Nasser Afify, Abdel-Fattah Gaber, Ghada Abbady
DOI: 10.4236/msa.2011.25056   PDF    HTML     8,238 Downloads   14,502 Views   Citations

Abstract

This article deals with investigation of fine-scale precipitation in Al-Mg-Zn alloys with compositions of Al - 2 at% Mg- x at% Zn, (x = 1.8, 2 and 4.2). The precipitates morphology was examined by scanning electron microscope (SEM) and correlated with the microhardness (HV) and differential scanning calorimetry (DSC) of the specimens. The precipitates are characterized as h’ (MgZn2) and h (MgZn₂) phases of hexagonal structure of the same composition with a slight difference in lattice parameters. In addition, T-phase pf composition (Mg₃₂ (Al, Zn)₄₉) having a cubic crystal structure. Owing to the determined activation energies of the precipitates, the kinetics associated with their nucleation and growth can be characterized. The thermal energy acquired during aging leads to the agglomeration of precipitates to or larger particle sizes.

Keywords

Al-Mg-Zn Alloys, Coherent Precipitates, Aging, Microhardness, Scanning Electron Microscopy, Precipitation Kinetics

Share and Cite:

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	S. Celotto, “TEM Study of Continuous Precipitation in Mg-9 wt%Al-1 Wt%Zn Alloy,” Acta materialia, Vol. 48, No. 8, May 2000, pp. 1775-1787. doi:10.1016/S1359-6454(00)00004-5
[2]	C. R. Brooks, “Heat Treatment, Structure and Properties of Nonferrous Alloys,” American Society Metals, Metals Park, 1984.
[3]	L. Hadjadj, R. Amira, D. Hamana and A. Mosbah, “Characterization of Precipitation and Phase Transformations in Al-Zn-Mg Alloy by the Differential Dilatometry,” Journal of Alloys and Compounds, Vol. 462, No. 1-2, August 2008, pp. 279-283. doi:10.1016/j.jallcom.2007.08.016
[4]	S. K. Maloney, K. Hono, I. J. Polmear and S. P. Ringer, “The Chemistry of Precipitates in an Aged Al-2.1Zn-1.7 Mg at% alloy,” Scripta Materialia, Vol. 41, No. 10, 1999, pp. 1031-1038. doi:10.1016/S1359-6462(99)00253-5
[5]	N. Afify, A. Gaber, M. S. Mostafa and Gh. Abbady, “Influence of Si Concentration on the Precipitation in Al-1 at% Mg Alloy,” Journal of Alloys and Compound, Vol. 462, No. 1-2, August 2008, pp. 80-87. doi:10.1016/j.jallcom.2007.08.043
[6]	T. Ma and G. Den Ouden, “Softening Behaviour of Al-Zn-Mg Alloys Due to Welding,” Materials Science and Engineering A, Vol. 266, No. 1-2, 1999, pp. 198-204. doi:10.1016/S0921-5093(99)00020-9
[7]	M. Chemingui, M. Khitouni, K. Jozwiak, G. Mesmacque and Abd. Kolsi, “Characterization of the Mechanical Properties Changes in an Al-Zn-Mg Alloy after a Two- Step Aging Treatment at 70? and 135?C,” Material and Design, Vol. 31, No. 6, June 2010, pp. 3134-3139. doi:10.1016/j.matdes.2009.12.033
[8]	M. Chemingui, M. khitouni, G. Mesmacque and A.W. Kolsi, “Effect of Heat Treatment on Plasticity of Al-Zn-Mg Alloy: Microstructure Evolution and Mechanical Properties,” Physics Procedia, Vol. 2, No. 3, November 2009, pp. 1167-1174. doi:10.1016/j.phpro.2009.11.079
[9]	F. S. Bovard, “Environmentally Induced Cracking of an Al-Zn-Mg-Cu Alloy,” M. Sc. Thesis, University of Pittsburgh, Pittsburgh, 2005.
[10]	A. Deschamps and Y. Bréchet, “Influence of Quench and Heating Rates on the Aging Response of an Al-Zn-Mg- (Zr) Alloy,” Materials Science and Engineering A, Vol. 251, No. 1-2, August 1998, pp. 200-207. doi:10.1016/S0921-5093(98)00615-7
[11]	C. H. Gür and ?. Y?ld?z, “Non-Destructive Investigation on the Effect of Precipitation Hardening on Impact Tough- ness of 7020 Al-Zn-Mg Alloy,” Materials Science and Engineering A, Vol. 382, No. 1-2, September 2004, pp. 395-400. doi:10.1016/j.msea.2004.05.001
[12]	S. K. Maloney, K. Hono, I. J. Polmear and S. P. Ringer, “The Effects of a Trace Addition of Silver upon Elevated Temperature Aging of an Al-Zn-Mg Alloy,” Micron, Vol. 32, No. 8, 2001, pp. 741-747.
[13]	T. Engdahl, V. Hansen P. J. Warren and K. Stiller, “Investigation of Fine Scale Precipitates in Al-Zn-Mg Alloys after Various Heat Treatments,” Materials Science and Engineering A, Vol. 327, No. 1, April 2002, pp. 59-64. doi:10.1016/S0921-5093(01)01876-7
[14]	M. Kiritani, Y. Shimomura and Sho Yoshida, “Shape of Voids in Quenched Aluminum,” Journal of the Physical Society of Japan, Vol. 19, No. 9, 1964, pp. 1624-1631. doi:10.1143/JPSJ.19.1624
[15]	A. Gaber, “Precipitation Kinetics in Supersaturated Aluminum-Magnesium Alloys,” Aluminum Transactions (USA), Vol. 1, No. 1, 1999, pp. 93-102.
[16]	H. E. Kissinger, “Variation of Peak Temperature with Heating Rate in Differential Thermal Analysis,” Journal of Research of the National Bureau of Standards, Vol. 57, No. 4, October 1956, pp. 217-221.
[17]	S. Yannacopoulos, S. O. Kasap, A. Hedayat and A. Verma, “An Experimental Study of Phase Transformations in an Al-Zn-Mg-Zr Alloy: DSC and Hot Microhardness Measurements,” Canadian Metallurgical Quarterly, Vol. 33, No. 1, 1994, pp. 51-60.
[18]	M. Ohta, T. Kobayashi and A. Sakakibara, “On the Apparent Activation Energy for Clustering in Dilute Al-Zn alloys,” Memoirs of the School of Engineering Okayama University, Vol. 12, 1978, pp. 77-88.
[19]	K. Asano and K. Hirano, “Precipitation Process in an Al-Zn-Mg Alloy,” Transactions of the Japan Institute of Metals, Vol. 9, No. 1, 1968, pp. 24-34.
[20]	Kinzaku, “Data Book,” Japan Institute of Metals, Sendai, 1994.