Ren, Fei; Qian, Bosen; Schmidt, Robert; Case, Eldon D.; Keum, Jong K.; Littrell, Ken C.; An, Ke, E-mail: renfei@temple.edu, E-mail: kean@ornl.gov, E-mail: renfei@temple.edu, E-mail: kean@ornl.gov2016
AbstractAbstract
[en] Introducing nanostructural second phases has proved to be an effective approach to reduce the lattice thermal conductivity and thus enhances the figure of merit for many thermoelectric materials. Studies of the formation and evolution of these second phases are essential to understanding material temperature dependent behaviors, improving thermal stabilities, as well as designing new materials. In this study, powder samples of the PbTe-PbS thermoelectric material were examined using in situ neutron diffraction and small angle neutron scattering (SANS) techniques between room temperature and elevated temperature up to 663 K, to explore quantitative information on the structure, weight fraction, and size of the second phase. Neutron diffraction data showed that the as-milled powder was primarily a solid solution prior to heat treatment. During heating, a PbS second phase precipitated out of the PbTe matrix around 500 K, while re-dissolution started around 600 K. The second phase remained separated from the matrix upon cooling. Furthermore, SANS data indicated that there are two populations of nanostructures. The size of the smaller nanostructure increased from initially 5 nm to approximately 25 nm after annealing at 650 K, while the size of the larger one remained unchanged. This study demonstrated that in situ neutron techniques are effective means to obtain quantitative information on temperature-dependent nanostructural behavior of thermoelectrics and likely other high-temperature materials.
Primary Subject
Source
(c) 2016 Author(s); Country of input: International Atomic Energy Agency (IAEA)
Record Type
Journal Article
Journal
Country of publication
CALCULATION METHODS, CHALCOGENIDES, COHERENT SCATTERING, DIFFRACTION, DISPERSIONS, HEAT TREATMENTS, HOMOGENEOUS MIXTURES, LEAD COMPOUNDS, MATERIALS, MIXTURES, PHYSICAL PROPERTIES, SCATTERING, SOLUTIONS, SULFIDES, SULFUR COMPOUNDS, TELLURIDES, TELLURIUM COMPOUNDS, TEMPERATURE RANGE, THERMODYNAMIC PROPERTIES
Reference NumberReference Number
INIS VolumeINIS Volume
INIS IssueINIS Issue
External URLExternal URL
Sellami, Neila Bouachir; Ullah, Mohammad Wali; Keum, Jong K.
Energy Frontier Research Centers (EFRC) (United States). Energy Dissipation to Defect Evolution (EDDE); Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States). Funding organisation: USDOE Office of Science - SC, Basic Energy Sciences (BES) (United States)2019
Energy Frontier Research Centers (EFRC) (United States). Energy Dissipation to Defect Evolution (EDDE); Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States). Funding organisation: USDOE Office of Science - SC, Basic Energy Sciences (BES) (United States)2019
AbstractAbstract
[en] The effect of energy deposition by energetic particles on Ni and two single-phase concentrated solid solution alloys (NiFe and NiCoCrFe) is explored through combined experimental and modelling efforts. Damage evolution as a function of increasing ion fluence is monitored via elastic strain developed in the irradiated crystals. We show that damage produced from displacement collision cascades is sensitive to subsequent highly ionizing irradiation that the strain generated by elastic nuclear collisions undergoes partial relaxation upon high-energy irradiation. This result suggests a change in the damage structure upon electronic energy deposition due to both predominant defect annealing and growth of small defect clusters. Strain relaxation, more pronounced in the alloys than in Ni, is ascribed to both higher thermal conductivity and weaker electron-phonon coupling in Ni.
Primary Subject
Source
OSTIID--1564217; AC05-00OR22725; AC02-05CH11231; Available from https://www.osti.gov/servlets/purl/1564217; DOE Accepted Manuscript full text, or the publishers Best Available Version will be available free of charge after the embargo period; arXiv:1902.06358; Country of input: United States
Record Type
Journal Article
Journal
Current Opinion in Solid State and Materials Science; ISSN 1359-0286; ; v. 23(2); p. 107-115
Country of publication
Reference NumberReference Number
INIS VolumeINIS Volume
INIS IssueINIS Issue
External URLExternal URL