[en] In the present work, hematite iron oxide nano-particles are synthesized through a facile wet chemical precipitation route. The phase formation behavior and microstructure evolution of the synthesized nano-particles are studied using infrared spectroscopy in conjunction with x-ray diffraction analyses and electron microscopy. Chemi-resistive type hydrogen sensing characteristics (e.g. response %, response time, recovery time) of hematite iron oxide nano-particulate sensing element are evaluated using an automated, dynamic flow gas sensing measurement set-up. The sensing characteristics are measured by varying the operating temperature (275–350 °C) of the sensor and concentration of hydrogen (250–1660 ppm). From the operating temperature dependence of response and recovery times, we have estimated the respective activation energies for response and recovery processes. (paper)

[en] A great quantity of industries are responsible for contaminating the environment with the heavy metals which are containing in their wastewaters. The recovery of these metals is both from an environmental and economical points of view of the upmost interest. A study is made of the use of mill scale-originating in the hot rolling of steel-as an adsorbent for the removal of heavy metals from liquid effluents. The adsorption of Zn''2⁺, Cd''2⁺ y Pb''2⁺ on the rolling mill scale was investigated by determination of adsorption isotherms. The effect of time, equilibrium temperature and concentration of metal solution on mill scale adsorption efficiency was evaluated. The adsorption process was analysed using the theories of Langmuir and Freundlich. Desorption process of metals from loaded mill scales was also studied using several doser bent at different experimental conditions. It has been proved that the mill scale is an effective adsorbent for the cations studies in aqueous solutions within the range of the working concentrations. (Author) 32 refs

[en] Management and recovery of waste are activities with multiple impacts: technologically (by using waste on current production flows, thus replacing poor raw materials), economically (can substantially reduce manufacturing costs by recycling waste), social (by creating new jobs where it is necessary to process the waste in a form more suited to technological flows) and ecologically (by removing waste that is currently produced or already stored - but poses a threat to the health of the population and / or to the environment). This is also the case for medical waste, for example radiographs, which are currently produced in large quantities, for which replacement solutions are sought, but are currently stored by archiving in hospital units. The paper presents two methods used for this kind of waste management, the result being the recovery of silver, material with applications and with increasing price, but also the proper disposal of the polymeric support. This analysis aims at developing a more efficient recycling technology for medical radiographs. (paper)

[en] Characterization and beneficiation studies have been carried out on Brahmagiri placer deposits of Puri, Dist., Odisha. The studies show that this deposit contains potential amount of heavy minerals. The dune sands contain higher heavy minerals than that of beach sand. One of the dune sand samples collected from this deposit shows heavy mineral content of about 29 % also. A composite sand sample is prepared and heavy mineral recovery is studied from this by using gravity table. During recovery of heavy minerals both fresh and sea water are used to see their effect on grade and recovery of concentrate. Sea water rougher gravity table data shows better results than fresh water rougher gravity table. The gravity table study of composite sample shows a yield of 14.8% with a grade of 91.2 % and 93.2 % recovery. (paper)

[en] In this paper we are concerned with the contact process with random recovery rates and edge weights on the complete graph with n vertices. We show that the model has a critical value which is inversely proportional to the product of the mean of the edge weight and the mean of the inverse of the recovery rate. In the subcritical case, the process dies out before an amount of time with order $O(\log <!--\; ???\; -->n)$ with high probability as $n\to <!--\; ???\; -->+\mathrm{\infty <!--\; ???\; -->}$. In the supercritical case, the process survives for an amount of time with order $\exp <!--\; ???\; -->\{O(n)\}$ with high probability as $n\to <!--\; ???\; -->+\mathrm{\infty <!--\; ???\; -->}$.

[en] Topics covered in this Nuclear Technology and Research Development (NTRD) monthly update include: Advanced Fuels Campaign, Material Recovery and Waste Forms Development, MPACT Campaign, Fuel Cycle Options Campaign, Joint Fuel Cycle Study Activities, and AFCI-HQ Program Support.

[en] Background and purpose: Osteitis pubis (OP), a common pathology in elite athletes, is an aseptic inflammatory process of the pubic symphysis bone, and may involve surrounding soft tissues, tendons and muscles. OP is typically characterized by (often recurring) groin pain and is an important cause of time-off from sports activity in athletes. Aim of this retrospective study was to analyze magnetic resonance imaging (MRI) findings in professional football players with clinical diagnosis of OP and to correlate MRI findings with clinical outcome. Material and methods: All professional football players (23 males, 1 female; mean age: 21 ± 3.7 years; range: 16–30 years) with groin pain and clinical diagnosis of OP, who underwent pelvic MRI in our institution were retrospectively analyzed. The MR images were analyzed regarding the presence of bone marrow edema and its extension, whether fluid in the symphysis pubis or periarticular soft tissue edema with a rim-like periosteal distribution or edema in the muscles located around the symphyseal joint were present, whether degenerative changes of the symphysis pubis and of signs of symphyseal instability were encountered. A quantitative measurement of the signal intensity in bone marrow edema on 3 T STIR sequences was performed, normalizing these values to the mean signal intensity values in the ipsilateral iliopsoas muscle. All patients were classified according to a 3-point grading scale. For each patient, both the symptoms 18 months after the initial MRI examination, the duration of time off from playing football and the kind of treatment applied were evaluated. Results: Among all professional athletes, in 20/24 (83.3%) MRI showed signs of OP with bone marrow edema at the pubic bone. 12 of these patients showed complete clinical recovery without any symptoms after 18 months, while in 8 patients partial recovery with persistence of groin pain during higher sports activity was observed. Patients with edema in periarticular soft tissues or in the muscles around the symphyseal joint on MRI at the beginning of symptoms presented significantly more often with a partial recovery after returning to high sports activity (p = 0.042 and p = 0.036, respectively). A partial recovery was also significantly associated with higher normalized mean signal intensity values in bone marrow edema on STIR sequences at the beginning of symptoms (mean = 4.77 ± 1.63 in the group with partial recovery vs. mean = 2.86 ± 0.45 in the group with complete recovery; p = 0.0019). No significant association was noticed between MRI findings and time of abstinence from high sports activity, as well as between the 3-point grading scale and the time off from high sport activity and recovery at 18 months. Conclusions: Edema in periarticular soft tissues, edema with extension to the muscles located around the symphyseal joint, as well as higher normalized signal intensity values in bone marrow edema on STIR sequences in the pubic bones at the beginning of groin pain are the most reliable MRI findings of a poor clinical long-term outcome of OP in professional football players and should be regarded as negative prognostic factors.

[en] This article discusses uranium recovery from phosphoric acid, proven to be a viable technology by several U.S. producers since 1978. This technology has accounted for 12.8% of U.S. uranium production during this time: a total of almost 40 Mlb equivalent U3O8. Of the several producers, only the Uncle Sam plant of IMC-Agrico has operated continuously during the period, and that plant is the longest-lived uranium production facility operating in the United States. The basis for the process is reviewed, including geological aspects, mining and recovery of phosphorite, phosphoric acid production, and uranium recovery. Licensing of such facilities is also discussed

[en] An evidence-based methodology was adopted in this research to establish strategies to increase lead recovery and recycling via a systematic review and critical appraisal of the published literature. In particular, the research examines pollution prevention and waste minimization practices and technologies that meet the following criteria: (a) reduce/recover/recycle the largest quantities of lead currently being disposed of as waste, (b) technically and economically viable, that is, ready to be diffused and easily transferable, and (c) strong industry interest (i.e., industry would consider implementing projects with higher payback periods). The following specific aims are designed to achieve the study objectives: Aim 1 - To describe the recycling process of recovering refined lead from scrap; Aim 2 - To document pollution prevention and waste management technologies and practices adopted by US stakeholders along the trajectory of LAB and lead product life cycle; Aim 3 - To explore improved practices and technologies which are employed by other organizations with an emphasis on the aforementioned criteria; Aim 4 - To demonstrate the economic and environmental costs and benefits of applying improved technologies and practices to existing US smelting operations; and Aim 5 - To evaluate improved environmental technologies and practices using an algorithm that integrates quantitative and qualitative criteria. The process of identifying relevant articles and reports was documented. The description of evidence was presented for current practices and technologies used by US smelters as well as improved practices and technologies. Options for integrated environmental solutions for secondary smelters were introduced and rank ordered on the basis of costs (i.e., capital investment) and benefits (i.e., production increases, energy and flux savings, and reduction of SO2 and slag). An example was provided to demonstrate the utility of the algorithm by detailing the costs and benefits associated with different combinations of practices and technologies. The evidence-based methodology documented in this research reveals that it is technically and economically feasible to implement integrated environmental solutions to increase lead recovery and recycling among US smelters. The working example presented in this research can be confirmed with US stakeholders and form the basis for implementable solutions in the lead smelter and product industries to help reverse the overall trend of declining life-cycle recycling rates.

[en] Recycled aggregate is an environmentally self-sustainable solution that can reduce construction waste and replace natural aggregates. However, there is a disadvantage in concrete such as initial strength drop and long-term strength development. Therefore, the interaction effect of the two materials can be expected by filling the cyclic aggregate concrete in the CFT column. In order to develop a concrete with compressive strength of 50 MPa as a recycled aggregate, we carried out a mixing experiment and fabricated 18 specimens to confirm the compressive behavior of a RCFT (Recycled Concrete Filled Tube) column that can be applied to actual buildings. Variable is the shape and thickness of steel pipe, concrete strength and mixing ratio, and coarse aggregate and fine aggregate are all used as recycled aggregate. The optimum mixing ratio for recycled aggregate concrete to be filled in the CFT filled steel pipe was found through three concrete preliminary mixing experiments. In addition, the compression test of the RCFT column was carried out to observe and analyze the buckling shape of the CFT column. Based on the analysis of the buckling configuration and the experimental data, the load-displacement curves of the specimens were drawn and the compressive behavior was analyzed. (Author)