[en] Highlights: • Gel polymer electrolytes were synthesized by in situ polymerization of ionic liquid in the lithium polymer cells. • Flammability of the electrolyte was significantly reduced by polymerizing electrolyte containing a non-flammable ionic liquid monomer. • The cells assembled with polymeric ionic liquid-based electrolytes exhibited reversible cycling behavior with good capacity retention. -- Abstract: Lithium polymer cells composed of a lithium negative electrode and a LiCoO₂ positive electrode were assembled with a gel polymer electrolyte obtained by in situ polymerization of an electrolyte solution containing an ionic liquid monomer with vinyl groups. The polymerization of the electrolyte solution containing the non-flammable ionic liquid monomer resulted in a significant reduction of the flammability of the gel polymer electrolytes. The lithium polymer cell assembled with the stable gel polymer electrolyte delivered a discharge capacity of 134.3 mAh g⁻¹ at ambient temperature and exhibited good capacity retention

[en] Magnesium isotope separation was investigated by chemical ion exchange with the 1-aza-12-crown-4 bonded Merrifield peptide resin using an elution chromatographic technique. The capacity of the novel azacrown ion exchanger was 1.0 meq/g dry resin. The heavier isotopes of magnesium were enriched in the resin phase, while the lighter isotopes were enriched in the solution phase. The single stage separation factor was determined according to the method of Glueckauf from the elution curve and isotopic assays. The separation factors of ²⁴Mg²⁺ - ²⁵Mg²⁺, ²⁴Mg²⁺ - ²⁶Mg²⁺, and ²⁵Mg²⁺ - ²⁶Mg²⁺ were 1.008,1.019, and 1.006, respectively

[en] Separation of lithium isotopes was investigated by chemical ion exchange with a hydrous manganese(IV) oxide ion exchanger using an elution chromatography. The capacity of manganese(IV) oxide ion exchanger was 0.5 meq/g. The heavier lithium isotope was enriched in the solution phase, while the lighter isotope was enriched in the ion exchanger phase. The separation factor was determined according to the method of Glueckauf from the elution curve and isotopic assays. The separation factor of ⁶Li⁺ -⁷Li⁺ isotope pair fractionation was 1.018

[en] Separation of lithium isotopes was investigated by chemical ion exchange with a hydrous manganese(IV) oxide ion exchanger using an elution chromatography. The capacity of manfanese(IV) oxide ion exchanger was 0.5 meq/g. One molar CH₃COONa solution was used as an eluent. The heavier isotope of lithium was enriched in the solution phase, while the lighter isotope was enriched in the ion exchangers phase. The separation factor was calculated according to the method of Glueckauf from the elution curve and isotopic assays. The single stage separation factor of lithium isotope pair fractionation was 1.021

[en] Although the publicity activities of nuclear energy has been actively held in our country, considering the necessity of the quantitative evaluation of outcome on this has led to the attempt of this study. There is a need for analysis on the change of understanding before and after visiting nuclear power plant (hereinafter, referred to as NPP). There can be a difference in the increase of understanding on nuclear energy after visiting NPP, classified by the public groups

[en] The Korean nuclear energy community paid a high price in terms of the tremendous social costs incurred in the process of securing a site for mid-to-low radioactive waste disposal facility, indicating that interest in the technical danger of nuclear energy has spread to the realm of people's daily lives. Under the circumstances it is important to raise rational public awareness of nuclear science as a foundation of everyday life through nuclear cultural activities. This study examines the various types of public relations activities of the Korea Nuclear Energy Foundation, an organization in charge of promoting nuclear energy, and explores what activities are required to ensure efficient promotion in accordance with development of nuclear culture

[en] The objective of the present study is to analyze material flow in the metal forming processes by using computer simulation and experiment with model material, plasticine. A UBET program is developed to analyze the bulk flow behaviour of various metal forming problems. The elemental strain-hardening effect is considered in an incremental manner and the element system is automatically regenerated at every deforming step in the program. The material flow behaviour in closed-die forging process with rib-web type cavity are analyzed by UBET and elastic-plastic finite element method, and verified by experiments with plasticine. There were good agreements between simulation and experiment. The effect of corner rounding on material flow behavior is investigated in the analysis of backward extrusion with square die. Flat punch indentation process is simulated by UBET, and the results are compared with that of elastic-plastic finite element method. (Author)

[en] Uterine cervical cancer is globally the third most common cancer among women, and shows high mortality with invasive cervical carcinoma. Early detection of the disease, its correct staging, and treatment are therefore of great importance. The staging system updated in 2009 by the International Federation of Gynecology and Obstetrics (FIGO), is commonly used for planning the treatment. However, there are significant inaccuracies in the FIGO staging system. Accurate tumor staging is very important to decide the treatment strategy. Although not included in the staging system, magnetic resonance (MR) imaging is a valuable tool for local staging of the disease, and is useful in assessing the spread of the tumor and metastatic lymph nodes, thereby becoming a more accurate substitute for clinical staging of cervical carcinoma. In addition, it is capable of assessing the disease response to surgery or chemoradiation. This review briefly describes the role of MR imaging and the basic MR scanning protocol in evaluating cervical carcinoma. The MR findings with staging, and MR evaluation of treatment response, are further addressed

[en] Purpose: To assess the effectiveness and problems of the primary radiation therapy and salvage surgery in a series of patients affected by T1-T2 NO glottic cancers treated from 1985 to 1991 at the Pusan National University Hospital. Materials and Methods: From 8.85 to 12/91, 34 patients affected by early glottic carcinoma histologically proven were treated with curative radiation therapy. Distribution of patients according to T stage was 30 for T1 and 4 T2. Male to female ratio was 33:1. Age of patients ranged from 31 to 73 with mean age of 58 years. All of the patients were treated with radical radiation with total tumor dose of 63-75. 3 Gy(median 68.2 Gy), of 5 weekly fractions of 1.8-2Gy and with 6MV photon beams through two laterally opposed fields. Results: The overall 5-year local control rates were 74%(8/30) for T1, and 25%(3/4) for T2. The main cause of failure was progression or recurrence in T(10/11). One failures were observed in T and N at the same time. Of these 11 patients, 9(81%) were salvaged with surgery. After surgical salvage of radiation failures, the 5-year survival rates were 96% for T1 and 75% T2. Among the survivors, 73% of T1 and 33% of T2 were able to preserve the larynx. Conclusion: It can be concluded that radiotherapy is the first choice in the treatment of glottic T1 carcinoma

[en] Electronic speckle-pattern interferometry (ESPI) was applied for noncontact, real-time evaluation of thermal deformation in a flip-chip package. The spatial resolution of ESPI was increased to submicron scale by magnifying the areas studied in order to measure the deformation of such small-scale components as the solder in the flip-chip package. Thermal deformation in the horizontal and vertical directions around the solder joints was measured as two-dimensional mappings during heating from 25 to 125 deg. C. ESPI was successful in obtaining information on the complicated deformation field around the solder joints. Furthermore, the shear strain could also be calculated using the measured thermal deformation around each solder joint. The applicability of ESPI to flip-chip packages was verified by comparing the ESPI results with those of finite-element analysis (FEA)