FOSINA’s Post

🎉Astronergy is excited to announce a strategic collaboration with TÜV Rheinland Group to proceed with the IEC TS 63126:2020 High Temperature Testing (Level 2) project, launched at the World Future Energy Summit 2025 in Abu Dhabi! 🌡IEC TS 63126:2020 focuses on the performance of PV modules and components under extreme high-temperature conditions. Level 2 testing is the most rigorous standard, with testing temperatures reaching up to 110°C. 🎯This partnership represents a significant step for Astronergy to further strengthen the reliability of our products and technologies in some of the harshest climates. With TÜV Rheinland’s expertise, we are committed to achieving more certificates to improve both quality and long-term performance of our products. Stylianos Antellis, Weichun Li #solarpower #reliability #Astronergy #WFES #pvtest #performance

Highly Cited Paper in Inventions MDPI ✨ 📜 A Seasonal Autoregressive Integrated Moving Average with Exogenous Factors (SARIMAX) Forecasting Model-Based Time Series Approach The paper proposes a forecasting framework using a SARIMAX model to predict the long-term performance of Saudi Arabia’s electricity sector (consumption, generation, peak load, and capacity) from 2021 to 2050, demonstrating improved accuracy over simpler models by incorporating seasonal and exogenous factors in the time series analysis. 🎓 Fahad Radhi Alharbi and Dénes Csala, PhD 🏫 Lancaster University Read the full article here: 🔗 https://lnkd.in/eexicVA5 #technology #modeling #communication #electricity

Novel detection system enhances SCS’s thermal mapping system! The newly developed detection system promises a reduction in delivery times, simultaneously minimising measurement uncertainties. A great step forward in delivering detailed temperature maps across gas turbine components. SCS are delighted to announce that yet another development project, co-funded by Innovate UK has been successfully completed. “INtegrated optical ThErmal Phosphorescence System – INTEPS” project ran for 6 months under the Analysis for Innovators (A4I) Innovate UK programme. SCS again successfully collaborated with the National Physical Laboratory (NPL) to enhance the measurement system.   This project has been yet another excellent collaboration project between SCS and NPL’s Phosphor Thermometry group. The newly developed system is expected to have an immediate impact on SCS’s thermal mapping data quality once it is fully integrated into the industrial delivery process.  #thermalmapping #gasturbines #collaborations #NPL #InnovateUK #asmeturboexpo25 #turboexpo25 #asme #SCS

𝗡𝗮𝘃𝗶𝗴𝗮𝘁𝗶𝗻𝗴 𝘁𝗵𝗲 𝗻𝗲𝘅𝘁 𝗳𝗿𝗼𝗻𝘁𝗶𝗲𝗿 𝗶𝗻 𝗴𝗮𝘀 𝘁𝘂𝗿𝗯𝗶𝗻𝗲 𝘁𝗲𝗰𝗵𝗻𝗼𝗹𝗼𝗴𝘆 𝗮𝘁 𝗪𝗧𝗨𝗜 At FIB Industries, our adventure into the heart of gas turbine innovation was led by our explorer, key account manager Robert de Jonge, at the industry-leading WTUI Western Turbine Users conference in Palm Springs, USA. This annual gathering is a beacon for the gas turbine industry, bringing together users, suppliers, and service people to break new ground in innovation, share collective knowledge, and map unexplored areas of maintenance techniques. Diving into a sea of possibilities, the conference unfolded as a vast horizon of potential and showcased the genius of 150 companies through lectures and exhibitions. Here, the latest developments were presented and experienced, providing a panoramic view of what is happening at the cutting edge of gas turbine technology. 𝗧𝗵𝗲 𝗽𝗮𝘁𝗵 𝗮𝗵𝗲𝗮𝗱, 𝗲𝘅𝗽𝗹𝗼𝗿𝗶𝗻𝗴 𝗶𝗻𝗻𝗼𝘃𝗮𝘁𝗶𝗼𝗻 Robert engaged with numerous exhibitors and attended selective lectures, focusing on how the latest trends and technologies can benefit our operations and clients at FIB Industries. His efforts were aimed at identifying potential collaborations and understanding emerging needs within the industry, ensuring that FIB remains at the forefront of innovation. The essence of WTUI — unity, progress, and the relentless pursuit of excellence — resonated deeply with our ethos at FIB Industries. It's a reminder that our journey is both individual and collective, pushing us to explore further, together. As steadfast navigators in our industry, FIB Industries treasures such opportunities to explore, learn, and grow. WTUI 2024 has been a landmark in our ongoing voyage of discovery and innovation. We anticipate the horizon, ready for the next chapter of exploration and success. 𝗕𝗲 𝗽𝗮𝗿𝘁 𝗼𝗳 𝗼𝘂𝗿 𝗷𝗼𝘂𝗿𝗻𝗲𝘆 Join us in this journey and discover how FIB Industries is leading the way in gas turbine innovation. Visit our website to explore our products for gas turbines, and the impact we’re making in the industry. https://lnkd.in/ecY5-jBV Together, let's navigate the future of energy. #WTUI #Conference #FIBIndustries #GasTurbines #LM2500 #LM6000

Visit our Setsafe page to know more about accurate measurement of alpha and beta emitters and related applications

Completion of replacement MSENSE DGA3 at Gulf JP NS. 💡Early fault indication by monitoring trend of gases could be minimizing risk. The early fault indication and trend analysis of a few key gases like hydrogen and carbon monoxide are sufficient for powerful and cost-effcient monitoring. The results can then be contextualized by considering additional operating parameters and environmental conditions to get a better picture of the situation. DGA online measurement for trending should be robust and easy to handle. Gas sensors with long lifetimes and low sensitivity towards ambient infuences should be used. It is very convenient for the user. #MR #Reinhausenthailand #Premiumserviceprovider #MSENSE #MSENSEDGA3 #Thepowerbehindpower

📢 IEA-OES Task 10 Group Meeting – Building Confidence in Numerical Modeling for Wave Energy Converters 🌊 Last Friday, the OES Task 10 group convened at the IST Congress Centre in Lisbon for an insightful meeting that brought together experts from around the globe, both in person and online. The focus was clear: advancing collaboration in numerical modeling for wave energy converters (WECs). Participants included representatives from renowned institutions such as Oregon State University, Delft University of Technology, Aalborg University, National Technical University of Athens, and CorPower Ocean. Discussions bridged continents with insights from experts based in the USA, Europe, Japan, and Australia. The group is set to develop strategies to better address challenges in hydrodynamic interactions and uncertainty analysis in numerical modeling. This meeting reaffirmed the Task 10 group’s commitment in ensuring industry and research collaboration remains at the forefront of innovation. #WaveEnergy #Hydrodynamics #IEAOES

🛰️ Utilizing GHGSAT Data to Locate Emission Sources with Precision. #GHGSat data empowers researchers to pinpoint the exact location of methane emission sources. This is achieved through a combination of techniques: 📊 High-Resolution Data: The exceptional detail of GHGSat data allows for accurate visualization of emission points.  🧭 Wind Direction Modeling: Incorporating wind direction data helps determine the source of the emission plume.  🌀 Emission Morphology Analysis: The shape and characteristics of the emission plume can also provide clues about the source. Gain the ability to pinpoint emission sources with confidence. Apply for free GHGSat data via European Space Agency - ESA TPM: https://lnkd.in/g4Rk3g-Y #ClimateChange #EmissionMonitoring #ESA

🔊 Discover #BATSS consortium! #3 IFP Energies nouvelles (IFPEN): 👉 As a major player in French research and training within the energy, transport, and environmental sectors, IFPEN is dedicated to advancing #sustainableenergy and mobility while prioritizing technological #innovation. ⚡Within BATSS, IFPEN will focus on modelling, electro-thermal and gas flow simulations, and will spearhead the development of life cycle analysis and battery pack costs. Stay tuned to meet all the consortium partners working towards a #SafebyDesign #BatterySystem!

🌟 Orano launches two Sharing Groups for the development of Advanced Modular Reactor fuel! 🎉 We are thrilled to announce the formation of two dedicated Sharing Groups aimed at enhancing collaboration with start-ups for Advanced Modular Reactor (AMR) fuel development! 1. MOX Fast Neutron Reactor (FNR) Sharing Group This group brings together three FNR designers - HEXANA, newcleo, and Otrera Energy – along with Orano. We will focus on the manufacturing and reprocessing of FNR MOX fuel at the Orano la Hague plant, as well as the associated logistics. 2. Fast Neutron Molten Salt Reactor (MSR) Sharing Group Joining forces with three Fast MSR designers - NAAREA, STELLARIA 🌀, and THORIZON - this group will concentrate on the manufacturing and reprocessing of liquid fuel, also at the Orano la Hague plant, as well as on the associated logistics. It will complement the development & research tasks already undertaken in the Frame of the France 2030 consortiums between Orano and respectively Stellaria and Thorizon. 👉 https://lnkd.in/e-htYWZy 💡 Why is this strategic? AMR reactor offers flexible, sustainable solutions to meet growing energy needs. They incorporate innovations such as the optimized use of recycled materials. 🔗 Find out more about our approach and how we collaborate with key players in this new-generation reactor market in France. #Innovation #AMR #SMR