[en] An activated concrete sample was counted at different source to detector distances with CdZnTe and HPGe detectors. The experimental count rates for different radionuclides were converted to dose rate using Monte Carlo code and compared with the Measured dose rates obtained using digital survey meter. The results agreed well for both the detectors. This indicates that CdZnTe detector having a better portability but poorer resolution than HPGe detector can be effectively used for online monitoring of radioactivity as well as dose rate calculations. (author)

[en] CdZnTe detector was used to monitor the radioactivity at several locations of primary heat transport (PHT) system of the Tarapur Atomic Power Station-III and IV reactor during shut down as well as operating condition of the reactor. Dose measurements at the same locations were also carried out using a teletector. MCNP code was used to simulate the detector efficiency for the required counting geometry. The efficiencies were then used to convert the experimental count rates (cps) to corresponding activity concentration (Bq/mL) of different radionuclides in coolant water. The total dose rates in these locations were also calculated by summing up the simulated dose rates of individual ? ray energy. The simulated and the measured total dose rates were found to be in reasonably good agreement. (author)