[en] In this paper, the surface modification of nanoparticles was done, and the organic boron crosslinking agent KB-2 was modified on the surface, and a kind of nano-organic boron crosslinking agent was pre-pared, and the performance evaluation was carried out. The experimental results show that the viscosity of the nano-material and guar gum is more than 70mPas at 150 °C because of its tight net structure. Because nanoparticles can effectively increase the elastic modulus of the system and increase the car-rying capacity, the damage rate of nano-organic boron cross-linking agent is 15.12%, lower than that of organic boron cross-linking agent 20%. (paper)

[en] Constructing a biomimetic scaffold that replicates the complex architecture of intervertebral disc annulus fibrosus (AF) remains a major goal in AF tissue engineering. In this study, a biomimetic angle-ply multi-lamellar polycaprolactone/silk fibroin (PCL/SF) AF scaffold was fabricated. Wet-spinning was used to obtain aligned PCL/SF microfiber sheets, and these were excised into strips with microfibers aligned at +30° or −30° relative to the strip long axis. This was followed by stacking two strips with opposing fiber alignment and wrapping them concentrically around a mandrel. Our results demonstrated that the scaffold possessed spatial structure and mechanical properties comparable to natural AF. The scaffold supported rabbit AF cells adhesion, proliferation, infiltration and guided oriented growth and extracellular matrix deposition. In conclusion, our angle-ply multi-lamellar scaffold offers a potential solution for AF replacement therapy and warrants further attention in future investigations.

[en] Highlights: • A biomimetic IVD composite with circumferentially oriented poly(ε-caprolactone) microfibers alginate hydrogel was constructed. • The IVD implants showed progressive tissue formation after subcutaneous implantation in nude mice. • The biomimetic IVD composites have potential application for IVD replacement. -- Abstract: Tissue engineering technology provides a promising alternative to restore physiological functionality of damaged intervertebral disc (IVD). Advanced tissue engineering strategies for IVD have increasingly focused on engineering IVD regions combined the inner nucleus pulposus (NP) and surrounding annulus fibrosus (AF) tissue. However, simulating the cellular and matrix structures and function of the complex structure of IVD is still a critical challenge. Toward this goal, this study engineered a biomimetic AF-NP composite with circumferentially oriented poly(ε-caprolactone) microfibers seeded with AF cells, with an alginate hydrogel encapsulating NP cells as a core. Fluorescent imaging and histological analysis showed that AF cells spread along the circumferentially oriented PCL microfibers and NP cells colonized in the alginate hydrogel similar to native IVD, without obvious migration and mixing between the AF and NP region. Engineered IVD implants showed progressive tissue formation over time after subcutaneous implantation in nude mice, which were indicated by deposition and organization of extracellular matrix and enhanced mechanical properties. In terms of form and function of IVD-like tissue, our engineered biomimetic AF-NP composites have potential application for IVD replacement.

[en] Highlights: • Cadmium (Cd) exhibited an acute toxicity to primary bone marrow-derived mesenchymal stromal cells (BMMSCs). • Cd induced BMMSC senescence, activation of NF-κB pathway, and mitochondrial dysfunction. • Cd exposure induced osteoporosis and adipogenesis linking to bone ageing in vivo. • Cd impaired bone repair and regeneration in a cranial bone damaging model. • Melatonin and NF-κB inhibitor can partially prevent Cd-induced BMMSC senescence-related defects. Cadmium (Cd) is a heavy metal toxicant as a common pollutant derived from many agricultural and industrial sources. The absorption of Cd takes place primarily through Cd-contaminated food and water and, to a significant extent, via inhalation of Cd-contaminated air and cigarette smoking. Epidemiological data suggest that occupational or environmental exposure to Cd increases the health risk for osteoporosis and spontaneous fracture such as itai-itai disease. However, the direct effects and underlying mechanism(s) of Cd exposure on bone damage are largely unknown. We used primary bone marrow-derived mesenchymal stromal cells (BMMSCs) and found that Cd significantly induced BMMSC cellular senescence through over-activation of NF-κB signaling pathway. Increased cell senescence was determined by production of senescence-associated secretory phenotype (SASP), cell cycle arrest and upregulation of p21/p53/p16^INK4a protein expression. Additionally, Cd impaired osteogenic differentiation and increased adipogenesis of BMMSCs, and significantly induced cellular senescence-associated defects such as mitochondrial dysfunction and DNA damage. Sprague-Dawley (SD) rats were chronically exposed to Cd to verify that Cd significantly increased adipocyte number, and decreased mineralization tissues of bone marrow in vivo. Interestingly, we observed that Cd exposure remarkably retarded bone repair and regeneration after operation of skull defect. Notably, pretreatment of melatonin is able to partially prevent Cd-induced some senescence-associated defects of BMMSCs including mitochondrial dysfunction and DNA damage. Although Cd activated mammalian target of rapamycin (mTOR) pathway, rapamycin only partially ameliorated Cd-induced cell apoptosis rather than cellular senescence phenotypes of BMMSCs. In addition, a selective NF-κB inhibitor moderately alleviated Cd-caused the senescence-related defects of the BMMSCs. The study shed light on the action and mechanism of Cd on osteoporosis and bone ageing, and may provide a novel option to ameliorate the harmful effects of Cd exposure.

[en] Intervertebral discs (IVDs) are structurally complex tissue that hold the vertebrae together and provide mobility to spine. The nucleus pulposus (NP) degeneration often results in degenerative IVD disease that is one of the most common causes of back and neck pain. Tissue engineered nucleus pulposus offers an alternative approach to regain the function of the degenerative IVD. The aim of this study is to determine the feasibility of porous silk fibroin (SF) scaffolds fabricated by paraffin-sphere-leaching methods with freeze-drying in the application of nucleus pulposus regeneration. The prepared scaffold possessed high porosity of 92.38 ± 5.12% and pore size of 165.00 ± 8.25 μm as well as high pore interconnectivity and appropriate mechanical properties. Rabbit NP cells were seeded and cultured on the SF scaffolds. Scanning electron microscopy, histology, biochemical assays and mechanical tests revealed that the porous scaffolds could provide an appropriate microstructure and environment to support adhesion, proliferation and infiltration of NP cells in vitro as well as the generation of extracellular matrix. The NP cell–scaffold construction could be preliminarily formed after subcutaneously implanted in a nude mice model. In conclusion, The SF porous scaffold offers a potential candidate for tissue engineered NP tissue. - Highlights: • Paraffin microsphere-leaching method is used to fabricate silk fibroin scaffold. • The scaffold has appropriate mechanical property, porosity and pore size • The scaffold supports growth and infiltration of nucleus pulposus cells. • Nucleus pulposus cells can secrete extracellular matrix in the scaffolds. • The scaffold is a potential candidate for tissue engineered nucleus pulposus