Parker Construction Enterprises Inc’s Post

Fall Protection and Prevention Guide. 𝟭. 𝗜𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝗰𝗲 𝗼𝗳 𝗙𝗮𝗹𝗹 𝗣𝗿𝗼𝘁𝗲𝗰𝘁𝗶𝗼𝗻 - Falls are the leading cause of death in the construction industry, often occurring from open-sided floors or through floor openings. - Even falls from 1.2 to 1.8 meters can cause severe injuries or fatalities. 𝟮. 𝗗𝗲𝗳𝗶𝗻𝗶𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝗠𝗲𝘁𝗵𝗼𝗱𝘀: - Working at Height: Involves working on structures over 1.8 meters above the ground or floor. - Fall Protection: Includes equipment and plans to prevent falls, such as guardrails, hole covers, warning lines, lifelines, and harnesses. 𝟯. 𝗛𝗮𝘇𝗮𝗿𝗱𝘀 𝗮𝗻𝗱 𝗖𝗮𝘂𝘀𝗲𝘀: - Hazards include falling from height or dropping objects that could injure others. - Causes of falls involve engineering factors (missing guardrails, unstable scaffolding), procedural mistakes, psychological factors (fear, careless behavior), and weather conditions (wind, rain, ice). 𝟰. 𝗣𝗿𝗼𝘁𝗲𝗰𝘁𝗶𝗼𝗻 𝗮𝗻𝗱 𝗣𝗿𝗲𝘃𝗲𝗻𝘁𝗶𝗼𝗻 𝗦𝘆𝘀𝘁𝗲𝗺𝘀: - Fall Protection: Safety harnesses, lifelines, safety nets, retractable lanyards. - Fall Prevention: Use of ladders, handrails, access platforms, and guards. 𝟱. 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰 𝗦𝗮𝗳𝗲𝘁𝘆 𝗠𝗲𝗮𝘀𝘂𝗿𝗲𝘀: - Scaffolding: Must have guardrails and solid decking. Workers should use lanyards secured to an anchorage point that supports 2500 kg. - Hole Covers: Should be strong, securely fixed, and clearly marked to avoid trip hazards. - Guardrails: Should be 1.1 meters high and withstand a force of 91 kg. - Ladders: Must extend at least 1 meter above landing platforms and be secured; personnel must use a retractable lifeline when climbing. 𝟲. 𝗣𝗲𝗿𝘀𝗼𝗻𝗮𝗹 𝗙𝗮𝗹𝗹 𝗔𝗿𝗿𝗲𝘀𝘁 𝗦𝘆𝘀𝘁𝗲𝗺𝘀 (𝗣𝗙𝗔𝗦): - Full-body harnesses with lanyards attached to secure anchorage points. - Equipment must be inspected to ensure it is in good condition before use. 𝟳. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗦𝗮𝗳𝗲𝘁𝘆 𝗚𝘂𝗶𝗱𝗲𝗹𝗶𝗻𝗲𝘀: - Do not work at heights if fatigued, if equipment is damaged, or during poor weather conditions. - Understand the potential hazards, ensure PPE is in good condition, and use safe climbing methods.. #FallProtection #WorkplaceSafety #ConstructionSafety #SafetyFirst #HealthAndSafety #OSH #SafetyLeadership #InjuryPrevention #SafetyCulture #PPE #HazardPrevention #RiskManagement

For Day Three of #ConstructionSafetyWeek, we're focusing on Fall Protection. As one the leading causes of death in the construction industry and an OSHA ‘Focus Four’ topic, fall protection discussion is important to ensuring worker safety. Fall protection can be defined as either fall prevention or fall restraint/fall arrest. Barriers, such as guardrails, are the preferred method of fall protection as no special equipment or training is needed by individuals for the barriers to be effective. DO • Select and use an anchorage point which will support 5,000 pounds per employee. • Ensure fall restraint/arrest systems are rigged so an employee cannot fall more than 6 feet. • Tie off above your head/ directly behind you to avoid injury caused by swing falls. • Use the shortest lanyard possible to shorten any fall distance. DON'T • Tie knots in lanyards. • Use water pipes, conduit, light fixtures, or guardrails as anchorage points. • Use lanyards without self-locking hooks. • Extend lanyard reach by joining two or more together. • Let multiple workers use a single anchorage point unless an engineer has designed and approved the anchorage for multiple workers. • Unhook from an anchor when exposed to a fall greater than six feet. #BuildingABetterFuture #AConstructionSolutionsProvider

Fall protection and prevention are essential components of workplace safety, especially for activities involving work at height. The primary goal of fall protection is to prevent falls from occurring in the first place, while fall arrest systems are designed to stop a fall in progress and minimize injury. Effective fall protection strategies begin with a comprehensive hazard assessment to identify potential risks, such as unguarded edges, floor openings, and unstable surfaces. Once hazards are identified, a tailored fall protection plan should be developed, outlining specific safety measures, including the use of guardrails, scaffolds, and personal fall arrest systems. Guardrails are often the first line of defense against falls, serving as barriers around dangerous areas to prevent workers from accidentally stepping off an edge. When guardrails are not feasible, personal fall arrest systems (PFAS) such as harnesses, lanyards, and anchors are critical. These systems must be properly fitted and regularly inspected to ensure they can withstand the forces of a fall. Safety nets can also be installed beneath work areas to catch workers in the event of a fall, providing an additional layer of protection. Training and education play a crucial role in fall prevention. Workers must be trained to recognize fall hazards, use fall protection equipment correctly, and follow safe work practices. Regular refresher courses and on-site demonstrations help reinforce this training and keep safety at the forefront of workers' minds. Additionally, it is vital to have an effective emergency response plan in place, including rescue procedures and readily available equipment, to ensure a prompt response if a fall occurs. Maintaining a strong safety culture in the workplace is equally important. Encouraging open communication about potential hazards and near misses helps identify and mitigate risks before they lead to accidents. Regular inspections and maintenance of fall protection equipment are necessary to ensure they remain in good working condition and comply with safety standards set by organizations like OSHA and ANSI. By combining thorough planning, proper equipment, comprehensive training, and a proactive safety culture, employers can significantly reduce the risk of falls and ensure a safer work environment for all employees working at height.

Scaffolding is crucial for construction but poses risks without strict safety protocols. Inadequate installation, adverse weather, poor materials, and lack of training elevate injury risks. With over 11.4 million Americans in construction, ensuring safety through precise installation, material checks, comprehensive training, and regular inspections is crucial. At Bonifield & Rosenstengel, we advocate for a safer scaffolding environment, protecting workers from accidents and those facing scaffolding-related accidents. To contact us for legal support, visit the link below. 🔗 https://lnkd.in/gSrqByNH #BonifieldRosenstengelLaw #IllinoisPersonalInjury #AccidentInjuryAdvocates #MaximizeYourCompensation #ExperiencedPIAttorneys #FromInvestigatorsToLawyers #IndustryInsightLegalHelp #YourCaseOurPriority #BellevilleILAttorney #StLouisAreaAttorney #PersonalInjuryLawIllinois #OnYourSideLegalSupport #ScaffoldingAccident #WorkInjury

🚧 National Safety Stand Down week: May 6-10, 2024 🚧 Fatalities caused by falls from elevation continue to be a leading cause of death for construction employees, accounting for 395 of the 1069 construction fatalities recorded in 2022 (BLS data). Those deaths were preventable. Let's change this statistic! The National Safety Stand-Down raises fall hazard awareness across the country in an effort to stop fall fatalities and injuries. 🔹 What is Fall Protection? It's not just about wearing a harness—it's about creating a safe environment where every precaution is taken seriously. From guardrails to safety nets, every measure counts. 🔹 Safety Tip: Always check your gear before use. A simple check can save a life! 📢 Take Action: Help us spread the word about the importance of #FallProtection. Like, comment, and share to keep safety a priority! #FallProtection #NationalStandDown4Safety #SafetyStandDown #SAFEJLN #SafetyCulture #ConstructionSafety #SafetyFirst #WorkplaceSafety

Hierarchy of Fall Protection: Practical Examples to Enhance Safety - Falls are one of the leading causes of injuries in construction. Applying the Hierarchy of Fall Protection helps us proactively address fall hazards. Here’s how each level works in practice: 1. Elimination: Remove the need for working at height. For example, assemble materials on the ground before lifting them into place. 2. Passive Fall Prevention: Install guardrails or barriers around edges, like on elevated work platforms, so workers aren’t exposed to fall hazards. 3. Fall Restraint Systems: Use harnesses connected to fixed anchors that restrict movement and keep workers away from edges, like on a roof where only certain areas need access. 4. Fall Arrest Systems: Equip workers with personal fall arrest systems that stop a fall after it starts, essential for tasks where exposure can’t be avoided, like working on scaffolding. 5. Administrative Controls: Implement training, warning signs, and safe work practices. For example, brief workers on safe ladder use and restrict access to high-risk areas. By following this hierarchy, we can create safer job sites and reduce fall-related incidents. Let's build safety from the ground up. #ConstructionSafety #FallProtection #HierarchyOfControls #WorkerSafety #InjuryPrevention

The “Fatal Four” leading causes of construction deaths (falls, struck by equipment, caught between objects, and electrocutions) account for 65% of all construction-related deaths. Out of these four, falls are the leading cause of death accounting for 39% of construction fatalities. It is our mission to protect workers by preventing these deadly job site accidents. WE SAVE LIVES! #fallprotection #safetyculture #construction #safety #safetyfirst #safetyprofessionals #workplacesafety

Head's Up, Tools Down: Safeguarding Against Falling Hazards The dangers of falling objects on worksites can result in various injuries minor in nature (cuts, bruises, sprain or a strain) or more serious (fatality). Objects ranging from large construction materials to small tools pose risks to workers below. To mitigate these risks, both physical and procedural controls are essential. Physical controls include precautions such as guardrails with toe boards, covering floor openings, barricades and tool tethering while procedural controls involve securing loads properly, adhering to good hoisting practices, maintaining good housekeeping, and stacking materials correctly. These measures collectively ensure a safer work environment by preventing objects from falling and causing harm to workers. #gillamstrong #fallingobjects #droppedobjects #hazards #crane #cranehazards #construction #tca #torontoconstructionassociation #bca #barrieconstructionassociation #gvca #greenvalleyconstructionassociation #OGCA #ontariogeneralcontractorsassociation #leagueofchampions

Personal Falls from Height: Hazards - Unprotected edges, floor openings, and skylights pose significant risks. - Unstable surfaces, such as scaffolding or ladders, can lead to falls. - Lack of proper guardrails, covers, or personal fall arrest systems (PFAS). Consequences - Severe injuries, including fractures, spinal injuries, or death. - Legal liabilities and increased insurance costs for the company. Corrective Actions Install Guardrails: Secure guardrails around all open edges and floor openings. 🛠️ Use PFAS: Ensure workers use personal fall arrest systems when working at heights above 6 feet. 🧰 Cover Openings: Use durable and clearly marked covers for floor openings. 🔒 Training: Regular training on fall hazards and the correct use of safety equipment. 📚 2. Material Falls from Height: Leading to Injuries or Property Damage Hazards - Poorly secured materials on scaffolds, cranes, or elevated platforms. - Inadequate barriers around the working area. - Improper lifting or rigging techniques. Consequences - Injuries to workers or bystanders from falling objects. - Damage to equipment, tools, or nearby structures. Corrective Actions Secure Loads: Ensure materials are securely fastened when elevated. 🔗 Install Debris Nets: Use debris nets or toeboards to catch falling objects. 🛡️ Establish Safe Zones: Mark and restrict access to areas below where materials are being lifted or handled. 🚧 Inspection: Regular inspections of equipment and securing mechanisms. 🔍 Proactive management of fall hazards and securing materials on construction sites is essential for safety and minimizing risks. Implementing these corrective actions can significantly reduce the likelihood of injuries or damage, fostering a safer working environment. #HealthAndSafety #ConstructionSafety #FallPrevention #WorkplaceSafety #SafetyFirst #GlobalSafety #SiteSafety #InjuryPrevention #OSH #SafeWorkEnvironment #AccidentPrevention #HeightSafety

As Safety Stand Down week comes to a close, it's crucial to remain vigilant in protecting our workers at height. Fatalities from falls continue to be a leading cause of death in construction, with 395 out of 1069 construction fatalities in 2022 attributed to falls (BLS data). Garlock Safety Systems emphasizes the importance of fall prevention. Our solutions, including Construction and Unprotected Edge Protection, are designed to keep your team safe. Let's continue to prioritize safety and protect your most important asset, your people. #WeProtectPeople #FallPrevention #SafetyStandDown #GarlockSafetySystems