[en] Radiation processing of municipal sewage and sludge has been considered not only for disinfection but also for solids and organic matter removal in Brazil. The improvement of irradiated systems were demonstrated by the elimination of indicator bacteria and by the reduction on the total bacteria count, on the chemical and biochemical oxygen demand from raw sewage and biologically treated effluents. The selected doses of radiation to be applied to sewage and sewage sludge are in the range of 3.0 to 4.0 kGy to sewage and 4.0 to 6.0 kGy to sewage sludge

[en] Surfactants, as detergent active substances, are an important source of pollution causing biological adverse effects to aquatic organisms. Several data have been showing ecological disturbance due to the high concentration of surfactants on receiving waters and on wastewater treatment plants. Ionizing radiation has been proved as an effective technology to decompose organic substances and few papers have included ecotoxicological aspects. This paper shows the reduction of acute toxicity of a specific surfactant, sodium dodecyl sulfate (SDS), when diluted in distilled water and submitted to electron beam radiation. The study included two test-organisms, the marine bacteria Vibrio fischeri and the crustacean Daphnia similis. Radiation processing resulted in an important acute toxicity removal for both assays, which can be summarized between 70% and 96%, using 3.0, 6.0, 9.0 and 12.0 kGy as radiation doses. Nevertheless, lower doses demonstrated better effect than 9.0 and 12.0 kGy and the bacterium assay was more sensitive to SDS than crustacean assay

[en] Biological assays have been applied to industrial effluents and sewage influents, from distinct sites, before and after being submitted to ionizing radiation treatment. The objective of this study was to evaluate the efficiency of radiation, mainly electron beam accelerator, for the acute toxicity removal. The selected sampling presented a very toxic level and the radiation process was efficient for toxicity removal for 87.7% of irradiated samples. The sewage influents required lower radiation doses to reduce toxicity when compared to raw industrial effluents

[en] The textile sector stands out for its importance in the global economy and for the high consumption of water in its production processes, mainly in processing. This results from the need for a reaction in an aqueous medium between the fiber and the organic and inorganic inputs. The generated wastewater has high absorciometric rates, due to the hydrolyzed dyestuff present in the dyebath, and several inputs with high solubility and low degradability. Consequently, a colored effluent that is potentially toxic to aquatic biota is generated. The objective of this study was to evaluate the absorciometric index and the toxicity of the textile dyeing effluent, with the Reactive dyestuff Blue 21 (RB 21), before and after the treatment by electron beam irradiation (EBI). (author)

No abstract available

[en] Brazil started a research program using high-energy electrons from accelerators for treating drinking water and wastewater in 1991. The objective is to study the potential use of this technique for disinfection of domestic wastewater, chemical degradation of dyes, phenols, oils and greases in industrial wastewater and reduction of trihalomethanes (THM's) concentration in drinking water. An Electron Beam Accelerator, 1.5MeV - 25mA from Radiation Dynamics Inc., was used for all experiments. A pilot plant designed to treat up to 3m³/h was built. (author)

[en] The subject of this study is a Peruvian painting from the 17th century, which has been recently restored and then contaminated by mould. It received different unsuccessful treatments. Therefore, radiation process was suggested as an alternative once it is an effective technology for decontamination and conservation purposes. The aim of this study is to investigate the influence of irradiation process on the original painting and on the products used in the restoration process. These products were irradiated with ⁶⁰Co gamma rays applying doses in the range of 6-25 kGy. The polymeric materials were characterized by thermal analysis techniques before and after irradiation. The colour of the pigments irradiated and non-irradiated were compared by spectrophotometric analysis. Small samples removed of the original painting were also irradiated and investigated. The results obtained until now allowed concluding that the irradiation with the appropriated dose of 6.0 kGy, according to the literature, will not damage the restored painting

[en] Electron beam radiation has been applied to improve real industrial and domestic effluents received by Suzano wastewater treatment plant. Radiation efficacy has been evaluated as toxicity reduction, using two biological assays. Three sites were sampled and submitted for toxicity assays, anionic surfactant determination and electron beam irradiation. This paper shows the reduction of acute toxicity for both test-organisms, the marine bacteria Vibrio fischeri and the crustacean Daphnia similis. The raw toxic effluents exibitted from 0.6 ppm up to 11.67 ppm for anionic surfactant before being treated by the electron beam. Radiation processing resulted in reduction of the acute toxicity as well as surfactant removal. The final biological effluent was in general less toxic than other sites but the presence of anionic surfactants was evidenced

[en] Brazil started a research program using high-energy electrons from accelerators for treating drinking water and wastewater in 1991. The objective is to study the potential use of this technique for disinfection of domestic wastewater, chemical degradation of dyes, phenols, oils and greases in industrial wastewater and reduction of trihalomethanes (THM's) concentration in drinking water. An Electron Beam Accelerator, 1.5MeV -25mA from Radiation Dynamics Inc., was used for all experiments. A pilot plant designed to treat up to 3m³/h was built. (author)

[en] Due to the great environmental contamination it becomes necessary to improve wastewater treatment as well as to avoid chemical compounds addition. In this sense, this work considers an electron beam accelerator to disinfect domestic effluent and sludge. Irradiation doses between 2,0 kGy and 5,0 kGy for the first one, and 10,0kg and 15,0kGy for the last one have been chosen. (author). 3 refs, 1 fig, 3 tabs