Author(s)

Majid Barghian, Hadi Moghadasi Faridani

.

The hangers of suspension bridges can be placed in two forms: vertical or inclined form. Inclined hangers are more liable to fatigue. Vertical hangers are subjected to greater fluctuations of stress resulting from bridge wind loads. To improve aerodynamic stability, inclined hangers can be used instead of vertical ones. Some inclined hangers show considerable signs of distress and some of them show slackness due to their location against loads. In this paper a pedestrian suspension bridge with vertical hangers has been studied as a case study. Then, the same bridge has been studied with inclined hangers. To reduce internal forces, fatigue and slackness in hangers, horizontal cables have been added to inclined hangers. This modification is proposed by the present authors. The added horizontal cables transfer the tensile load from overstressed hangers to adjacent slacked hangers. Three different hanger patterns have been analyzed under nonlinear static analysis for symmetrical and nonsymmetrical live load plus dead load. Results showed that the modified hanger system had been improved considerably in comparison with vertical or inclined hangers and wherever that there is no improvement some solutions have been proposed.

Pedestrian Suspension Bridge, Vertical Hangers, Inclined Hangers, Modified Hangers (Suspenders), Nonlinear Static, Slackness

Barghian, M. and Faridani, H. (2011) Proposing a New Model of Hangers in Pedestrian Suspension Bridges to Solve Hangers Slackness Problem. Engineering, 3, 322-330. doi: 10.4236/eng.2011.34037.