No Do-Overs

No Do-Overs

4 WAYS TO FAIL YOUR LEED IAQ TESTING

One of the most misunderstood aspects of receiving LEED 3.2 indoor air testing clearance is how a building can fail or succeed. At Building Air Quality, we’ve worked on a number of projects in recent years where general contractors have been successful, and other projects where the contractor failed miserably. We know where many mistakes are made and how to prevent them. Here are four mistakes made during real projects that can cause your building to fail.

School House Blues

Three years ago, we were involved in a school project where everyone knew what should and should not be done prior to the air testing. Unfortunately, one of the subcontractor’s people noticed a spot of glue on a stair riser. They quickly grabbed a cleaning compound and scrubbed the glue away. Though the bottle was only open for 30 seconds, he later admitted that it took him almost two minutes to get all the glue off of the riser. Two days later, the VOCs emitted by the cleaner showed up during the final air test, causing this project to fail the TVOC air sampling in the area where the work was done.

Takeaway: Manage the emission of airborne chemicals. Limit the use of wet products prior to testing. Things like touching up paint, cleaning smudges, or attempting to glue down loose items can all generate chemical levels that can cause you to fail.

Storage Wars

This project involved LEED air sampling done at a senior center that was attempting to receive the LEED IAQ points. Everything was going along quite nicely until the final location. After setting up the equipment, our investigator walked around the corner and noticed an unusual smell approximately 35 feet from our air sampling. Following his nose, he found a contractor had placed all of his tools and equipment, including open containers of caulk and poorly sealed paint buckets, in a back storage room. The biggest problem was the gas-powered generator, which was leaning to one side and causing gasoline to leak onto the floor. This room was within the occupied spaces and considered part of the test area. The emissions from the gasoline failed the TVOC sampling levels in this area.

Takeaway: Relocate contractor equipment and tools to a location outside of the building.

When Vacuuming is a Big Mistake

While completing a LEED IAQ test in the division headquarters for an Army base in Kansas, custodians came in through a back door and began to sweep and vacuum the office spaces during our sampling. Though we stopped them the moment we caught them, 30–45 minutes had passed before we noticed, and the damage was done. The project had high levels of airborne particulate and needed to be retested three weeks later.

Takeaway: Be aware of airborne particulate matter, and certainly keep the custodial staff “in the loop.”

Who You Gonna Call?

If you want your building to score those LEED IAQ points, you even need the telephone guys in on the act. During a recent project, in spite of all of our warnings and meetings with the general contractor and his subsequent direction to all subcontractors, we encountered a crew of four data installers who were running cabling through wall cavities. On the day of our testing they had removed cover plates to pull cables through dusty wall cavities, kicking up a sufficient amount of particles and dust to cause this project to fail.

Takeaway: Don’t leave cable applications until the last minute.

It is incredibly important that you make sure the areas to be tested are clean and controlled during the days leading up to the air sampling. There are many ways to succeed, but these stories show how easy it is to fail. The contractors we worked with on these particular projects have learned important lessons at expensive costs.

When it comes to LEED testing, you only have one chance to get it right. Once the space is occupied, it is technically too late to get that IAQ point!

To view or add a comment, sign in

More articles by Travis West

  • How to DIY Like a Pro

    How to DIY Like a Pro

    THE HOME AIR FILTER HACK YOU NEED FOR NEXT FIRE SEASON Last summer, my daughter, Monica, called me in a panic from her…

  • Business Logistics of the North Pole

    Business Logistics of the North Pole

    ONE COMPANY YOU WOULDN’T WANT TO RUN If you think running your business is tough, try thinking about how Santa operates…

  • Your Guide to Choosing the Right Air Filter

    Your Guide to Choosing the Right Air Filter

    KEEP THE AIR IN YOUR BUILDING SCRUBBED CLEAN Are your building’s energy bills going up unexpectedly? Is your HVAC…

  • Getting Better Indoor Air Quality

    Getting Better Indoor Air Quality

    A large majority of the indoor air quality (IAQ) problems that we investigate are caused by airborne particles. Also…

  • Something in the Air

    Something in the Air

    STRANGE CASES OF IAQ MYSTERIES While most indoor air quality issues are pretty straightforward, the mix of…

    2 Comments
  • Air Quality Education

    Air Quality Education

    TRAVIS REVIEWS ‘HEALTHY BUILDINGS’ By the time you reach 80, you will have spent 72 years of your life indoors. This…

    1 Comment
  • Catching the Real Culprit

    Catching the Real Culprit

    A LOOK AT IAQ AND DUST Achoo! A-a-a-choo! AAAchoo! It’s like a domino effect. Suddenly, everyone in the office is…

  • The Results Are In!

    The Results Are In!

    2 WEEKS OF REMODELING WREAKED HAVOC ON OUR HOME’S AIR QUALITY The air quality Kaye and I experienced during our kitchen…

  • Your Fireplace Could be Hurting Your Health

    Your Fireplace Could be Hurting Your Health

    JUST LIKE A CAVE-DWELLER’S COOKING FIRE! Even though Roman Emperor Justinian I declared that clean air was a birthright…

  • HOW TRAVIS SAVED A BALLROOM FULL OF LIVES

    HOW TRAVIS SAVED A BALLROOM FULL OF LIVES

    The Wacky World of IAQ A few years ago, I was called in to help a local hotel with the aftermath of a water leak. That…

Insights from the community

Others also viewed

Explore topics