The Brain Titans’ Post

SLIME PROFILE 25MM /45MM

SLIME PROFILE 16MM/45MM

What Are Crank Bars? Crank bars are rebar sections that are bent at an angle, typically at points where the internal bending moments and shear forces are highest, such as over supports in beams and slabs. The bent-up shape helps to provide additional resistance against these forces.

Tested the laser out on a piece of harden 4140. Sometime the info gets ground away, or after thought info needs to be added. This is another way to put that info back on a detail! #616engraving #laserengravesteel #toolanddie #detailwork #hardensteel

LarsLap lapblock is a board for hand lapping of small valves with loose seats, such as gas valves. Unlike standard lapblocks, where diamond grit and solvent is added to the surface, the LarsLap lapblock comes with abrasive already in the surface. This prevents damage to the valve seat from abrasive residuals with the wrong grit. It also eliminates the need for buying diamond grit separately. LarsLap lapblock is available with 9, 15 and 25 micron grit. https://lnkd.in/dWXQeAir

Bearings reduce friction by providing smooth metal balls or rollers, and a smooth inner and outer metal surface for the balls to roll against. These balls or rollers "bear" the load, allowing the device to spin smoothly. #bearing #beairngs

Red Spinel 2.05Ct Burma Top Quality Luster . Dimensions (mm) : 8.100 x 6.600 x 4.500mm Weight (cts) : 2.050

Tech Tip: Always install your new hammer replacements in a balanced arrangement in your #PennsylvaniaCrusher and #JeffreyRader Mills to avoid any excess vibrations and damage to your Bearings. Before you do, observe the direction the old hammers are installed to be sure the new ones are installed in the same orientation. Taking photos is a recommended practice. https://lnkd.in/ex_RDUYd #OEMparts #hammers

Metal hose is flexible between pitches, small bending radius, good flexibility and repeatability.