[en] Electrospinning of fibrous tissue engineering scaffolds has been traditionally conducted using positive voltages. In the current study, positive voltage (PV) electrospinning and negative voltage (NV) electrospinning were investigated for forming fibrous membranes of poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV). In both PV-electrospinning and NV-electrospinning, the fiber diameter generally increased with increasing needle inner diameter and PHBV concentration but decreased with increasing working distance. The use of a conductivity-enhancing surfactant, benzyl triethylammonium chloride (BTEAC), significantly reduced PHBV fiber diameters from the micron scale to the sub-micron scale. Interestingly, with increasing applied voltage, the fiber diameter increased for PV-electrospinning but decreased for NV-electrospinning. The PV-electrospun fibrous membranes from solutions without BTEAC (PVEfm) and with BTEAC (PVEfm-B) and NV-electrospun membranes from solutions without BTEAC (NVEfm) and with BTEAC (NVEfm-B) were characterized in terms of their structure, wettability, thermal properties and tensile properties. Both PVEfm and NVEfm exhibited similar water contact angles (∼104⁰) but the contact angle of PVEfm-B or NVEfm-B was not measurable. The elongation at break of PVEfm-B or NVEfm-B was significantly higher than that of PVEfm or NVEfm. Using NV-electrospinning or a combination of NV- and PV-electrospinning may be very useful for developing suitable scaffolds for tissue engineering applications.

[en] Poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) fibers containing carbonated hydroxyapatite (CHA) nanoparticles with different CHA amounts (5, 10 and 15 wt%) were electrospun with the aid of ultrasonic power for dispersing the nanoparticles. Scanning electron microscopy and energy-dispersive x-ray spectroscopy results showed that the distribution of CHA within the CHA/PHBV nanocomposite fibers was homogeneous when the CHA content was 10 wt%. Slight particle agglomeration occurred when the CHA content was 15 wt%. The diameters of the electrospun CHA/PHBV nanocomposite fibers and PHBV polymer fibers were around 3 μm. Fourier transform infrared spectroscopic analysis further confirmed the presence of CHA in CHA/PHBV nanocomposite fibers. Both PHBV and CHA/PHBV fibrous membranes exhibited similar tensile properties. Compared with PHBV solvent-cast film, the PHBV fibrous membrane was hydrophobic but the incorporation of CHA nanoparticles dramatically enhanced its wettability. In vitro studies revealed that both types of electrospun fibrous membranes (PHBV and CHA/PHBV) supported the proliferation of human osteoblastic cells (SaOS-2). The alkaline phosphatase activity of SaOS-2 cells seeded on the CHA/PHBV fibrous membranes was higher than that of the cells seeded on the PHBV fibrous membranes after 14 days of cell culture. The electrospun CHA/PHBV nanocomposite fibrous membranes show promises for bone tissue engineering applications.

[en] (Ti, O)/Ti, (Ti, N)/Ti and (Ti, O, N)/Ti composite coatings were fabricated on NiTi shape memory alloy via plasma immersion ion implantation and deposition (PIIID). Surface morphology of samples was investigated using atomic force microscopy (AFM) and scanning electron microscopy (SEM). Cross-sectional morphology indicated that the PIIID-formed coatings were dense and uniform. X-ray diffraction (XRD) was used to characterize the phase composition of samples. X-ray photoelectron spectroscopy (XPS) results showed that the surface of coated NiTi SMA samples was Ni-free. Nanoindentation measurements and pin-on-disc tests were carried out to evaluate mechanical properties and wear resistance of coated NiTi SMA, respectively. For the in vitro biological assessment of the composite coatings in terms of cell morphology and cell viability, osteoblast-like SaOS-2 cells and breast cancer MCF-7 cells were cultured on NiTi SMA samples, respectively. SaOS-2 cells attached and spread better on coated NiTi SMA. Viability of MCF-7 cells showed that the PIIID-formed composite coatings were noncytotoxic and coated samples were more biocompatible than uncoated samples. - Highlights: ► PIIID-formed coatings were fabricated on NiTi SMA to improve its biocompatibility. ► Microstructure, mechanical properties and biocompatibility of coatings were investigated. ► All PIIID-formed composite coatings were noncytotoxic and cytocompatible.