[en] This paper reports on a 6  ×  8 flexible piezoresistive tactile sensor array composed of a multi-walled carbon nanotube (MWCNT)–polydimethylsiloxane (PDMS) composite. The sensor array has properties such as high flexibility, stretchability, uniformity and sensitivity, contributing to the anomalous-shaped surface nano-composite structure on the sensing elements. The sensitivity of the tactile sensor is 16.9–5.41 in a low-pressure range (<300 Pa) and  >0.5 at 1.3 kPa for the 125 µm thick composite sensing materials. The systematic study of the pressure response of the developed tactile sensor array in terms of various composite thickness, temperature, uniformity and repeatability have been conducted. Moreover, an array scanning system has been established and the applied pressure was detected, digitalized and displayed in real-time. This work has high potential for low-range pressure detection and artificial skin applications. (paper)

[en] Using the Weather Research and Forecasting (WRF) model, this paper analyzes the spatiotemporal features of heat waves in 20-year regional climate simulations over East Asia, and investigates the capability of WRF to reproduce observational heat waves in China. Within the framework of the Coordinated Regional Climate Downscaling Experiment (CORDEX), the WRF model is driven by the ERA-Interim (ERAIN) reanalysis, and five continuous simulations are conducted from 1989 to 2008. Of these, four runs apply the interior spectral nudging (SN) technique with different wavenumbers, nudging variables and nudging coefficients. Model validations show that WRF can reasonably reproduce the spatiotemporal features of heat waves in China. Compared with the experiment without SN, the application of SN is effectie on improving the skill of the model in simulating both the spatial distributions and temporal variations of heat waves of different intensities. The WRF model shows advantages in reproducing the synoptic circulations with SN and therefore yields better representations for heat wave events. Besides, the SN method is able to preserve the variability of large-scale circulations quite well, which in turn adjusts the extreme temperature variability towards the observation. Among the four SN experiments, those with stronger nudging coefficients perform better in modulating both the spatial and temporal features of heat waves. In contrast, smaller nudging coefficients weaken the effects of SN on improving WRF’s performances.

[en] The microstructures, phase transformations and shape memory properties of Ti-30Zr-xNb (x = 5, 7, 9, 13 at.%) alloys were investigated. The X-ray diffraction and transmission electron microscopy observations showed that the Ti-30Zr-5Nb, Ti-30Zr-7/9Nb and Ti-30Zr-13Nb alloys were composed of the hcp α′-martensite, orthorhombic α″-martensite and β phases, respectively. The results indicated the enhanced β-stabilizing effect of Nb in Ti-30Zr-xNb alloys than that in Ti-Nb alloys due to the high content of Zr. The differential scanning calorimetry test indicated that the Ti-30Zr-5Nb alloy displayed a reversible transformation with a high martensitic transformation start temperature of 776 K and a reverse martensitic transformation start temperature (A_s) of 790 K. For the Ti-30Zr-7Nb and Ti-30Zr-9Nb alloys, the martensitic transformation temperatures decreased with the increasing Nb content. Moreover, an ω phase transformation occurred in the both alloys upon heating at a temperature lower than the corresponding A_s, which is prompted by more addition of Nb. Although the critical stress in tension of the three martensitic alloys decreased with increasing Nb content, the Ti-30Zr-9Nb alloy showed a critical stress of as high as 300 MPa. Among all the alloys, the Ti-30Zr-9Nb alloy exhibited the maximum shape memory effect of 1.61%, due to the lowest critical stress for the martensite reorientation. - Highlights: •Ti-30Zr-5Nb alloy is composed of hcp α′-martensite with the M_s of 776 K. •Ti-30Zr-7Nb and Ti-30Zr-9Nb alloys are predominated by orthorhombic α″-martensite. •Ti-30Zr-13Nb alloy consists of a single β phase due to the β-stabilizing effect of Nb. •The martensitic transformation temperatures decrease with increasing Nb content. •Ti-30Zr-9Nb alloy shows the maximum shape memory effect of 1.61%.

[en] The phase transformation and microstructures of the deformed Ti-30Zr-5Nb shape memory alloy were investigated. The X-ray diffraction measurements indicated that the Ti-30Zr-5Nb alloy was composed of a single orthorhombic α″-martensite phase. The alloy exhibited one yielding behavior in the tensile test, with a critical stress of ~ 600 MPa and a tensile strain of approximately 15%. A shape memory recovery accompanied by a permanent strain was exhibited in the deformed alloys when heated at 873 K. The permanent strain increased with increasing pre-strain. The microstructure evolution of the deformed alloy was investigated by transmission electron microscopy. The results showed that the martensite reorientation occurred and the dislocations were generated during deformation. The alloy displayed a reversible martensite transformation start temperature as high as 763 K. However, no strain-induced martensite stabilization was found in the deformed alloy with different pre-strain levels, potentially because the large chemical energy of the Ti-30Zr-5Nb alloy depressed the effects of the elastic energy and the dissipative energy. - Highlights: • Ti-30Zr-5Nb alloy is composed of single orthorhombic α″-martensite phase with M_s of 721 K. • No martensite stabilization has been found in Ti-30Zr-5Nb alloy with different pre-strain. • Ti-30Zr-5Nb shows the maximum shape memory effect of 2.75% with a pre-strain of 8%.

[en] With a decadal long period (1998–2010) climate simulation using the Weather Research and Forecasting model at convection-permitting resolution (4 km) (WRF_CPM), the diurnal cycles of precipitation amount (PA), frequency (PF) and intensity (PI) and their related large-scale atmospheric circulations over eastern China are analyzed. The simulations are further compared against the CN05.1, CMORPH v1.0 and the ECMWF Re-Analysis Interim (ERAIN). Results show that WRF_CPM can reasonably represent the observed seasonal rainfall and the atmospheric circulations. As for the features at a sub-daily scale, WRF_CPM is superior at reproducing the diurnal amplitude of PF that is similar to PA in terms of the spatial distribution. Moreover, the diurnal peak timing of summer PF and PA over the three sub-regions, i.e., North China (NC), Yangtze-Huaihe River basin (YHR) and South China (SC), can be properly reproduced by WRF_CPM. The observed precipitation systems exhibit obvious eastward propagation from the Plateau to its downstream, which may be due to the solenoid circulations associated with the low-level anomalous wind and moisture convergence. However, they are almost overestimated by WRF_CPM and in turn causing overestimated precipitation along YHR. The early morning precipitation in WRF_CPM has a larger fraction than CMORPH, which is related to the overestimated nocturnal low-level jet. Whereas, due to the solar heating and the land-sea breezes, the late-afternoon precipitation peak is mainly located along the coasts of eastern China, which matches well with the vertical motion in WRF_CPM.