Park, S.W.; Shim, J.Y.; Baik, H.K.
Ninth international conference on ion beam modification of materials. Book of abstracts1995
Ninth international conference on ion beam modification of materials. Book of abstracts1995
AbstractAbstract
[en] Short communication
Primary Subject
Secondary Subject
Source
Australian National Univ., Canberra, ACT (Australia). Research School of Physical Sciences; 452 p; 1995; p. 4079; Accademic Press; IBMM'95: 9. international conference on ion beam modification of materials; Canberra (Australia); 5-10 Feb 1995
Record Type
Miscellaneous
Literature Type
Conference
Report Number
Country of publication
Reference NumberReference Number
Related RecordRelated Record
INIS VolumeINIS Volume
INIS IssueINIS Issue
Choe, Y.S.; Lee, I.S.; Baik, H.K.
Ninth international conference on ion beam modification of materials. Book of abstracts1995
Ninth international conference on ion beam modification of materials. Book of abstracts1995
AbstractAbstract
[en] Short communication
Primary Subject
Secondary Subject
Source
Australian National Univ., Canberra, ACT (Australia). Research School of Physical Sciences; 452 p; 1995; p. 4049; Accademic Press; IBMM'95: 9. international conference on ion beam modification of materials; Canberra (Australia); 5-10 Feb 1995
Record Type
Miscellaneous
Literature Type
Conference
Report Number
Country of publication
Reference NumberReference Number
Related RecordRelated Record
INIS VolumeINIS Volume
INIS IssueINIS Issue
AbstractAbstract
[en] Creep stress changes the morphology and distribution of the precipitates in the precipitation-hardened alloys. It leads to the formation of precipitate free zones (PFZs) near the grain boundaries. From the microstructural observation of the creep tested specimens of a Ni-Cr-W-Al-Ti superalloy, the relation between PFZs and the amount of plastic deformation in the creep-ruptured specimen is established and the validity of the existing model is discussed based upon the experimental results
Primary Subject
Secondary Subject
Record Type
Journal Article
Journal
Scripta Materialia; ISSN 1359-6462; ; v. 34(4); p. 537-542
Country of publication
Reference NumberReference Number
INIS VolumeINIS Volume
INIS IssueINIS Issue
AbstractAbstract
[en] FeSiBNb amorphous powder cores were prepared with the amorphous powder by gas atomization and subsequent hot pressing of resulting powder after creating oxide layers on the amorphous powder. Fully amorphous FeSiBNb powders with good soft magnetic properties were successfully obtained in the particle size range below 100 μm. FeSiBNb amorphous powder cores exhibit stable permeability up to 10 MHz, showing excellent high-frequency characteristics
Primary Subject
Source
International symposium on spintronics and advanced magnetic technologies; Taipei, Taiwan (China); 24-27 Aug 2005; International symposium on magnetic materials and applications 2005; Taipei, Taiwan (China); 24-27 Aug 2005; S0304-8853(06)00272-1; Copyright (c) 2006 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.; Country of input: International Atomic Energy Agency (IAEA)
Record Type
Journal Article
Literature Type
Conference
Journal
Journal of Magnetism and Magnetic Materials; ISSN 0304-8853; ; CODEN JMMMDC; v. 304(1); p. e182-e185
Country of publication
Reference NumberReference Number
INIS VolumeINIS Volume
INIS IssueINIS Issue
External URLExternal URL