[en] In this study, the titanium plates, which were modified by NaOH alkali solution, were associated with 3-Aminopropyltriethoxysilane (APTES) films using self-assembled monolayers (SAMs). The surfaces of titanium before and after modification were characterized by scanning electronic microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and attenuated total refraction-Fourier transform infrared spectroscopy (ATR-FTIR). After bonding the APTES films on the modification titanium, the new peaks located around 1095 cm^-1 attributes to siloxane groups indicating that silane agent had been grafted onto the surface of the modification titanium substrate by SAMs. Following the deposition of APTES films on titanium, significant change were seen in the amounts of oxygen, silicon and carbon present on the titanium surface, which were consistent with the anticipated reaction steps.

[en] In this report, we present results from our experiments on composite coatings formed on biomedical titanium substrates by micro-arc oxidation (MAO) in constant-voltage mode. The coatings were prepared on the substrates in an aqueous electrolyte containing calcium acetate and β-glycerol phosphate disodium salt pentahydrate (β-GP). We analyzed the element distribution and phase components of the coatings prepared at different voltages by X-ray diffraction, thin-coating X-ray diffraction, electron-probe microanalysis, and Fourier-transform infrared spectroscopy. The results show that the composite coatings formed at 500 V consist of titania (TiO₂), hydroxylapatite (HA), and calcium carbonate (CaCO₃). Furthermore, the concentration of Ca, P, and Ti gradually changes with increasing applied voltage, and the phase components of the composite coatings gradually change from the bottom of the coating to the top: the bottom layer consists of TiO₂, the middle layer consists of TiO₂ and HA, and the top layer consists of HA and a small amount of CaCO₃. The formation of HA directly on the coating surface by MAO technique can greatly enhance the surface bioactivity. - Highlights: • Coatings prepared on biomedical titanium substrate by micro-arc oxidation • Coatings composed of titania, hydroxyapatite and calcium carbonate • Hydroxyapatite on the coating surface can enhance the surface bioactivity

[en] Immobilizing organic–inorganic hybrid composites onto the implant surface is a promising strategy to improve host acceptance of the implant. The objective of this present study was to obtain a unique macroporous titanium-surface with the organic–mineral composite coatings consisting of gelatin methacrylate hydrogel (GelMA) and hydroxyapatite (HA). A 3-(trimethoxysilyl) propyl methacrylate (TMSPMA) layer was first coated onto the titanium surface, and surface was then covalently functionalized with GelMA using a photochemical method. Mineralization of the GelMA coating on the titanium surface was subsequently carried out by a biomimetic method. After 3-day mineralization, a large number of mineral phases comprising spherical amorphous nanoparticles were found randomly deposited inside GelMA matrix. The resulting mineralized hydrogel composites exhibited a unique rough surface of macroporous structure. The structure of the prepared GelMA/HA composite coating was studied by field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectra (EDS), attenuated total refraction Fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). Water contact angle measurement revealed the hydrophilicity properties of composite coatings. GelMA/HA on titanium after the TMSPMA treatment is very stable when tested in vitro with a PBS solution at 37 °C, due to the role of TMSPMA as a molecular bridge. It was expected that the macroporous GelMA/HA composite coatings might potentially promote and accelerate titanium (Ti)-based implants osseointegration for bone repair and regeneration.

[en] Porous polycaprolactone (PCL) scaffolds were fabricated by combination of porogen-leaching and freeze-drying processes. Ice particulates were used as porogen materials. The porous PCL scaffolds were modified by potassium hydroxide solution with concentration of 1 mol/L at room temperature for 8 h, subsequently biomineralized in simulated body fluid for 2 h and 8 h, respectively. The microstructure and characteristics of the PCL scaffolds were investigated by scanning electron microscope (SEM) and EDS. The results showed (1) PCL scaffolds had high degree of connectivity and different pore sizes. (2) Plate-like apatite was observed on the surface of the scaffolds after being immersed into SBF for 8 h

[en] Highlights: • The phenolic/quinone groups on polydopamine can redox-switchable reversible under electrical stimulation. • The quinone groups on PDA (oxidized PDA) enhanced cell spreading and proliferation. • The phenolic groups on PDA (reduced PDA) induced cell differentiation. - Abstract: Switchable surfaces that respond to external stimuli are important for regulating cell behavior. The results herein suggest that the redox process of polydopamine (PDA) is a switching reaction between oxidized polydopamine and reduced polydopamine, involving an interconversion of coupled two-proton (2H⁺) and two-electron (2e⁻) processes. The redox-switchable reversible surface potential arising from the potential-tunable redox reaction of the phenolic and quinone groups on PDA on titanium induced both cell adhesion and spreading. In vitro experiments demonstrated that the quinone groups on PDA greatly enhanced pre-osteoblasts MC3T3-E1 cell spreading and proliferation. Phenolic groups enhanced the induction of differentiation. The proposed methodology may allow further investigation of switchable surfaces for biological and medical applications.

[en] Nanospheres, nanocones, and nanowires are three typical polypyrrole (PPy) nanoarchitectures and electrochemically polymerized with the dope of chondroitin sulphate (CS) in this study. CS, a functional biomacromolecule, guides the formation of PPy nanoarchitectures as the dopant and morphology-directing agent. Combined with our previous reported other PPy nanoarchitectures (such as nanotube arrays and nanowires), this work further proposed the novel mechanism of the construction of PPy/CS nanoarchitectures with the synergistic effect of CS molecular chains structure and the steric hindrance. Compared to the undoped PPy, MC3T3-E1 cells with PPy/CS nanoarchitectures possessed stronger proliferation and osteogenic differentiation capability. This suggests that PPy/CS nanoarchitectures have appropriate biocompatibility. Altogether, the nanoarchitectured PPy/CS may find application in the regeneration of bone defect. - Highlights: • The formation mechanism of PPy nanoarchitectures was proposed. • CS acted as biofunctional dopant and morphology-directing agent in PPy forming. • PPy-CS nanoarchitectures were dependent on the Py/CS ratio

[en] Highlights: • Designed and reproducible porous titanium scaffolds were produced. • Hydrophilic nanoporous film was built on scaffold. • Apatite coating was deposited on scaffold under the modulation of citrate ions. • Citrate ions could affect CO₃²⁻ incorporation in apatite coatings. - Abstract: Scaffold functionalized with appropriate osteogenic coatings can significantly improve implant-bone response. In this study, with designed model and optimized manufacture parameters, reproducible and precise titanium scaffolds were produced. Reconstructed three-dimensional image and sectional structure of the scaffold were examined by micro-computed tomography and relative software. Alkali treatment was carried out on these manufactured porous scaffolds to produce nanoporous hydrophilic film. After 6 days deposition in simulated body fluid (SBF) containing sodium citrate (SC-SBF), plate-like amorphous calcium phosphate (ACP) coating was deposited on scaffold surface. Ultrasonication tests qualitatively indicated an enhanced adhesion force of apatite coatings deposited in SC-SBF compared to that deposited in SBF. And the effect of citrate ions on the CO₃²⁻ incorporation rate in apatite coating was quantitatively examined by bending vibration of CO₃²⁻ at ∼874 cm⁻¹. Results indicated the highest carbonate content was obtained at the citrate ion concentration of 6 × 10⁻⁵ mol/L in SC-SBF. These three-dimensional porous titanium-apatite hybrid scaffolds are expected to find application in bone tissue regeneration