[en] We present a design for the Phase-1 upgrade of the Compact Muon Solenoid (CMS) calorimeter trigger system composed of FPGAs and Multi-GBit/sec links that adhere to the μTCA crate Telecom standard. The upgrade calorimeter trigger will implement algorithms that create collections of isolated and non-isolated electromagnetic objects, isolated and non-isolated tau objects and jet objects. The algorithms are organized in several steps with progressive data reduction. These include a particle cluster finder that reconstructs overlapping clusters of 2x2 calorimeter towers and applies electron identification, a cluster overlap filter, particle isolation determination, jet reconstruction, particle separation and sorting.

[en] The CMS Level-1 upgraded calorimeter trigger requires a powerful, flexible and compact processing card. The Calorimeter Trigger Processor Card (CTP7) uses the Virtex-7 FPGA as its primary data processor and is the first FPGA based processing card in CMS to employ the ZYNQ System-on-Chip (SoC) running embedded Linux to provide TCP/IP communication and board support functions. The CTP7 was built from the ground up to support AXI infrastructure to provide flexible and modular designs with minimal time from project conception to final implementation

[en] As the LHC increases luminosity and energy, it will become increasingly difficult to select interesting physics events and remain within the readout bandwidth limitations. An upgrade to the CMS Calorimeter Trigger implementing more complex algorithms is proposed. It utilizes AMC cards with Xilinx FPGAs running in microTCA crate with card interconnections via crate backplanes and optical links operating at up to 10 Gbps. Prototype cards with Virtex-6 and Virtex-7 FPGAs have been built and software frameworks for operation and monitoring developed. The physics goals, hardware architectures, and software will be described in this talk. More details can be found in a separate poster at this conference.

[en] Test results are presented for two AMC cards, the ''CTP6'' and ''MP7''. The two cards take different approaches to connectivity: the CTP-6 has fully-populated backplane connectivity and a 396 Gbps asymmetric, optical interface, whilst the MP7 instead favours a 1.4 Tbps, symmetric, all-optical interface. The challenges of designing the MP7 card necessitated the development of several test cards; the results of which are presented.

[en] When the LHC resumes operation in 2015, the higher centre-of-mass energy and high-luminosity conditions will require significantly more sophisticated algorithms to select interesting physics events within the readout bandwidth limitations. The planned upgrade to the CMS calorimeter trigger will achieve this goal by implementing a flexible system based on the μTCA standard, with modules based on Xilinx Virtex-7 FPGAs and up to 144 optical links running at speeds of 10 Gbps. The upgrade will improve the energy and position resolution of physics objects, enable much improved isolation criteria to be applied to electron and tau objects and facilitate pile-up subtraction to mitigate the effect of the increased number of interactions occurring in each bunch crossing. The design of the upgraded system is summarised with particular emphasis placed on the results of prototype testing and the experience gained which is of general application to the design of such systems