ProJet b.v.

Sonoco, Tudela (Spain) orders order  Forming Fabric Cleaners from ProJet b.v. ProJet received an order for 2 Forming Fabric Cleaners (ProCleaners - Power Cleaners) from Sonoco for their Paper Machine # 1 in Tudela, Spain. The order was received in the last week of December 2024 and the value of the order will not be disclosed. Delivery will be in Q2 of 2025. PM1 produces Coreboard, using 100% recycled fibers. Recycled is known for its extreme contamination on the Paper Machine Clothing. The ProCleaner with the “ProPlusModeTM” is highly effective in maintaining cleanliness and permeability of Forming Fabrics which is exactly the reason that Sonoco continues to choose for ProJet. The “2.0” head is equipped with more nozzles for continuous cleaning and enhanced cleaning during sheet breaks, the “ProPlusModeTM”. Cleaning water and contamination is effectively evacuated by a vacuum system. The ProCleaner Type F (Forming Fabrics) use a single traversing head, optional equipped with MaxProServices that cover the fabrics almost three times as fast as the existing conventional oscillating showers. Furthermore, Sonoco expects to achieve substantial water savings because the ProJet b.v. Power Cleaner uses only 5.0ltr/min of water; a conventional shower consumes over 160 ltr/min. Furthermore, the ProCleaner delivers the following operational and performance benefits: ·      Substantial cleaning water savings (= operational cost reduction + improved profitability): the Pro Cleaner provides superior cleaning performance, while only consuming 1.3gpm (5.0 liter/min) of water. A conventional oscillating shower consumes over 100gpm of water, leading to substantial more electrical power and waste water treatment costs. ·      Water mist elimination is achieved by the application of air knives that contain water mist and contamination, which is discharged through Venturi tubes and finally into a save all pan. ·      Targeted cleaning enables an operator to control the Cleaner for not only overall CD fabric/felt cleaning but to also apply targeted zone/strip or edge cleaning. ProJet is represented by CELPAP, which has been assisting the Spanish paper industry for the last 30 years to 'know the unknown' and striving to help paper mills gear up and adopt technology driven productions. CELPAP’s constant endeavor has been towards establishing and bringing to the doorsteps of Spanish Paper Mills, new and latest technology which has a direct influence on paper quality and machine run ability. Contact ProJet b.v. via Claus Robberts or Max Robbertsfor more information and a comprehensive quotation. ProJet b.v. Technologies, www.pro-jet.nl and www.projetinc.us

ProJet b.v. received an order from Cheng Loong Corp. for their new BM23 project in Vietnam. ProJet b.v. will supply the entire Wet End Pump Station for all Tail Cutters and Trim Squirts in the machine. The value or further details of this order will not be disclosed. Delivery is scheduled for Q2 in 2025. Besides the Pump Station, ProJet b.v. also has Power Cleaners and MaxProServices in their scope of supply. Please contact Claus Robberts or Max Robberts for more information or a comprehensive quotation. #ProJet #ChengLoongCorp #TailCutters #Pumpstation #service #quality #innovation #marketleader

Toray Industries, Inc.’, Korea, orders Power Cleaner from ProJet b.v. Toray Advanced Composites , a Nonwovens producer in Korea, has ordered a Power Cleaner systems from ProJet b.v.. The order was received in November 2024. The value of the order will not be disclosed. Delivery is scheduled to take place in Q1 of 2025 with a start up in 2025. Toray Industries, Inc. has a total of 12 manufacturing lines, that have a width of 3.2 - 4.6 meters and operate at a speed of up to 1,000m/min. ProJet b.v.’s Power Cleaner assures non-stop production without the need for stopping the line for belt changes or manual cleaning of the belt. As always, the newest system is equipped with a Water Heater that heats up the pressurized water to 100oC, so the cleaning is done with high pressure steam The lines use a spunmelt extrusion processes. Both Spunbond and Meltblown are known to create contamination issues on the conveyor belt (also known as spinbelt), each process having its specific characteristics and belt contamination issues. Belt contamination reduces runnability of the production line and therefore output of face-mask material of the whole plant. ProJet b.v.’s Power Cleaner runs 24 hours per day, using high pressure water that is heated to 100 degrees Celsius (steam), vacuum systems, compressed air and rotating brushes to keep the spinbelt clean. A clean spinbelt guarantees high quality sheet and longest lifetime of the belt ROI calculator: ProJet b.v. understands that each client application is unique. For that reason, ProJet developed an automated ROI-calculator that will be applied to each application. By contacting info@projetinc.us or info@pro-jet.nlProJet will perform a no-charge ROI calculation of any Nonwovens Belt Cleaning application. After inputting the process parameters provided by customers, they will be provided with a ROI-Analysis of each specific application and investment justification. Contact Claus Robberts, Max Robberts, ProJet b.v. or MaxProServices for more information or a comprehensive quotation. ProJet Technologies, www.pro-jet.nl and www.projetinc.us #ProJet #TORAY #spinbelt #cleaning #service #quality #innovation #marketleader

ProJet b.v. successfully started up a total of 10 Cleaners for Wires, Felts and Dryer Fabrics to at ADIPRIMA SURAPRINTA, PT ProJet b.v. received an order for a total 10 ProJet High Pressure Cleaners from ADIPRIMA SURAPRINTA, PT Suparinta for their PM1 and PM3. These 10 Power Cleaners were successfully started up in November 2024.  The Power Cleaners were supplied along with all auxiliary equipment, pumps, control panels, etc. All pumps are provided with redundant systems for maximum reliability. ADIPRIMA SURAPRINTA, PT did a big rebuild of their PM3 which includes the a new Press Section. The new ProJet b.v. Power Cleaners are part of that rebuild and will provide maximum cleanliness and permeability to all 3 sections of the machine, Forming-, Press- and Dryer Section. All ProJet Cleaners are equipped with MaxProServices, chemical and passivation spraying capability Clean Forming Fabrics and Press Felts, with consistently high permeability and dewatering capabilities, delivers important productivity and performance advantages. Better dewatering in the Forming and Press Section leads substantial improvement in dryness level when the sheet leaves the Press Section. Press Felts loose dewatering ability due to the increasing use of secondary fibres, recycling of coated broke, increasing use of sheet fillers, an increased use of recycled mill water supplies, and the increased use of process chemicals. The ProJet system consumes very little water, compressed air, and very little electrical energy.  Advantages of a ProCleaner system over a conventional shower: - Much lower water consumption, up to 95% - Mist evacuation by Venturi - vacuum - Strip cleaning, zone cleaning and edge cleaning - Different nozzle angles: enhanced cleaning - Park position outside machine: possible nozzle change during production & automatic self cleaning Of course, all Power Cleaners for the Dryer Section will be ProJet’s Power Cleaner 2.0, the upgraded version. The upgrade consists of a smaller cleaner head, more nozzles at higher pressure and improved vacuum/discharge system. The combination of all these improvements is an increased cleaning efficiency. ROI calculator: ProJet b.v. understands that each client application is unique. For that reason, ProJet b.v. developed an automated ROI-calculator that will be applied to each application and produced paper grade. By contacting info@projetinc.us or info@pro-jet.nl ProJet b.v. will perform a no-charge ROI calculation of any Forming Fabric, Press Felt or Dryer Fabric application. After inputting the process parameters provided by customers, they will be provided with a ROI-Analysis of each specific application and investment justification. Contact Claus Robberts or Max Robberts at MaxProServices for more information or a comprehensive quotation. ProJet Technologies, www.pro-jet.nl and www.projetinc.us #ProJet #highpressure #PMC #cleaning #service #quality #innovation #marketleader

DSG Papers Pvt. Ltd., India awards order for 7 Cleaners for Wires, Felts and Dryer Fabrics to ProJet b.v. ProJet b.v. received an order for a total 7 ProJet b.v. High Pressure Cleaners from DSG Papers Pvt. Ltd. for their PM2 in Patiala, India. The value of the order will not be disclosed. The order was received in October 2024 and will delivered in Q1 2025. The Cleaners will be supplied along with all auxiliary equipment, pumps, control panels, etc. The new ProJet b.v. Power Cleaners are part of a production improvement project and will provide maximum cleanliness and permeability to all 3 sections of the machine, Forming-, Press- and Dryer Section. At the same time, enormous water and power savings can be achieved. ProCleaners for Forming Fabrics and Press Felts: The ProCleaner for Forming Fabrics and Press Felt uses a single oscillating cleaning head that traverses back and forth over the entire felt width. This provides important advantages over a conventional shower: Ø  Much lower water consumption, up to 95% Ø  Strip cleaning, zone cleaning and edge cleaning Ø  No more dirty streaks caused by plugged nozzles, because all nozzles cover the entire fabric width, instead of only one nozzle covering a certain area Ø  Different nozzle angles: enhanced cleaning Ø  Park position outside machine: possible nozzle change during production & automatic self cleaning Of course, all Power Cleaners for the Dryer Section will be ProJet’s Power Cleaner 2.0, the upgraded version. The upgrade consists of a smaller cleaner head, more nozzles at higher pressure and improved vacuum/discharge system. The combination of all these improvements is an increased cleaning efficiency, exactly what DSG Papers needed for its Dryer Fabrics.  The Power Cleaner cleans the Dryer Fabrics continuously, 24 hours a day, as long as the machine is running. Older technologies are operated in batch cleaning mode, allowing the dryer fabrics to get dirty first, losing permeability, and then trying to restore that permeability again. This leads to uneven permeability profiles over time, mostly leading to paper quality issues and more broke. ROI calculator: ProJet b.v. understands that each client application is unique. For that reason, ProJet developed an automated ROI-calculator that will be applied to each application and produced paper grade. By contacting info@projetinc.us or info@pro-jet.nl ProJet b.v. will perform a no-charge ROI calculation of any Forming Fabric, Press Felt or Dryer Fabric application. After inputting the process parameters provided by customers, they will be provided with a ROI-Analysis of each specific application and investment justification. Contact Claus Robberts or Max Robberts at MaxProServices for more information and/or a comprehensive quotation. ProJet b.v. Technologies, www.pro-jet.nl and www.projetinc.us #ProJet #service #quality #innovation #marketleader

Subam Papers Pvt. Ltd. awards order for Dryer Fabric Cleaners to ProJet b.v. ProJet b.v. received an order for Power Cleaners (dryer fabric cleaners) from Subam Paper, India. The value of the order will not be disclosed. The order was received in September 2024 and will delivered in 2025. Of course, all Power Cleaners will be ProJet b.v.’s Power Cleaner 2.0, the upgraded version. The upgrade consists of a smaller cleaner head, more nozzles at higher pressure and improved vacuum/discharge system. The combination of all these improvements is an increased cleaning efficiency, exactly what Subam Papers needed for its Dryer Fabrics.  The Power Cleaner cleans the Dryer Fabrics continuously, 24 hours a day, as long as the machine is running. Older technologies are operated in batch cleaning mode, allowing the dryer fabrics to get dirty first, losing permeability, and then trying to restore that permeability again. This leads to uneven permeability profiles over time, mostly leading to paper quality issues and more broke. The above graph shows the advantage of continuous cleaning, leading to a more stable moisture profile, less broke and longer lifetime of fabrics. Dryer fabric contamination is on the rise due to the increasing use of secondary fibres, recycling of coated broke, increasing use of sheet fillers, an increased use of recycled mill water supplies, and the increased use of process chemicals. ROI calculator: ProJet b.v. understands that each client application is unique. For that reason, ProJet b.v. developed an automated ROI-calculator that will be applied to each application and produced paper grade. By contacting info@projetinc.us or info@pro-jet.nl ProJet b.v. will perform a no-charge ROI calculation of any Forming Fabric, Press Felt or Dryer Fabric application. After inputting the process parameters provided by customers, they will be provided with a ROI-Analysis of each specific application and investment justification Contact Max Robberts, Claus Robberts or contact MaxProServices for more information. ProJet b.v. Technologies, www.pro-jet.nl and www.projetinc.us #innovation #quality #service #marketleader

Papeles Nacionales s.a. (Grand Bay Tissue) awards ProJet b.v. order for high pressure cleaners for 3 Tissue Machines ProJet b.v. received a massive order for the supply of 6 new high pressure showers (Power Cleaner) for the Forming Fabric and the Felt Sections of 3 Tissue machines (PM2, 3 and 4)  from Papeles Nacionales in Pereira, Colombia. The manufacturing of Tissue Paper leads to contamination on the Forming Fabrics and Press Felts, which require special attention for High Pressure cleaning during production. The order was received in September 2024. The equipment is scheduled to be delivered in 2025 and installation & start-up later in 2025. The value of the order will not be disclosed. The ProJet Cleaners will be installed on the Forming Fabric and on the Felt on PN’s’ Tissue machines 2, 3 and 4. The main 2 reasons for this investment are the superior cleaning efficiency of ProJet Cleaners and enormous savings in water consumption of up to 95%. The ProCleaner Type F (Forming Fabrics) use a single traversing head that cover the fabrics almost three times as fast as the existing conventional oscillating showers. Furthermore, each customer expects to achieve substantial water savings because the ProJet b.v. Cleaner uses only 5.0 ltr/min of water; a conventional shower consumes over 160 l/min. Furthermore, the Pro Cleaner, Type F, delivers the following operational and performance benefits: ·      Substantial cleaning water savings (= operational cost reduction + improved profitability): the Pro Cleaner provides superior cleaning performance, while only consuming 1.3gpm (5.0 liter/min) of water. A conventional oscillating shower consumes over 100gpm of water, leading to substantial more electrical power and waste water treatment costs. ·      Water mist elimination is achieved by the application of air knives that contain water mist and contamination, which is discharged through Venturi tubes and finally into a save all pan. ·      Targeted cleaning enables an operator to control the Cleaner for not only overall CD fabric/felt cleaning but to also apply targeted zone/strip or edge cleaning. ROI calculator: ProJet b.v. understands that each client application is unique. For that reason, ProJet developed an automated ROI-calculator that will be applied to each application and produced paper grade. By contacting Claus Robberts or Max Robberts: info@projetinc.us or info@pro-jet.nl , ProJet b.v. will perform a no-charge ROI calculation of any Forming Fabric, Press Felt or Dryer Fabric application. After inputting the process parameters provided by customers, they will be provided with a ROI-Analysis of each specific application and investment justification. ProJet b.v. Technologies, www.pro-jet.nl and www.projetinc.us MaxProServices #service #quality #innovation #GrandBay #ProJet #marketleader

Meet with ProJet b.v. ‘s Italian Sales Representative Techno Paper S.r.l. at MIAC-Paper Industry Exhibition from 9-11 October in Lucca, Italy. MIAC - from October 9th to 11th in Lucca (Italy). Visit our agency Techno Paper S.r.l. at booth B82! We are looking forward to seeing you! #innovation #powercleaner #ProJet #quality #service #marketleader

ProJet b.v. receives order for a ProCleaners for Press Felts ProJet b.v. received an order from a German packaging grade manufacturing customer (not to be disclosed) for ProCleaners (Power Cleaner) for the Press Felts (“Obertuch”) of their PM1 Paper Machine. The value of this order will not be disclosed. The ProCleaners are scheduled to be delivered in Q4, 2024 with commissioning in 2025. The ProJet b.v. cleaning head is equipped with ProMax (MaxProServices ) chemical spraying capability to enhance cleaning efficiency even further. ProMax can be added continuously or intermittently for the Forming Fabrics. The ProJet b.v. are furthermore equipped with PLUS-mode, which guarantees highest possible cleaning capacity if and when required. Contact Claus Robberts or Max Robberts to learn more details about ProMax and PLUS-mode. This customer justifies the investment based on improvement in sheet quality and reduction in water consumption: the ProCleaner use a single traversing head that cover the wires as fast as the existing conventional oscillating showers. The conventional HP Showers can be eliminated completely. Users of the ProCleaner achieve substantial water savings because the ProJet Cleaner uses only 1.3gpm (5.0 ltr/min) of water; a conventional shower consumes over 40gpm (100ltr/min) ProCleaners for the Press Section will provide the following enormous benefits: ·      Water savings of up to 95% ·      Electrical power savings up to 90% ·      Improved dewatering capacity of the Wire/Felt ·      Reduced number of sheet breaks, improved sheet quality Visit the ProJet b.v. website for more information: www.pro-jet.nl Contact Claus Robberts, Max Robberts or Oscar Robberts for more details or a comprehensive quotation: c.robberts@pro-jet.nl For more information : ProJet b.v. Technologies, www.pro-jet.nl #innovation #service #quality #marketleader

ABTCP 2024 hast started! The ProJet b.v. booth is # 37. Visit us and meet with Claus Robberts to learn more about all the benefits of the Power Cleaner and MaxProServices . #ProJet #ABTCP #Brasil #service #quality #innovation #marketleader