[en] During recent years, radiation monitoring has become a global phenomenon due to its health effect on populations (radiation workers and general public). The annual average dose to the human received from natural background radiation is estimated to be 2.4 mSv. The radiation dose, however, is region specific and depends on the geological features of the region. The dose level further increases due to anthropogenic activities like mining and processing of different terrestrial rock/ore bodies such as uranium, granites, granulites, coal, iron, copper, phospogypsum, petroleum product etc. These materials contain noticeable amount of radio-elements such as uranium, thorium, potassium and their decay products and hence these materials are commonly termed as Natural Occurring Radioactive Materials (NORM). A survey of Gamma radiation and the data of GPS from Meja and Manda block of Allahabad District were presented along with the house statistics with soil and water sample in that area. Later on, these were analyzed in the newly establish Lab. The first phase retrieval and second phase deployment of the twin-cup pinhole dosimeter along with DTPS/DRPS, measurement of outdoor Gamma-level and alpha in all 20 BLOCKS of Allahabad district were carried. (author)

[en] The International and European standards for radiation sterilization require evidence of the effectiveness of a minimum sterilization dose of 25 kGy but do not provide detailed guidance on how this evidence can be generated. An approach, designated VD_max, has recently been described and computer evaluated to provide safe and unambiguous substantiation of a 25 kGy sterilization dose. The approach has been further developed into a practical method, which has been subjected to field evaluations at three manufacturing facilities which produce different types of medical devices. The three facilities each used a different overall evaluation strategy: Facility A used VD_max for quarterly dose audits; Facility B compared VD_max and Method 1 in side-by-side parallel experiments; and Facility C, a new facility at start-up, used VD_max for initial substantiation of 25 kGy and subsequent quarterly dose audits. A common element at all three facilities was the use of 10 product units for irradiation in the verification dose experiment. The field evaluations of the VD_max method were successful at all three facilities; they included many different types of medical devices/product families with a wide range of average bioburden and sample item portion values used in the verification dose experiments. Overall, around 500 verification dose experiments were performed and no failures were observed. In the side-by-side parallel experiments, the outcomes of the VD_max experiments were consistent with the outcomes observed with Method 1. The VD_max approach has been extended to sterilization doses >25 and <25 kGy; verification doses have been derived for sterilization doses of 15, 20, 30, and 35 kGy. Widespread application of the VD_max method for doses other than 25 kGy must await controlled field evaluations and the development of appropriate specifications/standards

[en] Due to high efficiency, cycling life, and specific energy, the Lithium-ion battery has been the best-favored selection for the Electric Vehicles (EV’s) despite high cost. The performance of the battery pack is strongly dependent on the operation condition of the EV’s and the environment. Under the extreme operation and environmental conditions of the battery, the rate of heat generation is very high which adversely affects the dissipation rate, decreases the battery life, and sometimes leads to the explosion and fire (i.e. thermal runaway). In electric vehicles, the battery thermal management technology plays a crucial role when the temperature of the cell rises exponentially during the operating environment. The temperature, therefore, between (15 to 35 °C) should be controlled. Our work presents the modeling of heat generation in the battery pack under various operation conditions. The parametric studies have been conducted to study the effect of battery operation conditions on heat generation rate and battery pack temperature. This study would be very useful in the selection of battery thermal management technology to control the battery temperature to retain the optimum condition. (paper)

[en] This paper presents a new trapped-field magnet made of second-generation high-temperature superconducting (2G HTS) rings. This so-called ring-shape 2G HTS magnet has the potential to provide much stronger magnetic fields relative to existing permanent magnets. Compared to existing 2G HTS trapped- field magnets, e.g. 2G HTS bulks and stacks, this new ring-shape 2G HTS magnet is more flexible in size and can be made into magnets with large dimensions for industrial applications. Effective magnetization is the key to being able to use trapped-field magnets. Therefore, this paper focuses on the magnetization mechanism of this new magnet using both experimental and numerical methods. Unique features have been identified and quantified for this new type of HTS magnet in the field cooling and zero field cooling process. The magnetization mechanism can be understood by the interaction between shielding currents and the penetration of external magnetic fields. An accumulation in the trapped field was observed by using multiple pulse field cooling. Three types of demagnetization were studied to measure the trapped-field decay for practical applications. Our results show that this new ring-shape HTS magnet is very promising in the trapping of a high magnetic field. As a super-permanent magnet, it will have a significant impact on large-scale industrial applications, e.g. the development of HTS machines with a very high power density and HTS magnetic resonance imaging devices. (paper)

[en] Treatment options for portomesenteric venous thrombosis range from anticoagulation to surgery, depending on chronicity, severity of symptoms, extent of thrombosis, and the availability of local expertise. For acute and subacute cases, a variety of endovascular options have been described in limited published series and case reports, including thrombolysis and mechanical thrombectomy. We report what is to our knowledge the first case in which the Trellis pharmacomechanical thrombolysis device was used successfully to treat complete acute thrombosis of the entire superior mesenteric vein and the entire portal vein with extension into all segmental intrahepatic portal branches in a young adult after liver transplantation. This device, coupled with adjunctive techniques using balloon catheters, facilitated complete restoration of flow, resulting in graft salvage and long-term patency

[en] Low-inductance solenoidal coils, which usually refer to the nonintersecting type and the braid type, have already been employed to build superconducting fault current limiters because of their fast recovery and low inductance characteristics. However, despite their usage there is still no systematical simulation work concerning the AC loss characteristics of the coils built with 2G high temperature superconducting tapes perhaps because of their complicated structure. In this paper, a new method is proposed to simulate both types of coils with 2D axisymmetric models solved by H formulation. Following the simulation work, AC losses of both types of low inductance solenoidal coils are compared numerically and experimentally, which verify that the model works well in simulating non-inductive coils. Finally, simulation works show that pitch has significant impact to AC loss of both types of coils and the inter-layer separation has different impact to the AC loss of braid type of coil in case of different applied currents. The model provides an effective tool for the design optimisation of SFCLs built with non-inductive solenoidal coils. (paper)

[en] Despite 90 % of glioblastoma (GBM) recurrences occurring in the peritumoral brain zone (PBZ), its contribution in patient survival is poorly understood. The current study leverages computerized texture (i.e. radiomic) analysis to evaluate the efficacy of PBZ features from pre-operative MRI in predicting long- (>18 months) versus short-term (<7 months) survival in GBM. Sixty-five patient examinations (29 short-term, 36 long-term) with gadolinium-contrast T_1_w, FLAIR and T_2_w sequences from the Cancer Imaging Archive were employed. An expert manually segmented each study as: enhancing lesion, PBZ and tumour necrosis. 402 radiomic features (capturing co-occurrence, grey-level dependence and directional gradients) were obtained for each region. Evaluation was performed using threefold cross-validation, such that a subset of studies was used to select the most predictive features, and the remaining subset was used to evaluate their efficacy in predicting survival. A subset of ten radiomic 'peritumoral' MRI features, suggestive of intensity heterogeneity and textural patterns, was found to be predictive of survival (p = 1.47 x 10"-"5) as compared to features from enhancing tumour, necrotic regions and known clinical factors. Our preliminary analysis suggests that radiomic features from the PBZ on routine pre-operative MRI may be predictive of long- versus short-term survival in GBM. (orig.)

[en] Collagen-based scaffolds are extensively used in biomaterials and tissue engineering applications. These scaffolds have shown great biocompatibility and versatility, but their relatively low mechanical properties may limit use in orthopaedic load-bearing applications. Moreover, terminal sterilization with gamma irradiation, as is commonly performed with commercial devices, presents concerns over structural integrity and enzymatic stability. Therefore, the goal of this study was to test the hypothesis that EDC/NHS cross-linking (10 mM/5 mM) can protect collagen-hyaluronan sponges from the damaging effects of gamma irradiation. Specifically, we evaluated compressive and tensile mechanical properties, enzymatic stability, porosity and pore size, and swelling ratio. Ultimate tensile strength and elastic modulus exhibited increases (168.5 and 245.8%, respectively) following irradiation, and exhibited over tenfold increases (1049.2 and 1270.6%, respectively) following cross-linking. Irradiation affected pore size (38.4% decrease), but cross-linking prior to irradiation resulted in only a 17.8% decrease. Cross-linking also showed an offsetting effect on the equilibrium modulus, enzymatic stability, and swelling ratio of sponges. These results suggest that carbodiimide cross-linking of collagen-hyaluronan sponges can mitigate the structural damage typically experienced during gamma irradiation, warranting their use in tissue engineering applications.

.

[en] Highlights: • In GBM, mutant ECM proteins appear largely resistant to the ST14 protease. • Patients with resistant proteins have a better survival. • The few patients with sensitive mutants have T-cell infiltrates. We previously identified a set of the most frequently mutated cytoskeleton- and extracellular matrix-related proteins (CECMPs) in numerous cancer datasets. In this report, we used a bioinformatics approach to assess the impact of amino acid (AA) substitutions on the sensitivity of CECMPs to the ST14 protease (matriptase I), a transmembrane serine protease previously implicated in cancer development. Results indicated that AA substitutions in glioblastoma multiforme (GBM) CECMPs are skewed toward increased resistance to the ST14 protease, in comparison to the wild-type peptide sequence. Furthermore, the protease resistant AA substitutions represent relatively high binding affinities to HLA class I proteins, when assessing the binding specificities using HLA class I alleles matched to the source of the mutant AA. Moreover, samples representing AA substitutions that increased protease sensitivity also represented reduced overall and disease-free survival periods for patients with glioblastoma. To assess tumor specimen immunogenicity, we identified T-cell receptor (TCR) V(D)J recombinations in GBM exome files. The overlap between ST14 protease sensitive mutant barcodes and the TCR V(D)J recombination read positive barcodes represented significantly reduced survival.