[en] To further research the response of the tearing mode (TM) to dynamic resonant magnetic perturbation (DRMP) on the J-TEXT tokamak, a modified series resonant inverter power supply (MSRIPS) with a function of discrete variable frequency is designed for DRMP coils in this study. The MSRIPS is an AC–DC–AC converter, including a phase-controlled rectifier, an LC filter, an insulated gate bipolar transistor (IGBT) full bridge, a matching transformer, three resonant capacitors with different capacitance values, and three corresponding silicon controlled rectifier (SCR) switches. The function of discrete variable frequency is realized by switching over different resonant capacitors with corresponding SCR switches while matching the corresponding driving frequency of the IGBT full bridge. A detailed switching strategy of the SCR switch is put forward to obtain sinusoidal current waveform and realize current waveform smooth transition during frequency conversion. In addition, a resistor and thyristor bleeder is designed to protect the SCR switch from overvoltage. Manufacturing of the MSRIPS is completed, and the MSRIPS equipment can output current with an amplitude of 1.5 kA when its working frequency jumps among different frequencies. Moreover, the current waveform is sinusoidal and can smoothly transition during frequency conversion. Furthermore, the transition time when the current amplitude rises from zero to a steady state is less than 2 ms during frequency conversion. By using the MSRIPS, the expected discrete variable frequency DRMP is generated, and the phenomenon of the TM being locked to the discrete variable frequency DRMP is observed on the J-TEXT tokamak. (paper)

[en] Disruption caused by locked modes (LMs) is one of the most critical issues to be solved for tokamak fusion reactors. This paper aimed to understand the plasma response to external rotating resonant magnetic perturbations (RMPs), which are applied at a few kilohertz for controlling the pre-existing LMs. In the J-TEXT tokamak, the plasma response to a rotating RMP showed a feature of travelling wave, if no tearing mode (TM) existed. With a LM, the application of a rotating RMP led to unique features of plasma responses, which could be roughly described by the formula δb _θ(θ, t)  =  2Asin(mθ  −  mθ _O)cos(2πf _RRMP t), where δb _θ, A, m, θ _O and f _RRMP are the perturbed poloidal magnetic field, the amplitude, the poloidal mode number, the poloidal location of the TM’s O-point and the frequency of the rotating RMP. These features are analogous to that of a standing wave in the TM rest frame, with the nodes locating at the O-/X- points. The perturbations of electron temperature, T _e, due to plasma responses were zero or minimal inside the magnetic island or outside the magnetic island but at the same poloidal positions as the O-/X- points. Both δb _θ and the T _e perturbations increased linearly with the rotating RMP. A phenomenological model is proposed that the rotating RMP drives the phase oscillation of the TM by applying a periodical electromagnetic torque. Then the phase oscillation of TM, combined with the poloidal gradient of the plasma parameters, induces the plasma response measured experimentally. The nonlinear numerical modelling confirmed the forced phase oscillation of the TM, and qualitatively verified the amplitude and phase dependences among the plasma response, the phase oscillation of the TM and the rotating RMP, which have been predicted by the model. (paper)