Would you like to know 3 ways to improve the efficiency of cone crushing production?

Every quarrying pursues to get high-capacity and high-efficiency production.

But in addition to the equipment itself, operations in production are also closely related to its efficiency. 

The following production suggestions can improve efficiency to a certain extent and obtain large production capacity for con crusher.

1.Adjust the size of the edge of the discharge port to change the output.

The output of the equipment can be achieved by adjusting the size of the closed-edge discharge opening.

When the size of the closed-edge discharge port is larger, the output of the cone-breaker is higher, and the quality of the finished product is worse; on the contrary, the smaller the size of the closed-edge discharge port, the smaller the output, the better the quality of the finished product.

2. Even pacing feeding conveyor belt

When feeding, the belt conveyor is required to input materials uniformly. The materials must meet the requirements of the crusher of the cone crusher. Too much or too little material will affect the production efficiency of the equipment.

In addition, the operator needs to pay close attention to the discharge situation of the discharge port of the cone crusher, control the speed of the belt conveyor, and ensure the normal feeding and discharging.

3.Max loading of the feeding capacity

When installing the feeding device, pay attention to the relationship between the speed of the ore entering the crusher and the corresponding drop. Normally, since the conveyor speed does not change, the only choice is the drop height of the ore. While crowding the ore feed, it should be noted that the feeding can not be more and less, and the height of the ore pile in the feeding device should be controlled.

Sandrock mining is your best choice for long lifetime crusher wear parts. BRANDS SUPPORTED Terex Cedarapids, Terex Jaques, Terex Finlay, Terex Pegson, Sandvik, Sandvik Extec, Metso, Nordberg Symons, Telsmith, Svedala, Parker, Brown Lenox, Tesab. Allis Chalmer, Austin Western, Goodwin Barsby, Hewitt Robins, Kawasaki, Kodiak, Kun Ken, Lippmann, MinYu, Komatsu, Trio.

Call us or click www.sandrockmining.com to know more about the cone crusher and jaw crusher wear parts!