Position Monitoring System (PMS)
Our Position Monitoring System (PMS) is used to display the position of the marine loading arm within its defined operating envelope. The display uses a standard industry PC and is a live feed of the actual position of the marine loading arm.
Share
Características
The PMS is a stand alone unit and works in the following way:
- A pendulum potentiometer located on the inboard arm measures the angle of the inboard arm with respect to vertical.
- A pendulum potentiometer located on the outboard arm measures the angle of the outboard arm with respect to vertical.
- A direct coupled potentiometer located at the base riser swivel joint measures the slewing angle.
- Information from the potentiometers is relayed through a PC hooked to the local control panel.
Features include:
- Remote maintenance
- Display redirection via TCP/IP or modem
Marine Loading Arm - B0030
Includes a rigid link pantograph balancing system with independent counterweights directly linked to the inboard and outboard arm. This ensures accurate balance throughout all maneuvering and connecting positions.
Learn More
Presupuesto
- Scaled display of the loading arms in side and top view
- Display of all loading arms installed on one jetty at the same time (Multi Arm Display)
- Multi Arm Display switching between the jetties
- Display of one single loading arm (Single Arm Display)
- Auto activating of Single Arm Display on alarm
- Alarm Beep and flashing angle indicator on alarm
- Colored alarm ranges
- Operator calibration mode
- Display of percentage of actual position relative to the entire envelope
- Display of actual position in X-, Y- and Z-axis
- History and trend overlay
- Saving of history and event data in CSV-format (Excel compatible)
- Daily history and event files
- Angle sensor diagnostics
- Status indication of the angle sensor data transfer
- Setup menus for the project configuration
Features
Características
The PMS is a stand alone unit and works in the following way:
- A pendulum potentiometer located on the inboard arm measures the angle of the inboard arm with respect to vertical.
- A pendulum potentiometer located on the outboard arm measures the angle of the outboard arm with respect to vertical.
- A direct coupled potentiometer located at the base riser swivel joint measures the slewing angle.
- Information from the potentiometers is relayed through a PC hooked to the local control panel.
Features include:
- Remote maintenance
- Display redirection via TCP/IP or modem
Related Products
Marine Loading Arm - B0030
Includes a rigid link pantograph balancing system with independent counterweights directly linked to the inboard and outboard arm. This ensures accurate balance throughout all maneuvering and connecting positions.
Learn More
Specifications
Presupuesto
- Scaled display of the loading arms in side and top view
- Display of all loading arms installed on one jetty at the same time (Multi Arm Display)
- Multi Arm Display switching between the jetties
- Display of one single loading arm (Single Arm Display)
- Auto activating of Single Arm Display on alarm
- Alarm Beep and flashing angle indicator on alarm
- Colored alarm ranges
- Operator calibration mode
- Display of percentage of actual position relative to the entire envelope
- Display of actual position in X-, Y- and Z-axis
- History and trend overlay
- Saving of history and event data in CSV-format (Excel compatible)
- Daily history and event files
- Angle sensor diagnostics
- Status indication of the angle sensor data transfer
- Setup menus for the project configuration