[en] Purpose: To determine the long-term dose response of novel low-dose γ-emitting stents in a rabbit iliac artery model. Methods and Materials: Control stents (n=24) and ¹⁰³Pd stents 1.0 to 4.0 mCi (n=36) were implanted in the iliac arteries of 30 New Zealand rabbits. Stents were evaluated by intravascular ultrasound (immediately post procedure and before killing) and by histomorphometry. Results: At 26 weeks, 28 rabbits were killed, with no evidence of stent thrombosis. In the body of the stent there was a dose-response relationship with 50% inhibition of intimal hyperplasia at the highest activity compared to control stents (p=0.07) and a significant increase in intimal hyperplasia at the lowest activity (p<0.01). At the stent edges, there was a significant reduction of lumen area at all activity levels compared to control stents, which was most prominent at the proximal stent edge. Higher-activity stents demonstrated incomplete endothelialization and immature neointimal formation. Conclusions: Continuous low-dose-rate irradiation by γ-emitting ¹⁰³Pd stents is feasible with reduction of in-stent hyperplasia in a dose-related manner. However, significant narrowing at the stent edges, increased in-stent hyperplasia at lower activities, and incomplete vascular healing with persistence of immature neointima at higher activities are significant limitations

[en] The mechanical properties of additively manufactured metals tend to show high variability, due largely to the stochastic nature of defect formation during the printing process. This study seeks to understand how automated high throughput testing can be utilized to understand the variable nature of additively manufactured metals at different print conditions, and to allow for statistically meaningful analysis. This is demonstrated by analyzing how different processing parameters, including laser power, scan velocity, and scan pattern, influence the tensile behavior of additively manufactured stainless steel 316L utilizing a newly developed automated test methodology. Microstructural characterization through computed tomography and electron backscatter diffraction is used to understand some of the observed trends in mechanical behavior. Specifically, grain size and morphology are shown to depend on processing parameters and influence the observed mechanical behavior. In the current study, laser-powder bed fusion, also known as selective laser melting or direct metal laser sintering, is shown to produce 316L over a wide processing range without substantial detrimental effect on the tensile properties. Ultimate tensile strengths above 600 MPa, which are greater than that for typical wrought annealed 316L with similar grain sizes, and elongations to failure greater than 40% were observed. As a result, it is demonstrated that this process has little sensitivity to minor intentional or unintentional variations in laser velocity and power.

[en] The quality of metal objects fabricated via laser powder bed fusion are highly affected by process parameters, and their influence on final products is yet to be fully explored. In this work, pyrometry signals of the melt pool were collected from a set of stainless-steel samples during manufacturing and the effect of laser power on porosity and roughness of final printed parts was analyzed. Results show that the melt pool pyrometry signal of contours increases with higher laser power, whereas it is lower and decreases for the infilled part. Post-built X-ray computed tomography imaging reveals that porosity decreases while sample roughness increases upon increasing laser power. The decrease in porosity with increasing laser power is attributed to the larger size of the contour welds that were printed first, leading to an increase in dimension of the final products.

[en] We analyze the structure of Haliotis rufescens nacre, or mother-of-pearl, using synchrotron spectromicroscopy and x-ray absorption near-edge structure spectroscopy. We observe imaging contrast between adjacent individual nacre tablets, arising because different tablets have different crystal orientations with respect to the radiation's polarization vector. Comparing previous data and our new data with models for columnar nacre growth, we find the data are most consistent with a model in which nacre tablets are nucleated by randomly distributed sites in the organic matrix layers

[en] The Advanced Time-Delayed βγγ(t) method was used to measure lifetimes of selected high-spin states in ¹²²Cd populated from β^- decay of the J^π=(9^-) isomer in ¹²²Ag. From the γγ coincidences, a new energy level was established at 2616.6 keV with a suggested spin-parity assignment of 8^-. Lifetimes were determined for the high-spin states at 2616.6 and 2502.7 keV as T_1/2=1.35(29) ns and 0.24(6) ns, respectively. The transition rates for γ rays de-exciting the 7^- states in the N=74 isotones of ¹²²Cd, ¹²⁴Sn, and ¹²⁶Te were found to be very similar

[en] With the conclusion of the third observing run for Advanced LIGO/Virgo (O3), we present a detailed analysis of both triggered and serendipitous observations of 17 gravitational-wave (GW) events (7 triggered and 10 purely serendipitous) from the Searches After Gravitational-waves Using ARizona Observatories (SAGUARO) program. We searched a total of 4935 deg² down to a median 5σ transient detection depth of 21.1 AB mag using the Mt. Lemmon 1.5 m telescope, the discovery engine for SAGUARO. In addition to triggered events within 24 hr, our transient search encompassed a time interval following GW events of <120 hr, providing observations on ∼1/2 of the events accessible to the Mt. Lemmon 1.5 m telescope. We covered 2.1%–86% of the LVC total probability (P _total) for individual events, with a median P _total ≈ 8% within <120 hr. Following improvements to our pipeline and the addition of serendipitous observations, we find a total of seven new optical candidates across five GW events, which we are unable to rule out after searching for additional information and comparing to kilonova models. Using both publicly available and our own late-time data, we investigated a total of 252 optical candidates for these 17 events, finding that only 65% were followed up in some capacity by the community. Of the total 252 candidates, we are able to rule out an additional 12 previously reported counterpart candidates. In light of these results, we discuss lessons learned from the SAGUARO GW counterpart search. We discuss how community coordination of observations and candidate follow-up, as well as the role of archival data, are crucial to improving the efficiency of follow-up efforts and preventing unnecessary duplication of effort with limited electromagnetic resources.

[en] The Advanced-Time-Delayed method was used to measure lifetimes of the states in ⁴¹Ar populated in the β decay of ⁴¹Cl. The nuclei ⁴¹Cl were produced at ISOLDE by 1.4-GeV proton bombardment of a thick UC_x target and mass-separated as molecular ions, XeCl⁺. Our measured half-life of the 167.1-keV state, T_1/2=315(15) ps, is significantly lower than the previously measured value of 410(30) ps. We have also determined T_1/2=260(80) ps and T_1/2≤46 ps for the 515.9- and 1867.7-keV states, respectively. These are the shortest lifetimes measured so far with the ultrafast timing method using the new LaBr₃(Ce) crystals for γ-ray detection