Walkerton Clean Water Centre’s Post

These sessions are hands on and super exciting!!

Highlights from our ongoing Training at Learning & Development Center, FFC-GM. Maintenance of Reciprocating Pump (Hydraulic End). Safety Measures: Wore PPEs and followed LOTO procedures. Maintained a clean, organized environment with proper tool handling and posture. Tools Used: Ring spanner, vernier caliper, inside micrometer, emery paper. Process: Disassembling: Removed yoke bolts, gland nut, gland bushing, and plunger; checked dimensions. Marked valves for reassembly. Observations: Found damaged gland rings, rusted suction valve balls, and damaged discharge valve balls. Maintenance: Replaced gland rings, polished suction valve balls, replaced discharge valve, and repaired rusted areas. Reassembling & Testing: Reassembled in reverse order, conducted water test (no leaks), and secured hydraulic end. Conclusion: Maintenance and testing confirmed effective repair. I carried out this Maintenance with my team; Yasir Mehmood Basit Ali Muzamil Hussain & Sajid Ali. Their dedication and teamwork ensured the pump's efficient operation.

Adhesive training is essential in reducing operator error Here’s how Forgeway can help… Our training offering comes in three levels for all levels of adhesive user: → Operators → Supervisors → Engineers Supervisors and engineers are just as responsible for reducing operator error. Incorrect process design and poor supervising can increase bonding errors. Sufficient training can help reduce this risk. Take a look at the video below to learn more about our training.

This chiller training is summarizing some key points for screw chillers from the Screw Chillers module in Intro to Chillers at Chiller Academy. Chiller Training at https://lnkd.in/duPXnpSg Troubleshooting Guides at hvactime.shop TruTech Tools Promo: HVACTIME

Training is mandatory for all users of mast-climbing platforms. The Fraco training program is industry-recognized and ensures proper equipment use, installation, and maintenance. Fraco provides the following training Levels: Safety & Operation: Learn to operate platforms safely. Installation (Freestanding Base): Install/dismantle platforms on a freestanding base. Installation (Anchoring): Install/dismantle platforms with anchoring. Mechanical: Perform maintenance on platforms. Each level starts with a theoretical component followed by practical training. The hands-on part can last from several hours to several days, depending on the training level. Only certified trainers can conduct these sessions.

This chiller training is from Chiller Academy, Introduction to Chillers, Scroll Chiller module. Chiller Training at https://lnkd.in/duPXnpSg Troubleshooting Guides at hvactime.shop TruTech Tools Promo: HVACTIME

Streamline your audit and corrective action process! Use on-the-job training tools to address root causes and document operator progress! ContinuousImprovement #Audits

How can you optimize the performance of your Cat® equipment? By helping your operators and supervisors take their skills to next level. Talk to us about the structured training program delivered by Caterpillar Equipment Training Solutions (ETS).

Troubleshooting Industrial Controls Training System

Troubleshooting industrial controls training system