C.M.B Consulting Services PTY LTD’s Post

𝐏𝐫𝐨𝐛𝐥𝐞𝐦 𝐬𝐨𝐥𝐯𝐢𝐧𝐠 𝐢𝐧 𝐀𝐄𝐂 𝐢𝐧𝐝𝐮𝐬𝐭𝐫𝐲: The AEC industry is vast with multiple stakeholders in each project from design to built. The problems faced by individual stakeholders are different. Further the problems are different for each industry (infrastructure, Oil and Gas, Power distribution etc) and category of job(civil, mechanical, electrical etc). All these problems lead to project delay and cost overrun for a project. Hence unique solutions are required for each problem. However a solution to a single problem cannot solve for the project delays and cost overruns in the project. In the end a General Contactor uses multiple technology solutions for each use case which are difficult to train and scale across an organisation. An end to end integrated one stop platform providing industry and category specific solutions can help the general contractors to improve adoption and collaboration in the industry. The buyer experience and project delivery would be enhanced tremendously with an integrated solution with an industry and category specific approach. #aec #construction #contech #epc #projectmanagement #architecture #procurement

Types of Projects 1. Greenfield Project A new project built from scratch on a previously undeveloped site. 2. Brownfield Project A project that involves renovating or redeveloping an existing site, often with environmental or structural challenges. 3. Retrofit Project A project that involves upgrading or modifying an existing electrical system to improve its performance, efficiency, or safety. 4. Expansion Project A project that involves adding new electrical infrastructure to an existing site or facility. 5. Revamp Project A project that involves overhauling or modernizing an existing electrical system to improve its performance, efficiency, or safety. 6. Relocation Project A project that involves relocating an existing electrical system or infrastructure to a new site or location. 7. Upgrade Project A project that involves upgrading an existing electrical system to improve its performance, efficiency, or safety. 8. Rehabilitation Project A project that involves restoring or rehabilitating an existing electrical system to its original condition. 9. Modernization Project A project that involves updating an existing electrical system with modern technologies, materials, or designs. 10. Decommissioning Project A project that involves safely dismantling or removing an existing electrical system or infrastructure. These categories help engineers, contractors, and stakeholders understand the scope, complexity, and requirements of a project. #StayBlessed #StayHealthy #InhalePeace #ExhaleStress #PMP #PMI #ProjectManagement #Electrical

The stages of construction management for a typical project: 1. *Pre-construction*: - Project planning and initiation - Feasibility studies and site selection - Design development and budgeting - Permitting and approvals 2. *Design*: - Schematic design - Design development - Construction documentation - Bidding and procurement 3. *Pre-mobilization*: - Contract award and negotiation - Project team assembly and training - Site preparation and mobilization - Safety planning and risk assessment 4. *Construction*: - Site work and excavation - Foundation work - Structural construction - Installation of systems (mechanical, electrical, plumbing, etc.) - Finishing work (drywall, painting, flooring, etc.) 5. *Commissioning*: - Testing and balancing of systems - Quality control and assurance - Training for occupants and operators - Final inspections and punch list 6. *Closeout*: - Final completion and handover - Documentation and record-keeping - Warranty and maintenance planning - Post-occupancy evaluation 7. *Post-construction*: - Warranty and defect correction - Maintenance and repairs - Facility management and operations These stages may vary depending on the project's size, complexity, and specific requirements. Effective construction management involves coordinating and controlling these stages to ensure successful project delivery. #projektkrew #projectmanagement #constructionmanagementconsultancy #planningandscheduling #contractsmanagement #costmanagement #estimation #projectmanagementconsultancy #consultancy CMTI - Civil Engg Connect TotalEnergies

Types of Projects 1. Greenfield Project A new project built from scratch on a previously undeveloped site. 2. Brownfield Project A project that involves renovating or redeveloping an existing site, often with environmental or structural challenges. 3. Retrofit Project A project that involves upgrading or modifying an existing electrical system to improve its performance, efficiency, or safety. 4. Expansion Project A project that involves adding new electrical infrastructure to an existing site or facility. 5. Revamp Project A project that involves overhauling or modernizing an existing electrical system to improve its performance, efficiency, or safety. 6. Relocation Project A project that involves relocating an existing electrical system or infrastructure to a new site or location. 7. Upgrade Project A project that involves upgrading an existing electrical system to improve its performance, efficiency, or safety. 8. Rehabilitation Project A project that involves restoring or rehabilitating an existing electrical system to its original condition. 9. Modernization Project A project that involves updating an existing electrical system with modern technologies, materials, or designs. 10. Decommissioning Project A project that involves safely dismantling or removing an existing electrical system or infrastructure. These categories help engineers, contractors, and stakeholders understand the scope, complexity, and requirements of a project. #projectmanagement #EPCproject #Projectplanning #Engineering #pmp.

Our Project Management policies and procedures ensure smooth operations and deliver successful projects in a carefully controlled manner 🎯 ✉️ info@aggroup.com.mt 🖱️aggroup.com.mt #aggroup #aginstallations #projects #malta #mep #electricalworks #electrical #mechanical #plumbing #projects #contractors #malta #contracting #agmaintenance #agturnkey

Barhale appointed to Yorkshire Water’s AMP8 Complex Non-Infrastructure Framework Barhale has secured its place on Yorkshire Water’s Complex Non-Infrastructure Framework to support delivery of the water company’s capital investment programme through the forthcoming Asset Management Plan 8 (AMP8) period from April 2025 to 2030. The civil engineering, infrastructure and tunnelling specialist has been appointed to Lot 1 of the AMP8 framework, for complex works, with Yorkshire Water retaining the option to extend for up to a further five years through the AMP9 period. Delivery of the £850M lot will cover both water and wastewater sites with projects typically ranging from £1m to £35m although with no upper limit. Project scope includes, although is not limited to: pre-construction survey and investigation; design and construction management; design and build based on client’s concept design; and site works (construction, civils, process, mechanical, electrical, controls and instrumentation). Services will include, design, construction, civil engineering, and process works, (encompassing mechanical, electrical, instrumentation and telemetry). The framework will require strong programme management, progress and performance reporting, quality management and commissioning. Mark Wood, Regional Director (Yorkshire) at Barhale, is looking forward to building on the relationship his team established through AMP7 and to working with Yorkshire Water on its largest-ever capital investment programme. https://lnkd.in/e-ZwQXfF

An EPC (Engineering, Procurement, and Construction) project involves the design, procurement, and construction of a facility or infrastructure by a single entity. The stages of an EPC project typically include: 1. Feasibility Study: This initial stage involves determining the technical and economic viability of the project. It includes site surveys, environmental assessments, and cost estimation. 2. Engineering Design: Once the feasibility study is completed and the project is deemed viable, the engineering design phase begins. This stage involves developing detailed engineering plans, drawings, and specifications for the project. 3. Procurement: During this stage, the necessary materials, equipment, and services are procured for the project. This may involve issuing requests for proposals, evaluating bids, and selecting suppliers and contractors. 4. Construction: With the design and procurement phases completed, the construction phase begins. This involves the actual building or installation of the facility or infrastructure according to the engineering plans. 5. Commissioning: After construction is completed, the facility is tested and commissioned to ensure that it operates as intended. This may involve performance testing, system integration, and training of personnel. 6. Handover: The final stage of an EPC project involves handing over the completed facility to the client. This includes transferring ownership, providing documentation, and ensuring that all contractual obligations are met. Overall, the stages of an EPC project are carefully planned and executed to ensure that the project is completed on time, within budget, and to the satisfaction of the client. Effective communication, coordination, and project management are essential throughout each stage to ensure a successful outcome. #project #EPC #oilandgas #engineering #project_management

Hiring for DGM \ GM - Grid & Power Evacuation. #solar #solarrecruitment #solarhiring #hiring #recruitment #solarpower RESPONSIBILITIES:- Detailed engineering, Project planning & Management : • Electrical Balance of plant pertaining to Sub-station (up to 400 KV), Switching stations, and related transmission lines, from concept till commissioning of wind farm, which shall also involve • Review of designs that will meet industry standards and specifications, and meet good engineering practice with excellent constructability. Scrutinizing of civil engineering documents pertaining to eBoP systems of wind farm is desirable. • Conducting power system feasibility studies- independently with in-house tools and jointly along with the utilities/consultants • Maintaining good working relationships with OEM’s, material suppliers, contractors, and any others that affect the quality, schedule and cost of projects. • Draw up plans, proposals and budgets for new projects/extensions of projects in conjunction with the relevant team, and financial staff. • Coordinating and facilitating the various support functionalities like land, legal, finance, installation and the operations team in their discharge of duties.  Initiating and managing the grid connectivity application process  Lead the transmission line route survey studies for 33kV, 220 kV,400KV voltage levels.  Lead and supervise during the construction phase of projects i.e., transmission lines, pooling substations up to 400kV, terminal bay at CTU & STU substations etc.  Responsible of resolving RoW issues for transmission lines along with the Contractor  Interactions with Central Transmission Utility, State TRANSCO’s, CEIG/CEA, Discoms, Consultants, Contractors, and other relevant stakeholders, etc.  Lead on site teams of transmission line/Substations and evacuation system  Monitoring and reporting of the Sub-EPC’s performance and the evaluation thereof  Support and lead public consultation and stakeholder engagement efforts with local communities, landowners, etc. Material Management: Support to SCM for Material procurement, contracts management & vendor development including vendor identification, deployment requirement, rates and contract finalization, review of vendor performance and initiate remedy. Maintenance management : Deep understanding of electrical equipment’s used in EHV/ HV systems and its troubleshooting methods is desirable. Software's knowhow: Knowledge of drawing tools-AutoCAD, project management tools-MS-Projects/ Primavera, MS-office etc. Qualifications and competencies:-  Electrical Engineering from reputed university  Formal Qualification (Construction, Engineering, Project Management)  15+ years working experience in a Transmission line construction & Evacuation approval project environment – supervisory/management role. Drop your CV's to nileshjadhav@waaree.com

Before getting into the project engineering phase, power system planning with the focus on basic design aspects of main power system components must be performed. Based on recommendations resulting from various studies, the project engineering phase, mainly covers the design, tendering and contracting/project implementation phases. This technical article tackles the tendering procedure from a technical point of view. In this technical article the focus is set upon the general procedures and activities during the high-voltage project engineering phase up to contracting/project implementation, after the project has been approved for realization and execution.