[en] Some results of investigations of electrodeless discharges in deuterium are reported in the present paper. The experiments were carried out with tubes of various dimensions under conditions involving a great variety of discharge parameters

[en] A hybrid (superconducting + soft iron poles and yoke) short model of a helical undulator was designed, built and successfully tested. The parameters of the model were chosen close to the requirements for free electron laser undulators: 10 mm diameter clear bore, 28 mm period, 0.95 T design field. The number of full periods is 6. A NbTi composite multifilamentary strip was used in the winding. During the tests the central magnetic field reached 1.065 T at 1215 A operating current. As far as we are aware, the combination obtained of bore-to-period ratio and magnetic field strength can be considered one of the best achieved practically for helical undulators

[en] We report a proof-of-principle experiment demonstrating that appropriately chosen set of Hermite-Gaussian modes constitutes a Schmidt decomposition for transverse momentum states of biphotons generated in the process of spontaneous parametric down-conversion. We experimentally realize projective measurements in the Schmidt basis and observe correlations between appropriate pairs of modes. We perform tomographical state reconstruction in the Schmidt basis, by direct measurement of single-photon density matrix eigenvalues.

[en] Application of current-carrying elements (CCEs) made of second-generation high-temperature superconductor (2G HTS) in magnet systems of a fusion neutron source (FNS) and other fusion devices will allow their magnetic field and thermodynamic stability to be increased substantially in comparison with those of low-temperature superconductor (LTS) magnets. For a toroidal magnet of the FNS, a design of a helical (partially transposed) CCE made of 2G HTS is under development with forced-flow cooling by helium gas, a current of 20–30 kA, an operating temperature of 10–20 K, and a magnetic field on the winding of 12–15 T (prospectively ∼20 T). Short-sized samples of the helical flexible heavy-current CCE are being fabricated and investigated; a pilot-line unit for production of long-sized CCE pieces is under construction. The applied fabrication technique allows the CCE to be produced which combines a high operating current, thermal and mechanical stability, manufacturability, and low losses in the alternating modes. The possibility of fabricating the CCE with the outer dimensions and values of the operating parameter required for the FNS (and with a significant margin) using already available serial 2G HTS tapes is substantiated. The maximum field of toroidal magnets with CCEs made of 2G HTS will be limited only by mechanical properties of the magnet’s casing and structure, while the thermal stability will be approximately two orders of magnitude higher than that of toroidal magnets with LTS-based CCEs. The helical CCE made of 2G HTS is very promising for fusion and hybrid electric power plants, and its design and technologies of production, as well as the prototype coils made of it for the FNS and other tokamaks, are worth developing now

[en] The concept of the small spherical tokamak project is described, the main objectives of the project are to increase competencies at the University in the training of personnel in the field of physics and technologies of controlled thermonuclear fusion, as well as attracting young people to this area. The implementation of the project also implies giving impetus and new opportunities for improving the methods of plasma diagnostics developed at the University, studies on the plasma surface interactions and computer simulation of processes in the plasma and on the plasma facing surfaces. The installation has a large radius of 25 cm, an aspect ratio of less than 2, and a vertical elongation of ∼ 3, which allows, in principle, for small sizes and costs of the installation, taking into account the subsequent increase in the toroidal field to ∼ 2 T, to carry out important studies for progress in plasma performance in tokamaks. Namely, research on physics of plasma confinement, current drive with RF power and plasma interaction with materials. The project includes a phased implementation with a multiple increase in the magnetic field and plasma current, as well as the possibility of quick and convenient access to the internal elements of the discharge chamber and the simultaneous use of a large number of diagnostics.

[en] The level of knowledge accumulated to date in the physics and technologies of controlled thermonuclear fusion (CTF) makes it possible to begin designing fusion—fission hybrid systems that would involve a fusion neutron source (FNS) and which would admit employment for the production of fissile materials and for the transmutation of spent nuclear fuel. Modern Russian strategies for CTF development plan the construction to 2023 of tokamak-based demonstration hybrid FNS for implementing steady-state plasma burning, testing hybrid blankets, and evolving nuclear technologies. Work on designing the DEMO-FNS facility is still in its infancy. The Efremov Institute began designing its magnet system and vacuum chamber, while the Kurchatov Institute developed plasma-physics design aspects and determined basic parameters of the facility. The major radius of the plasma in the DEMO-FNS facility is R = 2.75 m, while its minor radius is a = 1 m; the plasma elongation is k_9_5 = 2. The fusion power is P_F_U_S = 40 MW. The toroidal magnetic field on the plasma-filament axis is B_t_0 = 5 T. The plasma current is I_p = 5 MA. The application of superconductors in the magnet system permits drastically reducing the power consumed by its magnets but requires arranging a thick radiation shield between the plasma and magnet system. The central solenoid, toroidal-field coils, and poloidal-field coils are manufactured from, respectively, Nb_3Sn, NbTi and Nb_3Sn, and NbTi. The vacuum chamber is a double-wall vessel. The space between the walls manufactured from 316L austenitic steel is filled with an iron—water radiation shield (70% of stainless steel and 30% of water).