[en] The authors report the radioprotection study required in the exploitation authorization file associated with the putting into service of the Zeiss Meditec Intrabeam system. After having evoked the characteristics of this equipment (power, dose rate, treatment duration) and some characteristics of the building, they report the results of the zoning and workstation study. Two situations have assessed: the operator is present in the operating theatre suite behind a leaded screens, or stands outside of the operating theatre suite. The received dose is assessed on a basis of 50 treatments a year. Dose rate levels comply with personnel radiation protection requirements. Short communication

[en] The objective of this study is to evaluate the feasibility as well as the tolerance of a treatment that associates extra pleural pneumonectomy and hemi thoracic irradiation for three patients reached by a thymoma of stage 4a. (N.C.)

[en] The patient positioning and repositioning control in radiation therapy all along the treatment can be conducted using a variety of X-ray sources and imaging detector devices. The development of image guided radiation therapy techniques leads to more frequent use of this imaging control. In this article we summarize the current methods for measuring the dose delivered by X-ray imaging devices used in radiation therapy, as well as basic proposals to take account of these imaging doses for prescribing, recording and reporting radiation therapy treatment. (authors)

[en] The impact of PET appears major during the balance of extension and the definition of radiotherapy treatment plans, that confirms the data of anterior series. The impact of PET on the local control rates and survival, as well as the toxicity is still to demonstrate in a randomized study. (N.C.)

[en] The goal of this study was to show the feasibility of step and shoot intensity-modulated radiation therapy pre-treatment quality control for patients using the electronic portal imaging device (iViewGT) fitted on a Sli+ linac (Elekta Oncology Systems, Crawley, UK) instead of radiographic films. Since the beginning of intensity-modulated radiation therapy treatments, the dosimetric quality control necessary before treating each new patient has been a time-consuming and therefore costly obligation. In order to fully develop this technique, it seems absolutely essential to reduce the cost of these controls, especially the linac time. Up to now, verification of the relative dosimetry field by field has been achieved by acquiring radiographic films in the isocenter plane and comparing them to the results of the XiO planning system (Computerized Medical Systems, Missouri, USA) using RIT113 v4.1 software (Radiological Imaging Technology, Colorado, USA). A qualitative and quantitative evaluation was realised for every field of every patient. A quick and simple procedure was put into place to be able to make the same verifications using portal images. This new technique is not a modification of the overall methodology of analysis. The results achieved by comparing the measurement with the electronic portal imaging device and the calculation with the treatment planning system were in line with those achieved with the films for all indicators we studied (isodoses, horizontal and vertical dose profiles and gamma index). (authors)

[en] The differences of daily positioning have been quantified and the precision of this king of contention has been evaluated. The buccal support improves the positioning precision. The daily use of the entrained image is feasible in routine and allows a measurable improvement of the treatment precision. (N.C.)

[en] Dose calculation in preclinical context with a clinical level of accuracy is a challenge due to the small animal scale and the medium photon energy range. In this work, we evaluate the effectiveness and accuracy of an analytical irradiator model combined with Monte Carlo (MC) calculations in the irradiated volume to calculate the dose delivered by a modern small animal irradiator.

A model of the XRAD225Cx was created in µ-RayStation 8B, a preclinical treatment planning system, allowing arc and static beams for seven cylindrical collimators. Calculations with the µ-RayStation MC dose engine were compared with EBT3 measurements in water for all static beams and with a validated GATE model in water, heterogeneous media and a mouse CT. The GATE model is a complete MC representation of the XRAD225Cx.

In water, µ-RayStation calculations, compared to GATE calculations and EBT3 measurements, agreed within a maximal error of 3.2% (mean absolute error of 0.6% and 0.8% respectively) and maximal distance-to-agreement (DTA) was 0.2 mm at 50% of the central dose. For a 5 mm static beam in heterogeneous media, the maximal absolute error between µ-RayStation and GATE calculations was below 1.3% in each medium and DTA was 0.1 mm at interfaces. For calculations on a mouse CT, µ-RayStation and GATE calculations agreed well for both static and arc beams. The 2D local gamma passing rate was  >98.9% for 1%/0.3 mm criteria and  >92.9% for 1%/0.2 mm criteria. Moreover, µ-RayStation reduces calculation time significantly comparing with GATE (speed-up factor between 120 and 680).

These findings show that the analytical irradiator model presented in this work combined with the µ-RayStation MC dose engine accurately computes dose for the XRAD225Cx irradiator. The improvements in calculation time and availability of functionality and tools for managing, planning and evaluating the irradiation makes this platform very useful for pre-clinical irradiation research. (paper)

[en] Purpose. - Systematic verifications of patient's specific intensity-modulated radiation treatments are usually performed with absolute and relative measurements. The results constitute a database which allows the identification of potential systematic errors. Material and methods. - We analyzed 1270 beams distributed in 232 treatment plans. Step-and-shoot intensity-modulated radiation treatments were performed with a Clinac (6 and 23 MV) and sliding window intensity-modulated radiation treatments with a Novalis (6 MV). Results. - The distributions obtained do not show systematic error and all the control meet specified tolerances. Conclusion. - These results allow us to reduce controls specific patients for treatments performed under identical conditions (location, optimization and segmentation parameters of treatment planning system, etc.). (authors)

[en] In dosimetric studies performed after therapeutic injection, it is essential to correct count losses due to deadtime on the gamma camera. This note describes four deadtime correction methods, one based on the use of a standard source without preliminary calibration, and three requiring specific calibration and based on the count rate observed in different spectrometric windows (20%, 20% plus a lower energy window and the full spectrum of 50-750 keV). Experiments were conducted on a phantom at increasingly higher count rates to check correction accuracy with the different methods. The error was less than +7% with a standard source, whereas count-rate-based methods gave more accurate results. On the assumption that the model was paralysable, preliminary calibration allowed an observed count rate curve to be plotted as a function of the real count rate. The use of the full spectrum led to a 3.0% underestimation for the highest activity imaged. As count losses depend on photon flux independent of energy, the use of the full spectrum during measurement allowed scatter conditions to be taken into account. A protocol was developed to apply this correction method to whole-body acquisitions. (author)

[en] The practice of in vivo dosimetry in the service begun in 2003, has been gradually generalized for all treatment plans. It is one of the elements of quality control of the treatment plan. A summary is presented here for the period of January 2006 to May 2007. (N.C.)