Patrick Daly’s Post

Transcript

I'm back. ICF first floor junction connection detail. So folks, some people have been asking what is a typical detail that's used for connecting their first floor junction to David ICF wall. There is a couple of different AMVIC details to doing this, but this one is the most straightforward cost effective detail. Up here you can see we have square concrete pockets. And the same down here, all along this wall. So to keep everyone under one page, Jason is going from left to right. These pockets, as you can see they are in at 600 centers and what happens with these is there's a Ledger trimmer that's fixed directly onto them all the way along the wall. So you hear all the way along this wall and then the Joy sing, can we top hung or you can use Joyce Hangers onto that. I prefer top hung, very straight system. I'm going to show you section drawing of this. And it's not a fancy drawing. We're out on stage in the real world, so I just threw it on the block. I'll go through. So on a sectional view looking inside ways, that's your concrete pocket to the side. This is your six by two treated timber on the face of it and then you have your Joyce in which is top hung sitting off that some of you have been asked before, what's that line underneath the pockets? That's a fire detail which I'll talk to you about in another video.