[en] Microbial hydrogen gas production from organic matters stands out as one of the most promising alternatives for sustainable green energy production. Based on the literature review, investigation of anaerobic bio-hydrogen gas production from organic sludge waste using a mixed culture has been very limited. The objective of this study was to assess the anaerobic bio-hydrogen gas production from organic sludge waste under various conditions. (Author)

[en] A laboratory scale anaerobic membrane bioreactor (AnMBR) system for the bio-methane gas production was operated for 60 days with municipal sludge wastes as a sole carbon source. The AnMRR system utilized the external cross-flow membrane module and was equipped with on-line data acquisition which enables continuous monitoring of the performance of both bioreactor and membrane through the analyses of pH, temperature, gas production; permeate flow rate, and transmembrane pressure (TMP). Such a configuration also provides an efficient tool to study rapid variations of monitoring membrane pressure (TMP). (Author)

[en] Computerization and its vivid benefits expected in the nuclear power plant design cannot be realized without verifying the inherent safety problems. Human error aspect is also included in the verification issues. The verification spans from the perception of the changes in operation functions such as automation to the unfamiliar experience of operators due to the interface change. Therefore, a new framework for human error analysis might capture both the positive and the negative effect of the computerization. This paper suggest a basic framework for error identification through the review of the existing human error studies and the experience of computerizations in nuclear power plants

[en] In this research, a Coulomb force assisted heat pump (CF-HP) dryer was invented for the purpose of improving the drying characteristics and product quality of biomaterials. As compared to heat pump drying alone, the assistance of Coulomb force in heat pump dryer enhanced the drying rates and effective moisture diffusivity of lemon slices up to 26%, which eventually shortened the total drying time to 40%. This saved the total energy consumption of HP drying by 31.5%. High retention of vitamin C and TPC were also found in CF-HP dried slices due to mild drying temperature and fast drying rate. (Author)

[en] Tributyltin (TBT) is an organometallic compound used as anti fouling agent in marine paints. this compound is toxic not only for eukaryotes, but also for bacteria. Based on the literature review, a few researchers have reported evidence for the presence of TBT-resistant bacteria in natural seawater and marine sediment. (Author)

[en] Human factors have been well known as one of the key factors to the system effectiveness as well as the efficiency and safety of nuclear power plants(NPPs). Human factors engineering(HFE) are included in periodic safety review(PSR) on the existing NPPs and the formal safety assessment for the new ones. However, HFE for NPPs is still neither popular in practice nor concrete in methodology. Especially, the human factors guidelines, which are the most frequent form of human factors engineering in practice, reveal the limitations in their applications. We discuss the limitations and their casual factors found in human factors guidelines in order to lesson the workload of HFE practitioners and to improve the applicability of human factors guidelines. According to the purposes and the phases of HFE for NPPs, more selective items and specified criteria should be prepared carefully in the human factors guidelines for the each HFE applications in practice. These finding on the human factors guidelines can be transferred to the other HFE application field, such as military, aviation, telecommunication, HCI, and product safety

[en] In this study, human factors evaluation of BCS display design was performed. We adopted the suitability of design elements of BCS display as human factors evaluation measure. And, we also adopted guideline based evaluation, field survey and expert evaluation as evaluation method. The checklist was utilized for the evaluation, and the results of evaluation were well arranged in the evaluation format. We did not find out the HED (Human Engineering Discrepancy) impede safety of HANARO, except some necessary items to improve during short periods. We also provide some items of improvement for the enhancement of safety and operator's performance in the aspect of long periods. If the proposed improvement items were completely fulfilled, the more improved safety of HANARO will be secured

No abstract available

[en] This report provides guidance on conducting a Level I PSA for internal events in NPPs, which is based on the method and procedure that was used in the PSA for the design of Korea Standard Nuclear Plants (KSNPs). Level I PSA is to delineate the accident sequences leading to core damage and to estimate their frequencies. It has been directly used for assessing and modifying the system safety and reliability as a key and base part of PSA. Also, Level I PSA provides insights into design weakness and into ways of preventing core damage, which in most cases is the precursor to accidents leading to major accidents. So Level I PSA has been used as the essential technical bases for risk-informed application in NPPs. The report consists six major procedural steps for Level I PSA; familiarization of plant, initiating event analysis, event tree analysis, system fault tree analysis, reliability data analysis, and accident sequence quantification. The report is intended to assist technical persons performing Level I PSA for NPPs. A particular aim is to promote a standardized framework, terminology and form of documentation for PSAs. On the other hand, this report would be useful for the managers or regulatory persons related to risk-informed regulation, and also for conducting PSA for other industries

[en] This paper discusses experimental results obtained by the potentiality of cross-correlation function as a tool for analyzing propagation of wave in an aluminum and a woven glass fiber composite. Each propagated wave has its own characteristic time delay, and examination of the cross-correlation of input and output signal give the most proper wave velocity and significant path. Using the above distinctive features, we observed the propagation velocity for the aluminum alloy and a woven glass fiber composite more accurately and easily then the common methods. The fiber locations of this composite also determined by the basis of these results