Leading sandwich bread baker fined after worker loses finger

A nationwide bakery has been fined more than £360,000 after one of its employees lost a finger in machinery at a site in Northamptonshire.

Jacksons Bakery, a leading supplier of bread used in the commercial making of sandwiches, was given the fine after an engineer had a finger on his right hand caught in a flour sifting machine.

The then 31-year-old was assisting colleagues as they attempted to maintain the machine by clearing a blockage at the plant in Corby on 2 February 2023. Following removal of a guard, as the engineer assisted with the task, he checked the tension of a drive belt and his hand got pulled around the bottom pully which resulted in the amputation of part of his right middle finger.  The engineer was unaware that the machine had been switched back on.

An investigation by the Health and Safety Executive (HSE) found that Jacksons Bakery Limited failed to ensure, so far as is reasonably practicable, the health, safety and welfare of all their employees.

In this instance there was a failure to implement a safe system of work ensuring that machinery was isolated and then locked off during maintenance work when fixed guards would be removed.

Additionally, HSE found that engineers were unclear on when to isolate and ‘lock out tag out’ machines due to an absence of adequate training and instruction – and the fact that it was custom and practice to not robustly isolate and lock off illustrated an absence of adequate supervision and monitoring.

Jacksons Bakery Limited of The Riverside Building, Liverstone Road, Hessle, East Yorkshire, HU13 0DZ, pleaded guilty to contravening a requirement of section 2(1) of the Health and Safety at Work etc Act 1974.

The company was fined £366,666 and was ordered to pay £5,386 costs at a hearing at Wellingborough Magistrates Court on 3 October 2024.

After the hearing, HSE inspector Rebecca Gibson said “This unnecessary incident highlights the duty on employers to ensure that there are robust procedures in place relating to maintenance activities.

“If an appropriate ‘lock out tag out’ procedure had been produced and implemented and with suitable training, the serious injury would have been avoided.”

Source: HSE