Deformation Stability of Al 7075/20%SiC<sub>p</sub> (63 μm) Composites during Hot Compression

Journals Menu

Follow SCIRP

ISSN Print: 2161-7538
ISSN Online: 2161-7546
www.scirp.org/journal/gm
E-mail: gm@scirp.org

Citations

"Deformation Stability of Al 7075/20%SiC_p (63 μm) Composites during Hot Compression"
written by M. Rajamuthamilselvan, S. Ramanathan,
published by Geomaterials, Vol.2 No.4, 2012

has been cited by the following article(s):

[1]	Deformation Behavior and Plastic Instability of Ultra-High Strength Low Alloy Steel over Wide Temperature and Velocity Range
	Journal of Materials …, 2024

[2]	Hot deformation behaviour and optimization of process parameters for an as-cast Cu–20Ni–20Mn alloy
	Journal of Materials Research …, 2023

[3]	Effect of temperature and strain rate on the compressive deformation response of closed-cell aluminium hybrid foams
	Journal of Alloys and …, 2022

[4]	Processing Route Optimization and Characterization of Al6063–SiCp Metal-Matrix Composite Sheets
	Metals, 2022

[5]	Hot deformation flow behavior of powder metallurgy based Al-SiC and Al-Al2O3 composite in a single step and two-step uni-axial compression
	2019

[6]	REINFORCEMENT AND HOT WORKABILITY OF ALUMINIUM ALLOY 7075 PARTICULATE COMPOSITES: A REVIEW
	2018

[7]	Study on the Hot Workability of SiCp/Al Composites Based on a Critical Strain Map
	Journal of Materials Engineering and Performance, 2017

[8]	Effect of TiB2 Addition on the Microstructure and Mechanical Properties of Al-Cu-Mg-Ag Alloy
	2016

[9]	Flow Stress Prediction of SiCp/Al Composites at Varying Strain Rates and Elevated Temperatures
	Journal of materials engineering and performance, 2014

[1]	Deformation Behavior and Plastic Instability of Ultra-High Strength Low Alloy Steel over Wide Temperature and Velocity Range Journal of Materials Engineering and Performance, 2024 DOI:10.1007/s11665-023-08145-4

[2]	Deformation Behavior and Plastic Instability of Ultra-High Strength Low Alloy Steel over Wide Temperature and Velocity Range Journal of Materials Engineering and Performance, 2023 DOI:10.1007/s11665-023-08145-4

[3]	Processing Route Optimization and Characterization of Al6063–SiCp Metal-Matrix Composite Sheets Metals, 2022 DOI:10.3390/met12040536

[4]	Hot deformation flow behavior of powder metallurgy based Al-SiC and Al-Al2O3 composite in a single step and two-step uni-axial compression Materials Characterization, 2019 DOI:10.1016/j.matchar.2019.03.047

[5]	Study on the Hot Workability of SiCp/Al Composites Based on a Critical Strain Map Journal of Materials Engineering and Performance, 2017 DOI:10.1007/s11665-017-2860-y

[6]	Flow Stress Prediction of SiCp/Al Composites at Varying Strain Rates and Elevated Temperatures Journal of Materials Engineering and Performance, 2014 DOI:10.1007/s11665-013-0838-y

Follow SCIRP