Metexon’s Post

Hey, do you already know 𝘁𝗵𝗲 𝗴𝘂𝘆 𝘄𝗵𝗼 𝗵𝗮𝘀 𝘁𝗵𝗲 𝗵𝗮𝗿𝗱𝗲𝘀𝘁 𝗷𝗼𝗯 𝗮𝘁 𝗶𝗻𝘃𝗔𝗶𝗿𝘁𝗲𝗱𝟯𝗗, and 𝘄𝗵𝗼 𝗻𝗲𝘃𝗲𝗿 𝗴𝗶𝘃𝗲𝘀 𝘂𝗽? 🤔 It's the ℂ𝕋𝕆 𝕒𝕟𝕕 𝕔𝕠-𝕗𝕠𝕦𝕟𝕕𝕖𝕣 𝕠𝕗 𝕚𝕟𝕧𝔸𝕚𝕣𝕥𝕖𝕕𝟛𝔻 Birk Schefczik! 👨🚀 He was able to put his technical excellence in the spotlight at the 𝟭𝟲𝘁𝗵 𝗗𝗮𝗿𝗺𝘀𝘁𝗮𝗱𝘁 𝗣𝗹𝗮𝘀𝘁𝗶𝗰𝘀 𝗗𝗮𝘆 𝗼𝗳 𝗗𝗶𝗴𝗶𝘁𝗮𝗹𝗶𝘇𝗮𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝗦𝘂𝘀𝘁𝗮𝗶𝗻𝗮𝗯𝗶𝗹𝗶𝘁𝘆 𝗶𝗻 𝗝𝘂𝗻𝗲 𝟮𝟬𝟮𝟰 and demonstrated 🚀 𝘀̲𝗼̲𝗺̲𝗲̲𝘁̲𝗵̲𝗶̲𝗻̲𝗴̲ ̲𝘁̲𝗵̲𝗮̲𝘁̲ ̲𝘄̲𝗲̲ ̲𝗮̲𝘀̲ ̲𝗙̲𝗟̲𝗜̲𝗣̲𝗼̲𝗤̲ ̲𝗵̲𝗮̲𝘃̲𝗲̲ ̲𝗻̲𝗲̲𝘃̲𝗲̲𝗿̲ ̲𝘀̲𝗲̲𝗲̲𝗻̲ ̲𝗶̲𝗻̲ ̲𝟯̲𝗗̲ ̲𝗽̲𝗿̲𝗶̲𝗻̲𝘁̲𝗶̲𝗻̲𝗴̲ ̲𝗯̲𝗲̲𝗳̲𝗼̲𝗿̲𝗲̲ 🚀 the production of a fully filled adapter for pipe systems made from 𝕦𝕟𝕞𝕠𝕕𝕚𝕗𝕚𝕖𝕕 𝕚𝕟𝕛𝕖𝕔𝕥𝕚𝕠𝕟-𝕞𝕠𝕦𝕝𝕕𝕒𝕓𝕝𝕖 𝕡𝕠𝕝𝕪𝕡𝕣𝕠𝕡𝕪𝕝𝕖𝕟𝕖 (ℙℙ)! 👀   Sounds unspectacular, but it is anything but - he and Sebastian were able to demonstrate the 𝙪𝙣𝙡𝙞𝙢𝙞𝙩𝙚𝙙 𝙥𝙤𝙨𝙨𝙞𝙗𝙞𝙡𝙞𝙩𝙞𝙚𝙨 of our FLIPoQ-process, which are:   💥 being able to 𝗽𝗿𝗼𝗰𝗲𝘀𝘀 𝗮𝗹𝗺𝗼𝘀𝘁 𝗮𝗻𝘆 𝗽𝗹𝗮𝘀𝘁𝗶𝗰 𝗶𝗻 𝗼𝗿𝗶𝗴𝗶𝗻𝗮𝗹 𝗺𝗮𝘁𝗲𝗿𝗶𝗮𝗹 𝗾𝘂𝗮𝗹𝗶𝘁𝘆 (in this case ISO 10993-1 certified and steam pressure sterilizable)   💥 3D print a MedTec polypropylene that is used in the infusion technique area and is 𝗮𝗽𝗽𝗿𝗼𝘃𝗲𝗱 𝗳𝗼𝗿 𝗯𝗹𝗼𝗼𝗱 𝗰𝗼𝗻𝘁𝗮𝗰𝘁   💥 processing mini-granules using a exclusively for FLIPoQ developed 𝗹𝗶𝗴𝗵𝘁𝘄𝗲𝗶𝗴𝗵𝘁 𝗽𝗲𝗹𝗹𝗲𝘁 𝗲𝘅𝘁𝗿𝘂𝗱𝗲𝗿 from our partner Metexon, which is intended to revolutionize granule-based 3D printing 💥 𝘄𝗼𝗿𝗸𝗶𝗻𝗴 𝗶𝗻 𝗮 𝗵𝗶𝗴𝗵𝗹𝘆 𝘀𝘂𝘀𝘁𝗮𝗶𝗻𝗮𝗯𝗹𝗲 𝘄𝗮𝘆 by saving support structures, energy and time   𝔻𝕠 𝕪𝕠𝕦 𝕙𝕒𝕧𝕖 𝕒 𝕞𝕒𝕥𝕖𝕣𝕚𝕒𝕝 𝕥𝕙𝕒𝕥 𝕚𝕤 𝕤𝕠𝕗𝕥, 𝕙𝕒𝕣𝕕 𝕠𝕣 𝕤𝕡𝕖𝕔𝕚𝕒𝕝 𝕒𝕟𝕕 𝕔𝕦𝕣𝕣𝕖𝕟𝕥𝕝𝕪 𝕟𝕠𝕥 𝟛𝔻 𝕡𝕣𝕚𝕟𝕥𝕒𝕓𝕝𝕖? Then feel free to contact Christian or Paul or Jens here and let's realize your prototype in 3D printing together: 𝕚𝕟𝕗𝕠@𝕗𝕝𝕚𝕡𝕠𝕢.𝕔𝕠𝕞. Many thanks to 𝗣𝗿𝗼𝗳. 𝗗𝗿. Thomas Schröder for opening your network to us and of course to our TechTeam around Birk, Sebastian and Patrick for never giving up! 💪 Thanks to Sophie, Marc, Lucas, Linda, Viviana, Julian, Darmstadt University of Applied Sciences. #invAirted3D #FLIPoQ #ikd #hda #startups #innovation #hessen #darmstadt #frankfurtrheinmain #originalmaterial #medtech #3dprinting #startup #deeptech #polymertech #exist #research #entrepreneur #entrepreneurship #motivation #entrepreneurlife #startupbusiness #innovation