|
[1]
|
D. Stewart, “A Platform with Six Degrees of Freedom,” Proceedings of the Institution of Mechanical Engineer, Vol. 180, No. 15, 1965, pp. 371-386.
doi:10.1243/PIME_PROC_1965_180_029_02
|
|
[2]
|
J. -P. Merlet, “Parallel Robots, Solid Mechanics and Its Applications,” Kluwer, Norwell, 2001.
|
|
[3]
|
J. -P. Merlet, “Still a Long Way to Go on the Road for Parallel Mechanisms,” A Keynote Speech at Design Engineering Technical Conferences, Montreal, 29 September-2 October 2002.
|
|
[4]
|
J. -P. Merlet, “Parallel Robots, Open Problems,” INRIA Sophia-Antipolis, France. http://www.-sop.inria.fr
|
|
[5]
|
L. -W. Tsai, “Robot Analysis, The Mechanics of Serial and Parallel Manipulators,” Wiley, New York, 1999.
|
|
[6]
|
P. Bosscher, A. T. Riechel and I. Ebert-Uphoff, “Wrench- Feasible Workspace Generation for Cabledriven Robots,” Journal of Intelligent and Robotic Systems, Vol. 22, No. 4, 2006, pp. 890-902.
|
|
[7]
|
A. T. Riechel and I. Ebert-Uphoff, “Force-Feasible Work- space Analysis for Underconstrained Pointmass Cable Robots,” Proceedings of IEEE International Conference on Robotics and Automation, New Orleans, 26 April-1 May 2004, pp. 4956-4962.
|
|
[8]
|
S. Kawamura, W. Choe, S. Tanaka and S. R. Pandian, “Development of an Ultrahigh Speed FALCON Using Wire Drive System,” In Proceedings of the 1995 IEEE International Conference on Robotics and Automation, 21-27 May 2003, pp. 215-220.
|
|
[9]
|
P. Lafourcade, M. Llibre and C. Reboulet, “Design of a Parallel Wire-Driven Manipulator for Wind Tunnels,” In Proceedings of the Workshop on Fundamental Issues and Future Research Directions for Parallel Mechanisms and Manipulators, Quebec, 3-4 October 2002, pp. 187-194.
|
|
[10]
|
X. Diao, O. Ma and R. Paz, “Study of 6-DOF Cable Robots for Potential Application of HIL Microgravity Contact-Dynamics Simulation,” In Proceedings of the AIAA Modeling and Simulation Technologies Conference and Exhibit, Keystone, 21-24 August 2006, pp. 1097-1110.
|
|
[11]
|
P. Gallina, G. Rosati and A. Rossi, “3-D.O.F. Wire Driven Planar Haptic Interface,” Journal of Intelligent and Robotic Systems,Vol. 32, No. 1, 2001, pp. 23-36.
doi:10.1023/A:1012095609866
|
|
[12]
|
J. Albus, R. Bostelman and N. Dagalakis, “The NIST Robocrane,” Journal of Robotic Systems, Vol. 10, No. 5, 1993, pp. 709-724. doi:10.1002/rob.4620100509
|
|
[13]
|
Y. Q. Zheng, “Workspace Analysis of a Six DOF Wire- Driven Parallel Manipulator,” Proceedings of the WORKSHOP on Fundamental Issues and Future Research Derection for Parallel Mechanisms and Manipulators, Quebec, 3-4 October 2002, pp. 287-293.
|
|
[14]
|
W. J. Shiang, D. Cannon and J. Gorman, “Dynamic Analysis of the Cable Array Robotic Crane,” Proceedings of the IEEE International Conference on Robotics and Automation, Detroit, 10-15 May 1999, pp. 2495-2500.
|
|
[15]
|
J. J. Slotine and W. Leiping, “Applied Nonlinear Control,” Prentice Hall, Englewood Cliffs, 1991.
|
|
[16]
|
H. Khalil, “Nonlinear Systems,” 3rd Edition, Prentice-Hall, Upper Saddle River, 2002.
|
|
[17]
|
J. Richalet, A. Raault, J. L. Testud and J. Papon, “Model Predictive Heuristic Control: A pplication to Industry Processes,” Automatica, Vol. 14. No. 2, 1978, pp. 413-428.
doi:10.1016/0005-1098(78)90001-8
|
|
[18]
|
C. E. Garcia, D. M. Prett and Morari, “Model Predictive Control: Theory and Practice—a Survey,” Automatica, Vol. 25, No. 3 1989, pp. 335-348.
doi:10.1016/0005-1098(89)90002-2
|
|
[19]
|
A. B. Alp and A. K. Agrawal, “Cable Suspended Robots: Design, Planning and Control,” International Conference on Robotics Robotics & Automation, Washington, D.C., 9-13 May 2002, pp. 556-561.
|
|
[20]
|
S. R. Oh and A. K. Agrawal, “Controller Design for a Non-redundant Cable Robot Under Input Constraint,” ASME International Mechanical Engineering Congress & Exposition, 16-21 November 2003, Washington, D.C.
|
|
[21]
|
S. R. Oh and A. K. Agrawal, “A Control Lyapunov Ap- proach for Feedback Control of Cable-Suspended Ro- bots,” IEEE International Conference on Robotics and Automation, 10-14 April 2007, pp. 4544-4549.
|
|
[22]
|
F. Franklin, J. Powell and L. Workman “Digital Control of Dynamic Systems” 2nd Edition, Addison Wesley, Boston, 1994, pp. 40-70.
|
|
[23]
|
K. R. Muske and J. B. Rawlings, “Model predictive control with linear models,” AIChE Journal, Vol. 39, No. 2, 1993, pp. 262-287. doi:10.1002/aic.690390208
|
|
[24]
|
A. Ghasemi, M. Eghtesad and M. Farid “Neural Network Solution for Forward Kinematics Problem of Cable Robot,” Journal of Intelligent and Robotic Systems, Vol. 60, No. 2, 2010, pp. 201-215.
doi:10.1007/s10846-010-9421-z
|