peat
- Related Topics:
- biofuel
- pyrobitumen
- sapropel
peat, spongy material formed by the partial decomposition of organic matter, primarily plant material, in wetlands such as swamps, muskegs, bogs, fens, and moors. The development of peat is favoured by warm moist climatic conditions; however, peat can develop even in cold regions such as Siberia, Canada, and Scandinavia. Beyond its considerable ecological importance, peat is economically important as a carbon sink, as a source of fuel, and as raw material in horticulture and other industries.
The wetlands in which peat forms are known as peatlands. The peat formed and housed in these special ecosystems is the largest natural terrestrial carbon store, and it sequesters more carbon than all other vegetation types in the world combined. Peat is thus critical for preventing and mitigating the effects of anthropogenic global warming. Peatlands also help minimize flood risks and filter water, both of which are invaluable ecosystem services. Peat harvesting and land-use changes that damage peatlands are a major source of greenhouse gas emissions, and in the 21st century the use of peat increasingly has been discouraged in an attempt to protect these valuable ecosystems.
Peat formation
Peat moss (Sphagnum) is one of the most common constituents of peat. Peatification is influenced by several factors, including the nature of the plant material deposited, the availability of nutrients to support bacterial life, the availability of oxygen, the acidity of the peat, and temperature. Some wetlands result from high groundwater levels, whereas some elevated bogs are the result of heavy rainfall. Although the rate of plant growth in cold regions is very slow, the rate of decomposition of organic matter is also very slow. Plant material decomposes more rapidly in groundwater rich in nutrients than in elevated bogs with heavy rainfall. The presence of oxygen (aerobic conditions) is necessary for fungal and microbial activity that promotes decomposition, but peat is formed in waterlogged soils with little or no access to oxygen (anaerobic conditions), largely preventing the complete decomposition of organic material. The formation of abundant peat was not possible before land plants spread widely during and after the Devonian Period (beginning approximately 419.2 million years ago).
The formation of peat is the first step in the formation of coal. With increasing depth of burial and increasing temperature, peat deposits are gradually changed to lignite. With increased time and higher temperatures, these low-rank coals are gradually converted to subbituminous and bituminous coal and under certain conditions to anthracite.
Types and processing
Peats may be divided into several types, including fibric, coarse hemic, hemic, fine hemic, and sapric, based on their macroscopic, microscopic, and chemical characteristics. Peat may be distinguished from lower-ranked coals on the basis of four characteristics: peats generally contain free cellulose, more than 75 percent moisture, and less than 60 percent carbon, and they can be cut with a knife. The transition to brown coal takes place slowly and is usually reached at depths ranging from 100 to 400 metres (approximately 330 to 1,300 feet).
Peat is usually hand-cut, although progress has been made in the excavation and spreading of peat by mechanical methods. Peat may be cut by spade in the form of blocks, which are spread out to dry. When dry, the blocks weigh from 0.34 to 0.91 kg (0.75 to 2 pounds). In one mechanized method, a dredger or excavator digs the peat from the drained bog and delivers it to a macerator (a device that softens and separates a material into its component parts through soaking), which extrudes the peat pulp through a rectangular opening. The pulp is cut into blocks, which are spread to dry. Maceration tends to yield more uniform shrinkage and a denser and tougher fuel. Hydraulic excavating can also be used, particularly in bogs that contain roots and tree trunks. The peat is washed down by a high-pressure water jet, and the pulp runs to a sump. There, after slight maceration, it is pumped to a draining ground in a layer, which, after partial drying, is cut up and dried further.
Uses
Dried peat can be used as a fuel and burns readily with a smoky flame and a characteristic odour. The ash is powdery and light, except for varieties that have a high content of inorganic matter. Peat is used for domestic heating purposes as an alternative to firewood and forms a fuel suitable for boiler firing in either briquetted or pulverized form. Peat is also used for household cooking in some places and has been used to produce small amounts of electricity.
Peat is only a minor contributor to the world energy supply, but large deposits occur in Canada, China, Indonesia, Russia, Scandinavia, and the United States. In the early 21st century the top four peat producers in the world were Finland, Ireland, Belarus, and Sweden, and most of the major users of peat were these and other northern European countries. Peat is sometimes considered a “slowly renewable energy” and is classified as a “solid fossil” rather than a biomass fuel by the Intergovernmental Panel on Climate Change (IPCC). Although peat is not strictly a fossil fuel, its greenhouse gas emissions are comparable to those of fossil fuels.
In horticulture, peat is used to increase the moisture-holding capacity of sandy soils and to increase the water infiltration rate of clay soils. It is also added to potting mixes to meet the acidity requirements of certain potted plants.
Peat can be used in water filtration and is sometimes utilized for the treatment of urban runoff, wastewater, and septic tank effluent. It is also used to soften aquarium water and to mimic habitats for freshwater fish.