[en] The trend towards larger power ratings of wind turbines asks for innovations in power generation, which requires lower weight and cost, smaller size, higher efficiency and reliability. Due to high current-carrying capability and no DC losses of superconductors, a superconducting wind generator can have a superior power to weight/volume ratio with high efficiency. The work in the book mainly focuses on the feasibility study and design of a superconducting DC wind generator.

[en] Previous studies of test coils have demonstrated the high thermal and electrical stability of no-insulation (NI) high temperature superconducting (HTS) coils thanks to the presence of turn-to-turn current paths. These turn-to-turn current paths in a NI coil are significantly influenced by the contact resistivity. In practice, it is very challenging to measure the contact resistivity of a NI coil by direct experiments of short samples, since the contact resistivity of superconducting tapes is influenced by surface roughness and tolerance, stress, temperature etc. A proper simulation model is needed to investigate the contact resistivity of the NI coils with dedicated experiments. Hence, in this paper a distributed circuit model is employed. This model, implemented in Matlab 2018a, considers the local contact resistivity, self and mutual inductance, and HTS resistance, which depends on the supplied current, magnetic field and temperature. To validate the model, experimental results from literature, including sudden discharge, and charge–discharge processes, are employed and the results from simulations are consistent with experimental results. Then the model is used to investigate the equivalent contact resistivity of a 157-turn NI coil. Through the comparison of simulated and experimental results, it is found that the contact resistivity of the NI coil has an inhomogeneous distribution. When the current changes with different speeds, ramping rates or frequency, a different number of turn-to-turn contacts carries radial current. Since the turn-to-turn contacts have different contact resistivity, the equivalent contact resistivity calculated from sudden discharge cannot be used in simulations to reproduce all the experimental data. (paper)

[en] This paper presents a comprehensive alternating current (AC) loss study of a circular high temperature superconductor (HTS) coated conductor coil. The AC losses from a circular double pancake coil were measured using the electrical method. A 2D axisymmetric H-formulation model using the FEM package in COMSOL Multiphysics has been established to match the circular geometry of the coil used in the experiment. Three scenarios have been analysed: Scenario 1 with AC transport current and DC magnetic field (experiment and simulation); Scenario 2 with DC transport current and AC magnetic field (simulation); and Scenario 3 with AC transport current and AC magnetic field (simulation and experimental data support). The angular dependence analysis on the coil under a magnetic field with different orientation angle θ has been carried out for all three scenarios. For Scenario 3, the effect of the relative phase difference Δφ between the AC current and the AC field on the total AC loss of the coil has been investigated. In summary, a current/field/angle/phase dependent AC loss (I, B, θ, Δφ) study of a circular HTS coil has been carried out. The obtained results provide useful indications for the future design and research of HTS AC systems. (paper)

[en] Superconductors have been being applied to a variety of large-scale power applications, including magnets, electric machines, and fault current limiters, because they can enable a compact, lightweight and high efficiency design. In applications such as those mentioned above, superconducting coils are always a key component. For example, in a superconducting electric machine, the superconducting coils are used to generate the main flux density in the air gap, which is significantly important for the energy conversion. It is the performance of the superconducting coils that plays an essential role in determining the performance of the device. However, the performance of a superconducting coil is limited by its critical current, which is determined by temperature and the magnitude and orientation of the magnetic field inside the superconductors. Hence, in-depth investigations to estimate the critical current of the superconducting coils are necessary before manufacturing. Available transient simulation models to estimate the critical current are through the H- and T-A formulations of Maxwell’s equations. Both methods consider the same current ramp-up process occurring in experiments. Besides these transient models, static simulations can also be used: a modified load-line method and the so-called P-model, which is based on the asymptotic limit of Faraday’s equation when time approaches infinity. To find the best way to calculate the critical current, the four methods are used to estimate the critical current of a double pancake superconducting coils and results are compared with experiments. As a conclusion, T-A formulation, P-model, and the modified load-line methods are recommended for estimating the critical current of the superconducting coils. (paper)

[en] In order to reliably make use of superconductors in wind generators, a double-stator superconducting flux modulation generator is proposed here to avoid rotation of field coils and armature windings. The superconducting field coils are located in the inner stator while the armature windings are placed in the outer stator. In this way, the stationary-rotatory couplings of current and cryogenic coolants for superconducting field coils and/or armature windings are removed. Because of the modulation effect of the reluctance rotor between the two stators and the armature reaction field, moving AC magnetic fields are acted on superconducting coils in the inner stator. These moving AC magnetic fields are called magnetic field harmonics in the flux modulation generators. The frequencies of these harmonics are multiples of rotor mechanical frequency. Compared to synchronous superconducting generators, the amplitudes of the harmonics are higher. Even though methods to reduce the amplitudes of harmonics have been studied, the level of the AC loss in the superconducting field coils is still unknown. In this paper, numerical simulations based on the T–A formulation are used to estimate the AC loss of the superconducting field coils in a 10 MW double-stator superconducting flux modulation generator. It is found that by choosing a suitable working temperature, the AC loss of the superconducting field coils without any harmonic reduction methods is not very high, but eddy current loss of copper thermal shield inside the cryostat is significantly higher. (paper)