[en] Hormesis and essentiality are likely real and common effects at the level of the individual. However, the widespread incorporation of stimulatory effects into applications of ecotoxicology requires the acceptance of assumptions, value judgements and possibly lowering of water/sediment quality standards. There is also currently little data appropriate for considering hormetic effects in the ecotoxicological context. Except perhaps in the case of fitting concentration-response curves, it is not clear that incorporation of hormetic and essentiality type responses into ecotoxicology is necessary. Furthermore, its incorporation presents considerable intellectual and practical changes for ecotoxicology and could have unanticipated consequences. - The acceptance of hormesis and essentiality in ecotoxicology requires major conceptual changes and considerable new data

[en] Highlights: • 22 organic micro-pollutants were detected in greywater water quality samples. • Micro-pollutants from irrigated greywater have been detected in the local hydrosphere. • Caffeine and DEET in surface water were directly attributable to greywater irrigation. • The extent of micro-pollutants and the risk they pose to hydrosphere is not yet known. -- Abstract: Increased water demands due to population growth and increased urbanisation have driven adoption of various water reuse practices. The irrigation of greywater (water from all household uses, except toilets) has been proposed as one potential sustainable practice. Research has clearly identified environmental harm from the presence of micro-pollutants in soils, groundwater and surface water. Greywater contains a range of micro pollutants yet very little is known about their potential environmental fate when greywater is irrigated to soil. Therefore, this study assessed whether organic micro-pollutants in irrigated greywater were transferred to shallow groundwater and an adjacent surface waterway. A total of 22 organic micro-pollutants were detected in greywater. Six of these (acesulfame, caffeine, DEET, paracetamol, salicylic acid and triclosan) were selected as potential tracers of greywater contamination. Three of these chemicals (acesulfame, caffeine, DEET) were detected in the groundwater, while salicylic acid was also detected in adjacent surface water. Caffeine and DEET in surface water were directly attributable to greywater irrigation. Thus the practice of greywater irrigation can act as a source of organic micro-pollutants to shallow groundwater and nearby surface water. The full list of micro-pollutants that could be introduced via greywater and the risk they pose to aquatic ecosystems is not yet known.

[en] Laboratory-based relationships that model the phytotoxicity of metals using soil properties have been developed. This paper presents the first field-based phytotoxicity relationships. Wheat (Triticum aestivum L.) was grown at 11 Australian field sites at which soil was spiked with copper (Cu) and zinc (Zn) salts. Toxicity was measured as inhibition of plant growth at 8 weeks and grain yield at harvest. The added Cu and Zn EC10 values for both endpoints ranged from approximately 3 to 4760 mg/kg. There were no relationships between field-based 8-week biomass and grain yield toxicity values for either metal. Cu toxicity was best modelled using pH and organic carbon content while Zn toxicity was best modelled using pH and the cation exchange capacity. The best relationships estimated toxicity within a factor of two of measured values. Laboratory-based phytotoxicity relationships could not accurately predict field-based phytotoxicity responses. - Field-based toxicity of Cu and Zn to wheat can be modelled using soil properties. Laboratory-based models should not be used to estimate toxicity in the field

[en] To protect terrestrial ecosystems and humans from contaminants many countries and jurisdictions have developed soil quality guidelines (SQGs). This study proposes a new framework to derive SQGs and guidelines for amended soils and uses a case study based on phytotoxicity data of copper (Cu) and zinc (Zn) from field studies to illustrate how the framework could be applied. The proposed framework uses normalisation relationships to account for the effects of soil properties on toxicity data followed by a species sensitivity distribution (SSD) method to calculate a soil added contaminant limit (soil ACL) for a standard soil. The normalisation equations are then used to calculate soil ACLs for other soils. A soil amendment availability factor (SAAF) is then calculated as the toxicity and bioavailability of pure contaminants and contaminants in amendments can be different. The SAAF is used to modify soil ACLs to ACLs for amended soils. The framework was then used to calculate soil ACLs for copper (Cu) and zinc (Zn). For soils with pH of 4-8 and OC content of 1-6%, the ACLs range from 8 mg/kg to 970 mg/kg added Cu. The SAAF for Cu was pH dependant and varied from 1.44 at pH 4 to 2.15 at pH 8. For soils with pH of 4-8 and OC content of 1-6%, the ACLs for amended soils range from 11 mg/kg to 2080 mg/kg added Cu. For soils with pH of 4-8 and a CEC from 5-60, the ACLs for Zn ranged from 21 to 1470 mg/kg added Zn. A SAAF of one was used for Zn as it concentrations in plant tissue and soil to water partitioning showed no difference between biosolids and soluble Zn salt treatments, indicating that Zn from biosolids and Zn salts are equally bioavailable to plants

[en] For essential elements, such as copper (Cu) and zinc (Zn), the bioavailability in biosolids is important from a nutrient release and a potential contamination perspective. Most ecotoxicity studies are done using metal salts and it has been argued that the bioavailability of metals in biosolids can be different to that of metal salts. We compared the bioavailability of Cu and Zn in biosolids with those of metal salts in the same soils using twelve Australian field trials. Three different measures of bioavailability were assessed: soil solution extraction, CaCl₂ extractable fractions and plant uptake. The results showed that bioavailability for Zn was similar in biosolid and salt treatments. For Cu, the results were inconclusive due to strong Cu homeostasis in plants and dissolved organic matter interference in extractable measures. We therefore recommend using isotope dilution methods to assess differences in Cu availability between biosolid and salt treatments. - Metals in biosolids are not necessarily less bioavailable than their soluble salt.