[en] The necessity of studying the variations in radiation levels from the balance viewpoint is discussed. Some human activities may increase, while others may decrease, radiation dose to population. In 1988, China's investigation showed that travel by air caused a raise of population collective dose by 3.6 x 10¹ man·Sv, while travel by ship, train and vehicle lead to a drop of 5.36 x 10² man·Sv, and that dwellings of coal cinder brick decreased collective dose by 3.5 x 10³ man·Sv, while buildings of reinforced concrete structure increased collective dose by 3.7 x 10³ man·Sv. It is inadequate to only study those activities which may increase radiation levels

[en] It is shown that the method for testing power cables for the absence of ignition presented in Circular Ts-02-98 does not allow for the effect of thermal decline of the current, which leads to overestimation of the cross section of the chosen cables, especially in 0.4-kV networks. It is recommended to equip house cable networks of power objects with long-range backup protections

[en] Mobility has now a crucial requirement for wireless communication. Handover is one of the major tasks that are used to support continuous transmission for a mobile terminal into different radio coverage area. Optimizing the existing handover protocol requires integrating new functionalities. This work focuses on presenting and optimizing handover algorithm. We analyze handover time in wireless local area networks based on the IEEE 802.11b MAC protocol. In fact, scan phase is the main contributor to the handover time. Then, we propose a handover model which replaces a scan phase by a positioning process. This model is able to select the suitable access point (AP) based on the shortest distance far from the mobile terminal (MT). Proposed Handover allows a mobile user to reacting quickly to decide about to which access point to connect. Simulation results show that the proposed model provides gains in term of delays and Handover success in various scenarios.

[en] In this paper, we address the issue of conducting a sensitivity analysis of complex models with both static and dynamic uncertain inputs. While several approaches have been proposed to compute the sensitivity indices of the static inputs (i.e. parameters), the one of the dynamic inputs (i.e. stochastic fields) have been rarely addressed. For this purpose, we first treat each dynamic as a Gaussian process. Then, the truncated Karhunen–Loève expansion of each dynamic input is performed. Such an expansion allows to generate independent Gaussian processes from a finite number of independent random variables. Given that a dynamic input is represented by a finite number of random variables, its variance-based sensitivity index is defined by the sensitivity index of this group of variables. Besides, an efficient sampling-based strategy is described to estimate the first-order indices of all the input factors by only using two input samples. The approach is applied to a building energy model, in order to assess the impact of the uncertainties of the material properties (static inputs) and the weather data (dynamic inputs) on the energy performance of a real low energy consumption house. - Highlights: • Sensitivity analysis of models with uncertain static and dynamic inputs is performed. • Karhunen–Loève (KL) decomposition of the spatio/temporal inputs is performed. • The influence of the dynamic inputs is studied through the modes of the KL expansion. • The proposed approach is applied to a building energy model. • Impact of weather data and material properties on performance of real house is given

No abstract available

[en] The purpose of this paper is to explain how the regulatory environment created by planning and building regulations interacts with land and property markets. Since this regulatory environment operates as a form of intervention within property markets in general and the development process in particular, it is essential first to understand the nature, structure and operation of land and property markets. These are covered in the first section. The second section identifies the aims and components of the planning system and building regulations. From this basis, four broad types of policy intervention are reviewed in the third section. These cover policies that seek to shape, regulate or stimulate market activity, and those that aim to build state or market capacity to produce desired outcomes. The final section uses the private residential development process as a case study to explore the extent to which state intervention can influence producer-consumer relationships in one important market sector. The paper argues that effective intervention in land and property markets requires the creation of a broad range of policy tools and their appropriate deployment to suit particular market circumstances. (author)

[en] Several epidemiological studies have based their estimates of magnetic field exposure on the proximity to power lines. This has been done in three principally different ways, which differ in the amount of information that is used. These are: (1) distance; (2) distance and configuration (wire code); and (3) distance, configuration, and load (calculated field). It is presumed that the more information that is used, the more accurate is the exposure estimate. All these three approaches suffer from the limitation that they only account for exposure that is generated by power lines. The influence on the in-home magnetic field from sources other than the power line are not considered, nor is exposure experienced at places other than the home. This raises the following question. What is the implication for the result of the epidemiological study of the exposure misclassification that is introduced by basing magnetic field exposure estimation on power lines near homes? Although the necessary information is only partly at hand the answers to this question will be discussed. The basis will be some general epidemiological principles combined with data from a Swedish study on residential exposure and cancer risk. (author)

[en] Recent epidemiological research work suggesting a link between 50-60 Hz magnetic fields and certain forms of leukemia and brain cancer, has dramatically increased interest in evaluating electromagnetic fields emanating from a three-dimensional arbitrary network of energized overhead and buried conductors. This article presents electric and magnetic fields inside and outside an imaginary house located near a power distribution line. The electromagnetic fields are computed using a powerful frequency domain method described in a companion publication. Since the main objective of this work is to illustrate the usefulness and capabilities of the analytical method used for the computations, the emphasis here is on modelling complex portions of residential electric circuits, buried water pipes and ground rods, without necessarily duplicating an existing house or experimental equivalent. This approach was adopted deliberately. Future work will focus on modelling existing sites for which a complete set of experimental data is available

[en] Promoting energy efficiency in the building sector is essential if the agreements of the Kyoto Protocol are to be honoured. Different initiatives for energy labelling of highly energy-efficient residential buildings have emerged throughout Europe as an essential method to stimulate market demand, to control grants or to ensure the quality of demonstration projects with excellent energy performance. The paper identifies the barriers and opportunities for the further diffusion of labels for highly energy-efficient houses. A model based on the theory of the diffusion of innovation is developed to analyse perceived attributes of existing European labels. The paper investigates the innovation characteristics of existing labels in Europe, with a focus on advanced countries. The question of compatibility with the development of the European Energy Performance of Buildings Directive (EPBD) is examined in detail. We found that the diffusion of emerging and already existing voluntary European labels for highly energy-efficient houses is needed. Their complexity can be lowered and relative advantage, trialability, observability, and compatibility can be increased. EPBD calculation procedures should be able to receive highly energy-efficient houses. In the framework of the recast of the EPBD, official recognition of existing voluntary labels is recommended. (author)

[en] The purpose of this paper is to explain how the regulatory environment created by planning and building regulations interacts with land and property markets. Since this regulatory environment operates as a form of intervention within property markets in general and the development process in particular, it is essential first to understand the nature, structure and operation of land and property markets. These are covered in the first section. The second section identifies the aims and components of the planning system and building regulations. From this basis, four broad types of policy intervention are reviewed in the third section. These cover policies that seek to shape, regulate or stimulate market activity, and those that aim to build state or market capacity to produce desired outcomes. The final section uses the private residential development process as a case study to explore the extent to which state intervention can influence producer-consumer relationships in one important market sector. The paper argues that effective intervention in land and property markets requires the creation of a broad range of policy tools and their appropriate deployment to suit particular market circumstances