PRV6, PARV6
Vishay Sfernice
Fully Sealed Potentiometers Cermet (PRV6)
Conductive Plastic (PARV6)
FEATURES
•
PRV6 high power rating 1.5 Watt at 70 °C
•
PARV6 0.75 Watt at 70 °C
•
CECC 41300
•
Military performances
•
Low cost
•
Fully sealed and panel sealed
•
Compatible RV6 (MIL R 94)
•
Mechanical life 50 000 cycles
RoHS
COMPLIANT
DIMENSIONS
in millimeters
PRV cermet PRV6
PARV conductive plastic PARV6
Shafts and bushings: 6 - 61 - 62
Panel cutout
Ø 6.5
(0.256")
Ø 2.5
(0.098")
5
(0.200")
Terminal options available
on all types
PCB pins
W option
0.8 x 0.3
(0.031" x 0.12)
2
(0.79")
Solder lugs
1.6 x 0.3
(0.063 x 0.012)
Ø 12.7 (1/2")
2
(0.079")
C
B
L
A
Ø 6.35 (1/4")
32 Threads/inch
Ø 3.17 (1/8")
Ø 12.7 (1/2")
0.8
(0.031")
5.08
(0.200")
5.08
(0.200")
5.08
(0.200")
0.5
(1)
b
(2)
CW
(3)
(0.020")
VARIATION LAWS
Vs %
Ve
90 %
B
F
Shaft Dia 4 mm: 6Q - 61Q - 61QH
50 %
5
Ød=4
C
B
L
Ø4
20 %
10 %
A
L
Ø 7.2
25°
50°
75°
4.3
15°
Electrical travel 270°
15°
Ø 2.6
Ø D = M7 × 0.75
0.8
Mechanical travel 300°
See ordering information for quotation
TAPERS
Tapers A - L - F - are measured between the wiper (2) and the ccw
terminal (1).
www.vishay.com
124
For technical questions, contact: sfer@vishay.com
See also: Application notes
Document Number: 51035
Revision: 29-Jun-06
(0.094")
Locking shaft H option:
61H - 62H
61LCH - 62LCH
CIRCUIT DIAGRAM
a
Conic nut
wrench 8 (3/16")
0.8 (0.031")
c
2.4
5.08
(0.200")
.4 )
12 90"
.4
(0
PRV6, PARV6
Fully Sealed Potentiometers Cermet (PRV6)
Conductive Plastic (PARV6)
ELECTRICAL SPECIFICATIONS
Resistive Element
Electrical Travel
Resistance Range
Tolerance
Power Rating at + 70 °C
PRV6
cermet
270° ±15°
20
Ω
to 10 MΩ
470
Ω
to 1 MΩ
± 20 % ± 10 %
±5%
1.5 W
0.75 W
± 100 ppm/°C
350 V
PARV6
conductive plastic
270° ± 15°
1 kΩ to 1 MΩ
470
Ω
to 500 kΩ (± 20 %)
± 20 %
± 10 % (1 kΩ to100 kΩ )
0.75 W
0.4 W
± 1000 ppm/°C
350 V
Vishay Sfernice
Linear Law (A)
Non Linear Laws (F-L)
Standard
On Request
Linear
Other Tapers
Temperature Coefficient
Limiting Element Voltage
Contact Resist. Variation CRV
End Resistance (Typical)
Dielectric Strength
Insulation Resistance (500 VDC)
2 % or 3
Ω
1
Ω
1750 VRMS (2000 VRMS on request)
10
6
MΩ
MECHANICAL SPECIFICATIONS
Mechanical Travel
Operating Torque
or
End Stop Torque max
or
Tightening Torque max
or
300° ± 5°
0.5 to 2 Ncm
0.7 to 3 oz.in.
35 Ncm
3 lb.in.
150 Ncm
13 lb.in
POWER RATING CHART
PRV6 linear law
1.50
POWER IN WATT
0.75
PARV6 linear law
PRV6 non linear law
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
Climatic Category
Sealing
PRV6
PARV6
- 55 °C to + 125 °C - 40 °C to + 125 °C
55/125/56
40/125/56
fully sealed container
IP67 and panel sealed
0.4
0
0
PARV6 non linear law
20
40
60
70
80
100
125
AMBIENT TEMPERATURE IN DEGREES CELSIUS
PERFORMANCE
CECC 41 300 and/or MIL R 94
TESTS
Load Life
CONDITIONS
1000 h at rated power
90'/30' - temperature 70 °C
Phase A dry heat 100 °C
Phase B damp heat
Phase C cold - 55 °C
Phase D damp heat 5 cycles
56 days
5 cycles - 55 °C at + 125 °C
10 g 55 to 2000 Hz
2 h each direction
100 g 6 ms 20 shocks
50 000 cycles
ΔRT
(%) REQUIREMENTS
RT
± 10 %
ΔR
1-2
(%)
R
1-2
TYPICAL VALUES AND DRIFTS
ΔRT
(%)
RT
±1%
ΔR
1-2
(%)
R
1-2
CRV < 3 % Rn
CRV < 7 % Rn
Climatic Sequence
± 10 %
± 10 %
± 0.5 %
±1%
Long Term Damp Heat
Rapid Temperature Change
Vibration
Shock
Rotational Life
± 10 %
Insulation resist. > 100 MΩ
±3%
±2%
±2%
± 10 %
± 10 %
± 0.5 %
± 0.5 %
±1%
Insulation resist. > 10
4
MΩ
± 0.2
%
± 0.2 %
CRV < 2 % Rn
no CUT > 0.1 ms ± 5 %
±5%
CRV < 7 % Rn
± 0.1 %
± 0.1 %
±3%
Document Number: 51035
Revision: 29-Jun-06
For technical questions, contact: sfer@vishay.com
See also: Application notes
www.vishay.com
125
PRV6, PARV6
Vishay Sfernice
Fully Sealed Potentiometers Cermet (PRV6)
Conductive Plastic (PARV6)
PANEL SEALING
Except for dia. 4 mm shaft, an O.ring is supplied with the
potentiometer. This O.ring should be placed into the groove
of the body and ensures the panel sealing.
For dia. 4 mm shaft please see note “P” in ordering
information.
STANDARD RESISTANCE ELEMENT DATA
PRV6 LINEAR LAW
STANDARD
RESIS-
MAX.
MAX.
MAX.
TANCE POWER WORKING WIPER
VALUES AT 70 °C VOLTAGE CUR.
Ω
20
50
100
200
500
1K
2K
5K
10K
20K
50K
100K
200K
500K
1M
2M
5M
10M
W
1.5
V
5.48
8.66
12.2
17.3
27.4
38.7
54.8
86.6
122.5
173
274
350
350
350
350
350
350
350
mA
274
173
122
87
55
38.7
27.4
17.3
12.2
8.26
5.65
3.5
1.75
0.7
0.35
0.17
0.07
0.035
PRV6 NON-LINEAR LAWS
MAX.
MAX.
MAX.
POWER WORKING WIPER
AT 70 °C VOLTAGE CUR.
W
V
mA
TCR
- 55 °C
+ 125 °C
ppm/°C
0
+ 200
SHAFTS
Shaft lengths are measured from the mounting face to the
free end of the shaft. Special shafts are available if the
customer supplies a drawing. The shaft slot is aligned to the
wiper within ± 10°.
0.75
1.5
1.22
0.61
0.25
0.12
0.06
0.025
0.012
0.75
0.61
0.25
27.3
38.2
61.2
87
122
194
273
350
350
27.4
19.3
12.2
8.7
6.1
3.9
2.74
1.75
0.7
HARDWARE
PRV6
± 100
Nuts, washer and O.ring are
separately supplied
(not
mounted on the potentiometer), in a small bag placed in the
packaging.
LOCATING PEG
Except for dia. 4 mm shaft, the potentiometers are delivered
with 2 opposite locating pegs orientated at 45°. These
2 pegs can be easily broken-off by the customer. On
request, the orientation of the pegs can be at 30° instead of
45°. Order Designation: PRV6 L (see ordering information)
PACKAGING
Carton box of 50, code: BO50
MARKING
VISHAY trademark, series, style, ohmic value (in
Ω
, kΩ
or MΩ), tolerance in %, taper code, manufacturing date
(4 digits: 2 for year, 2 for week), terminal 1.
ORDERING INFORMATION
PRV cermet
PARV conductive
plastic
SERIES
Solder Lugs
no code
PCB pins
code W
TERMINALS
Code H
not available
for 6-6Q
versions
LOCKING SHAFT
22
Ω
to 10 MΩ
linear law - cermet
470
Ω
to 1 MΩ
non-linear laws
From mounting face
cermet
DIA LENGTH
1 kΩ to 1 MΩ
CODE
d
L
linear law -
conductive
9.5
3.17
*CK
plastic
S
470
Ω
to 500 kΩ
12.5
3.17
CM
6
L
non linear laws
16
3.17
CD
61
O
conductive plastic
22
3.17
CR
62
T
470
Ω
to 100 kΩ
9.5
3
*K
61H
T
non linear laws
12.5
3
M
62H
E
conductive plastic
22
3
R
D
9.5
4
E
6Q
12.5
4
F
61Q
OHMIC VALUE
22
4
G
61QH
* not available with 62H option
STANDARD SHAFT LENGTH
20 % standard
10 % optional
5 % optional
(cermet only)
TOLERANCE
A Linear
L CW Log
VARIATION LAW
PRV
S
61
W
L
H
CM
10 k
Ω
20
%
A
PACKAGING
BO50
BUSHING
SHAFT
DIA
d
3 or 3.17
3 or 3.17
3 or 3.17
4
4
4
4
DIA LENGTH
D
B
6
61
Standard C = 9.5
no code
Option C = 12.1
code S
BODY LENGTH
62
6Q
61Q
6QP
61QP
6.35
6.35
6.35
7
7
7
7
6.35
9.5
12.5
6.5
9.5
6.5
9.5
A: standard 45°
no code
A: option 30°
code L
not available
for 6Q and 61Q
versions
See drawing
LOCATING PEGS
Shaft dia 3.17 and 3 are standard
panel sealed
Shaft dia 4: please note “P” for
panel sealed option
SHAFTS and BUSHINGS
SAP PART NUMBERING GUIDELINES
P
R
V
6
B
B
L
B
B
X
LEADS
B
2
PACKAGING
5
1
0
3
M
A
STYLE
PEG
BUSHING
See the end of this data
book
for conversion tables
MODEL
www.vishay.com
126
SHAFT
OHMIC
VALUE/TOL/LAW
OR SPECIAL
For technical questions, contact: sfer@vishay.com
See also: Application notes
Document Number: 51035
Revision: 29-Jun-06
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
京公网安备 11010802033920号
Copyright © 2005-2025 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
