[en] The oxo-triazole derivative (DTP) was synthesized and its inhibiting action on the corrosion of mild steel in sulphuric acid was investigated by means of weight loss, potentiodynamic polarization, EIS and SEM. The results revealed that DTP was an excellent inhibitor and the inhibition efficiencies obtained from weight loss experiment and electrochemical experiment were in good agreement. Potentiodynamic polarization studies clearly revealed that DTP acted essentially as the mixed-type inhibitor. Thermodynamic and kinetic parameters were obtained from weight loss of the different experimental temperatures, which suggested that at different temperatures (298-333 K) the adsorption of DTP on metal surface obeyed Langmuir adsorption isotherm model.

[en] Silver nanoellipsoids (Ag NEs) with about 40 nm diameter minor axis and 100 nm major axis were prepared by a typical polyol process in the presence of poly(vinyl pyrrolidone), using Cl⁻ as etching agent at the early stage of synthesis and poly(ethylene glycol) at the later stage to control the size. A suspension of these kinds of Ag NEs can resist the coffee-ring effect and deposit uniform films after drying. By contrast, suspensions of spherical silver nanoparticles suffer the coffee-ring effect badly, always leaving a ring on the edge of patterns after evaporation is complete. The reasons behind these phenomena can be mainly attributed to the long-ranged interparticle attraction between Ag NEs that preserves them from being transported by Marangoni flows during the drying process. These Ag NEs will be very useful in the preparation of conductive inks. They can perform well in the solidification process of printed patterns, forming uniform and smooth films, greatly enhancing the printing efficiency. (paper)

[en] Silver nanoparticles (Ag NPs) with a mean size of about 90 nm were synthesized by polyol reduction of silver nitrate with ethylene glycol (EG) in the presence of poly(vinyl pyrrolidone) (PVP). The Ag NPs undergo a spontaneous coalescence in the presence of chloride ions even without a traditional sintering process which occurs at a relatively high temperature. Such behavior can cause a rapid decrease in the resistivity of the patterns fabricated by Ag NPs. Conductive silver lines were successfully fabricated on FR-4 substrate using this method. The resulting conductivity of the silver lines reached about 16% of the bulk silver value, which enables fabrication of conductive patterns on some electronic devices. (paper)

[en] Corrosion inhibition by some new triazole derivatives on mild steel in 1 M hydrochloric acid solutions has been investigated by weight loss test, electrochemical measurement, scanning electronic microscope analysis and quantum chemical calculations. The results indicate that these compounds act as mixed-type inhibitors retarding the anodic and cathodic corrosion reactions and do not change the mechanism of either hydrogen evolution reaction or mild steel dissolution. The studied compounds following the Langmuir adsorption isotherm, and the thermodynamic parameters were determined and discussed. The effect of molecular structure on the inhibition efficiency has been investigated by ab initio quantum chemical calculations. The electronic properties such as highest occupied molecular orbital (HOMO), lowest unoccupied molecular orbital (LUMO) energy levels, energy gap (LUMO-HOMO), dipole moment and molecular orbital densities were calculated.

[en] A rolling circle amplification chemiluminescence immunoassay (RCA-CLIA) was developed for precise quantitation of Aβ in plasma. Capture antibodies conjugated with magnetic beads and detection antibodies with collateral single-stranded DNA (ssDNA) were bound to Aβ42/Aβ40 antigens to form a typical double-antibody sandwich structure. The RCA reaction was triggered by the addition of ssDNA, which generated products with a large number of sites for the binding of acridinium ester (AE)–labeled detection probes, thereby realizing the purpose of the amplification. The RCA-CLIA method had higher sensitivity than conventional CLIA without loss of specificity. Under optimum conditions, the linear range of Aβ42 and Aβ40 detection was 3.9–140 pg/mL and 3.9–180 pg/mL, respectively, with corresponding low detection limits of 1.99 pg/mL and 3.14 pg/mL, respectively. Plasma Aβ42 and Aβ40 were detected in the blood of 21 AD patients and 22 healthy people, wherein this ratio could significantly distinguish AD patients from healthy individuals with a sensitivity of 90.48% and specificity of 63.64% for a cutoff value of 154. The Aβ42/Aβ40 ratio of plasma acts as an accurate indicator for AD diagnosis; therefore, detection of plasma Aβ using the RCA-CLIA exhibits great potential in noninvasive diagnosis and progressive assessment of AD.

[en] The authors describe a method for DNA target recognition and signal amplification that is based on the target-induced formation of a three way junction. The subsequent assembly of two DNA probes releases the inhibitory strand and triggers a downstream strand displacement amplification. This causes the formation of a G-rich single sequence that binds to a hemin monomer with its peroxidase-mimicking properties. The resulting peroxidase (POx) activity is quantified by using H₂O₂ and TMB as the substrate. In the presence of an inhibitor, in contrast, the POx-like activity is strongly reduced. This forms the basis for a highly sensitive DNA assay. It has a 0.8 pM detection limit when operated at a wavelength of 450 nm and was applied to the isothermal determination of target DNA with high selectivity. < Image>.

[en] Electrochemical behaviors of the base electrolyte containing different additives were investigated by galvanostatic potential transient measurements (GM), cyclic voltammetry tests (CV) and potentiostatic measurements. Copper deposits on sputtering copper seed from physical vapor deposition (PVD) were examined by a scanning electron microscope and X-ray diffraction spectra. Cross sections of copper pillars and fine line patterns were observed by metallographic microscope. GM result revealed ethylene oxide-propylene oxide co-polymer (EO/PO) performed a further inhibition on copper deposition in the presence of 60 ppm chloride ions as the increment of EO/PO concentration. GM, CV and potentiostatic results indicated that copper deposition was accelerated by synergetic effects of additives in the base electrolyte containing 60 ppm chloride ions, 20 mg/L EO/PO and 0.7 mg/L bis-(sodium sulfopropyl)-disulfide. Sputtering PVD copper seed with even deposit surface was recommended to form the uniformity of copper deposition through increasing the growing density of copper particles. Oscillatory was employed to form uniform distribution of copper deposits in thickness. Copper grain growth was preferentially [111] textured. Bottom-up copper pillars and fine line patterns with plating uniformity were fabricated to meet the requirement of an accurate impedance and the high density interconnection for IC substrates