[en] Al and Sc-codoped zinc oxide (also expressed as Sc-codoped AZO or ZnO:Al-Sc) films were sputtered on STN glass using RF power sources on ZnO and DC power sources on Al-1.7wt.% Sc alloy. X-ray diffraction (XRD) of the codoped films displayed that they are crystalline and textured at (002) and (103). Examination through transmission electron microscopy (TEM) depicted that these films consists of columnar grains. X-ray photoelectron spectroscopy (XPS) analysis of the films indicated that the O1s comprises O(I), O(II), O(III), and O(IV). The component O(I) centered at 530.00 ± 0.15eV was attributable to Sc₂O₃; the O(III) at 531.25 ± 0.20eV was to the oxygen deficient regions within the matrix of ZnO. The transmittance of visible light (i.e., wavelength in the range from 400 to 800nm) for the film was higher than 80%. The electrical resistivity is lower (1.76 < 2.81Ω-cm), the corrosion-resistance in 3.5% NaCl solution is better for the codoped film in comparison with the usual AZO. Heat treatment of the films (at 200-400^oC for 1h) improved the optical transmittance, electrical conductivity, and corrosion-resistance in saline solution

[en] The JLab 12 GeV upgrade with a proposed solenoid detector and the CLAS12 detector can provide the granularity and three-dimensional kinematic coverage in longitudinal and transverse momentum, 0.1 (le) x (le) 0.5, 0.3 (le) z (le) 0.7 with P_T (le) 1.5 GeV to precisely measure the leading twist chiral-odd and T-odd quark distribution and fragmentation functions in SIDIS. The large x experimental reach of these detectors with a 12 GeV CEBAF at JLab makes it ideal to obtain precise data on the valence-dominated transversity distribution function and to access the tensor charge

[en] We investigated on the structural properties of Al₂O₃ dielectrics grown on TiN metal substrates using an atomic layer deposition technique with tri-methyl-aluminum and either O₃ or H₂O as the precursor and oxidant, respectively. The structural and morphological features of these films were examined by atomic force microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy measurements. We find that Al₂O₃ dielectric films with the O₃ oxidant exhibit a rough morphology, a thick TiO₂ film, and a small amount of contaminants such as carbon and hydrogen. The reason for the rapid diffusion of oxygen atoms into the TiN lattice leads to the formation of TiO₂ layer on the TiN substrate. This is due to the higher oxidation potential of the O₃ compared to the H₂O.