[en] We report on a new zero-field spin-echo spectrometer (ZETA), installed at the thermal three-axis spectrometer IN3 at ILL, Grenoble. In this technique the two long precession solenoids from neutron spin echo are replaced by two pairs of magnetic resonance coils in a zero-field region. This allows easy adaptation of tilted field geometries, necessary for measurements of phonon line widths with μeV energy resolution. First test measurements of the roton line width and energy shift as well as line width of the low-Q phonon and in the 'region beyond the roton' in superfluid ⁴He are described. The results are in agreement with the literature and show the good operation of ZETA. The implementation of ZETA at the high-flux three-axis spectrometer IN20, foreseen in the near future, will increase the count rate by typically one order of magnitude

[en] Today, new types of materials and procedures are sought continuously in order to achieve lower manufacturing costs, reduced energy consumption, shorter production times and other savings. In terms of the materials, TRIP steels are an attractive choice, as they provide an excellent combination of strength and ductility. They also offer good energy absorption in crash scenarios. Their main use is in the production of automotive body parts. One can expect that well-chosen processing parameters and unconventional forming routes would enable a wider range of thin-walled products to be made of these steels. Those could include thin-walled hollow products with excellent mechanical properties imparted by effective manufacturing routes at relatively low costs. If these materials are to be employed in real-world forming processes, an appropriate forming route must be chosen, integrated into an appropriate production chain and then optimized in terms of its parameters. This article describes a study of a rotary spin extrusion process. In the first stage, the impact of strain magnitude on microstructural evolution was studied in CMnSi steel using physical modelling of thermomechanical treatment. Subsequently, trials of a real-life technology chain, which efficiently combined incremental forming and heat treatment, were carried out on low-alloy CMnSi and CMnSiNb steels. The resulting products were stepped hollow parts of various diameters. Their strength was close to 1000 MPa and their elongation level exceeded 20%. (paper)

No abstract available

No abstract available