and archivesBaseName properties with simple getter and setter methods. Those methods are available in the extension only to maintain backward compatibility. Build scripts should solely use the properties of type Property:

The convention properties the application plugin contributed have been deprecated and scheduled for removal in Gradle 9.0. For more context, see the section about plugin convention deprecation.

The following code will now emit deprecation warnings:

This should be changed to use the application { } configuration block, backed by JavaApplication, instead:

The convention properties the java plugin contributed have been deprecated and scheduled for removal in Gradle 9.0. For more context, see the section about plugin convention deprecation.

The following code will now emit deprecation warnings:

This should be changed to use the java { } configuration block, backed by JavaPluginExtension, instead:

The convention properties contributed by the war plugin have been deprecated and scheduled for removal in Gradle 9.0. For more context, see the section about plugin convention deprecation.

The following code will now emit deprecation warnings:

Clients should configure the war task directly. Also, tasks.withType(War.class).configureEach(…​) can be used to configure each task of type War.

The convention properties contributed by the ear plugin have been deprecated and scheduled for removal in Gradle 9.0. For more context, see the section about plugin convention deprecation.

The following code will now emit deprecation warnings:

Clients should configure the ear task directly. Also, tasks.withType(Ear.class).configureEach(…​) can be used to configure each task of type Ear.

The convention properties contributed by the project-reports plugin have been deprecated and scheduled for removal in Gradle 9.0. For more context, see the section about plugin convention deprecation.

The following code will now emit deprecation warnings:

Configure your report task instead:

The following method on Configuration is deprecated for removal:

Obtain the set of all configurations from the project’s configurations container instead.

In some cases, Gradle will load JVM test framework dependencies from the Gradle distribution to execute tests. This existing behavior can lead to test framework dependency version conflicts on the test classpath. To avoid these conflicts, this behavior is deprecated and will be removed in Gradle 9.0. Tests using TestNG are unaffected.

To prepare for this change in behavior, either declare the required dependencies explicitly or migrate to Test Suites, where these dependencies are managed automatically.

The following methods on BuildIdentifier are deprecated:

You could use these methods to distinguish between different project components with the same name but from different builds. However, for certain composite build setups, these methods do not provide enough information to guarantee uniqueness.

Current usages of these methods should migrate to BuildIdentifier.getBuildPath().

Similarly, the method ProjectComponentSelector.getBuildName() is deprecated. Use ProjectComponentSelector.getBuildPath() instead.

Compilation warnings from Kotlin DSL scripts are printed to the console output. For example, the use of deprecated APIs in Kotlin DSL will emit warnings each time the script is compiled.

This is a potentially breaking change if you are consuming the console output of Gradle builds.

If you are configuring custom Kotlin compiler options on a project with the kotlin-dsl plugin applied you might encounter a breaking change.

In previous Gradle versions, the kotlin-dsl plugin was adding required compiler arguments on afterEvaluate {}. Now that the Kotlin Gradle Plugin provides lazy configuration properties, our kotlin-dsl plugin switched to adding required compiler arguments to the lazy properties directly. As a consequence, if you were setting freeCompilerArgs the kotlin-dsl plugin is now failing the build because its required compiler arguments are overridden by your configuration.

With the configuration above you would get the following build failure:

You must change this to adding your custom compiler arguments to the lazy configuration properties of the Kotlin Gradle Plugin for them to be appended to the ones required by the kotlin-dsl plugin:

If you were already adding to freeCompilerArgs instead of setting its value, you should not experience a build failure.

When a new property or method is added to an existing type in the Gradle DSL, it may clash with names already used in user code.

When a name clash occurs, one solution is to rename the element in user code.

This is a non-exhaustive list of API additions in 8.1 that may cause name collisions with existing user code.

Since Gradle 7.5, using Project.exec, Project.javaexec, and standard Java and Groovy APIs to run external processes at configuration time has been considered an error only if the feature preview STABLE_CONFIGURATION_CACHE was enabled. With the configuration cache promotion to a stable feature in Gradle 8.1, this error is detected regardless of the feature preview status. The configuration cache chapter has more details to help with the migration to the new provider-based APIs to execute external processes at configuration time.

Builds that do not use the configuration cache, or only start external processes at execution time are not affected by this change.

The allowed usage of a configuration should be immutable after creation. Mutating the allowed usage on a configuration created by a Gradle core plugin is deprecated. This includes calling any of the following Configuration methods:

These methods now emit deprecation warnings on these configurations, except for certain special cases which make allowances for the existing behavior of popular plugins. This rule does not yet apply to detached configurations or configurations created in buildscripts and third-party plugins. Calling setCanBeConsumed(false) on apiElements or runtimeElements is not yet deprecated in order to avoid warnings that would be otherwise emitted when using select popular third-party plugins.

This change is part of a larger ongoing effort to make the intended behavior of configurations more consistent and predictable, and to unlock further speed and memory improvements in this area of Gradle.

The ability to change the allowed usage of a configuration after creation will be removed in Gradle 9.0.

Configuration names "detachedConfiguration" and "detachedConfigurationX" (where X is any integer) are reserved for internal use when creating detached configurations.

The ability to create non-detached configurations with these names will be removed in Gradle 9.0.

Starting in Gradle 8.1, calling any of the following methods on JavaPluginExtension without the presence of the default java component is deprecated:

This java component is added by the JavaPlugin, which is applied by any of the Gradle JVM plugins including:

Starting in Gradle 9.0, calling any of the above listed methods without the presence of the default java component will become an error.

Starting in Gradle 8.1, calling WarPlugin#configureConfiguration(ConfigurationContainer) is deprecated. This method was intended for internal use and was never intended to be used as part of the public interface.

Starting in Gradle 9.0, this method will be removed without replacement.

By default, when applying the java plugin, the testClassesDirs`and `classpath of all Test tasks have the same convention. Unless otherwise changed, the default behavior is to execute the tests from the default test TestSuite by configuring the task with the classpath and testClassesDirs from the test suite. This behavior will be removed in Gradle 9.0.

While this existing default behavior is correct for the use case of executing the default unit test suite under a different environment, it does not support the use case of executing an entirely separate set of tests.

If you wish to continue including these tests, use the following code to avoid the deprecation warning in 8.1 and prepare for the behavior change in 9.0. Alternatively, consider migrating to test suites.

Altering the GMM (e.g., changing a component configuration variants) after a Maven or Ivy publication has been populated from their components is now deprecated. This feature will be removed in Gradle 9.0.

Eager population of the publication can happen if the following methods are called:

Previously, the following code did not generate warnings, but it created inconsistencies between published artifacts:

In this example, the Maven and Ivy publications will contain the main JAR artifacts for the project, whereas the GMM module file will omit them.

Running JVM tests on JVM versions older than 8 is deprecated. Testing on these versions will become an error in Gradle 9.0

Applying Kotlin DSL precompiled scripts published with Gradle < 6.0 is deprecated. Please use a version of the plugin published with Gradle >= 6.0.

Applying the kotlin-dsl together with Kotlin Gradle Plugin < 1.8.0 is deprecated. Please let Gradle control the version of kotlin-dsl by removing any explicit kotlin-dsl version constraints from your build logic. This will let the kotlin-dsl plugin decide which version of the Kotlin Gradle Plugin to use. If you explicitly declare which version of the Kotlin Gradle Plugin to use for your build logic, update it to >= 1.8.0.

Accessing libraries or bundles from dependency version catalogs in the plugins {} block of a Kotlin script is deprecated. Please only use versions or plugins from dependency version catalogs in the plugins {} block.

Using a task of type ValidatePlugins without applying the Java Toolchains plugin is deprecated, and will become an error in Gradle 9.0.

To avoid this warning, please apply the plugin to your project:

The Java Toolchains plugin is applied automatically by the Java library plugin or other JVM plugins. So you can apply any of them to your project and it will fix the warning.

These members will be removed in Gradle 9.0.

The enum constant JvmVendorSpec.IBM_SEMERU is now deprecated and will be removed in Gradle 9.0.

Please replace it by its equivalent JvmVendorSpec.IBM to avoid warnings and potential errors in the next major version release.

Following the related previous deprecation of the behaviour in Gradle 7.1, it is now also deprecated to use related StartParameter and GradleBuild properties. These properties will be removed in Gradle 9.0.

Setting custom build file using buildFile property in GradleBuild task has been deprecated.

Please use the dir property instead to specify the root of the nested build. Alternatively, consider using one of the recommended alternatives for GradleBuild task.

Setting custom build layout using StartParameter methods setBuildFile(File) and setSettingsFile(File) as well as the counterpart getters getBuildFile() and getSettingsFile() have been deprecated.

Please use standard locations for settings and build files:

The org.gradle.cache.cleanup property in gradle.properties under Gradle User Home has been deprecated. Please use the cache cleanup DSL instead to disable or modify the cleanup configuration.

Since the org.gradle.cache.cleanup property may still be needed for older versions of Gradle, this property may still be present and no deprecation warnings will be printed as long as it is also configured via the DSL. The DSL value will always take preference over the org.gradle.cache.cleanup property. If the desired configuration is to disable cleanup for older versions of Gradle (using org.gradle.cache.cleanup), but to enable cleanup with the default values for Gradle versions at or above Gradle 8, then cleanup should be configured to use Cleanup.DEFAULT:

Using relative file paths to point to Java executables is now deprecated and will become an error in Gradle 9. This is done to reduce confusion about what such relative paths should resolve against.

Calling Task.getConvention(), Task.getExtensions() from a task action at execution time is now deprecated and will be made an error in Gradle 9.0.

See the configuration cache chapter for details on how to migrate these usages to APIs that are supported by the configuration cache.

Running the Test task successfully when no test was executed is now deprecated and will become an error in Gradle 9. Note that it is not an error when no test sources are present, in this case the test task is simply skipped. It is only an error when test sources are present, but no test was selected for execution. This is changed to avoid accidental successful test runs due to erroneous configuration.

Version catalog accessors for plugin aliases in the plugins {} block aren’t shown as errors in IntelliJ IDEA and Android Studio Kotlin script editor anymore.

If you were using the @Suppress("DSL_SCOPE_VIOLATION") annotation as a workaround, you can now remove it.

If you were using the Gradle Libs Error Suppressor IntelliJ IDEA plugin, you can now uninstall it.

After upgrading Gradle to 8.1 you will need to clear the IDE caches and restart.

Also see the deprecated usages of version catalogs in the Kotlin DSL plugins {} block above.

Gradle’s enhanced objects, including projects, tasks, and source sets, can hold user-defined properties.