Do you need to test water solubility of a test substance to the OECD 105 test guideline? Our phys-chem team can help! OECD explains that ‘the water solubility of a substance is the saturation mass concentration of the substance in water at a given temperature’ - before you start determining water solubility, it’s advisable to understand other information on the substance such as structural formula, vapour pressure and dissociation constant to name a few considerations. Contact Martin Traub with any questions Source: https://lnkd.in/e53XyUQz #watersolubility #chemistry #help
Eurofins Agroscience Product Chemistry’s Post
More Relevant Posts
-
Post : 370 Drinking Water Chemistry.... All the Below Contents include in this document.... • Ion Balance, • PH, • Carbonic Acid Equilibrium, • Saturation Index (SI), • Hardness. #chemistry #water #hardness
To view or add a comment, sign in
-
A collaborative team from The University of Queensland and Xiamen University of Technology in China have designed a molecule to trap sulfate in water. Too much of this naturally occuring sulfate can pollute drinking water and increase the rate of corrosion in pipes. Isn't it great when science is part of the answer to saving our water? #IER #drinkingwater #MarsIsForQuitters https://loom.ly/5fDNOaw
To view or add a comment, sign in
-
Check out our new published article in Journal of Hazardous Materials where we talk about the use of metagenomic data to enchance the machine learning prediction of contaminated groundwater. This article not only shows an increased of prediction accuracy, but also revealing some important microbial indicators using the Feature Importance analysis. Further analysis using the genome- and gene-centric analysis of metagenome reveals the degradation pathway of the petroleum contamination inside one of the microbial indicator. We also discuss some important challenges and future outlook of using gene-based monitoring for quick and accurate groundwater monitoring. For more information, please check out the full-text article on the link below https://lnkd.in/gut6PZXK
To view or add a comment, sign in
-
pH meter: A pH meter is a scientific instrument that measures the hydrogen-ion activity in water-based solutions, indicating its acidity or alkalinity expressed as pH
To view or add a comment, sign in
-
📢Interesting article: Similar Responses of Relatively Salt-Tolerant Plants to Na and K during Chloride Salinity: Comparison of Growth, Water Content and Ion Accumulation 🎓 by Prof. Ievinsh et al., from the University of Latvia 👉https://mhttps://brnw.ch/21wOpwq #electrical conductivity; #halophytes; #ion accumulation; potassium; #salinity; #sodium; #water content
Similar Responses of Relatively Salt-Tolerant Plants to Na and K during Chloride Salinity: Comparison of Growth, Water Content and Ion Accumulation
mdpi.com
To view or add a comment, sign in
-
A new PFAS treatment paradigm is presented in our latest ES&T Letters article. We started with the question: What if we simply (and covalently) transformed PFAS to be highly insoluble (thus unavailable in water)? Led by Susanna Maisto (PhD student) with Doris Hong and Alexandra Griffith, we did just that through a novel, low-energy, green esterification pathway! Article highlights: · In the presence of decanol alone, PFOA readily transforms into a stable fluorinated ester (decylpentadecafluorooctanoate). · The fluorinated ester readily precipitates out of solution due to a significant decrease in solubility. · The mixture of PFOA and decanol, without additional surfactant, is sufficient for the formation of dry, nonaqueous phase emulsions required for the reaction to proceed. · Esterification occurs with a 90% yield near room temperature. · Reaction kinetics, mass balance, and products are detailed via FTIR and 19F qNMR for a range of conditions.
Simple, Green Pathway to Precipitate Perfluorooctanoate (PFOA) via Transformation to an Insoluble Ester
pubs.acs.org
To view or add a comment, sign in
-
Impact of impurities in PEM Water Electrolyzer - Cationic impurities; Degrade performance and lifetime via several mechanisms: substitution of available protons in the membrane and ionomer, adsorption and deposition, and the initiation of unfavorable reactions. - Anionic impurities; Initiation of side reactions (such as the chlorine evolution reaction), adsorption or fouling to catalyst surface, and corrosion of metallic components. - Organic & inert impurities; Organic impurities, adsorption and catalyst dissolution due to organic fuel contamination and inert impurities introduced by water sources. Publication and photo source: https://lnkd.in/gBxUhKcx
To view or add a comment, sign in
-
Real-Time Stack Emission Measurements of Non-Traditional Odorous Species from an Industrial Processing Facility Malodor from industry is a common problem affecting communities with minimal regulation in the United States. Here, Leslie P. Silva and Eric Winegar discuss how selected ion flow tube mass spectrometry (SIFT–MS) offers real-time measurements of the sulfur-, oxygen-, and nitrogen-containing species leading to these odors. Link: https://lnkd.in/e4tncSEh
To view or add a comment, sign in
-
Essential oils of Lauraceae species from Vietnam: An overview chemical profiles and biological activity - https://smpl.is/93ald
To view or add a comment, sign in
264 followers