Currency
Toggle Nav
Monthly Archives: May 2016
-
May 25, 2016
Here we collect 10 tips regarding of the most common problems while dealing with PCB Prototying orders. To make sure that you get the boards smoothly, you can have a look at the suggestions. 1.Please don't foget to generate the drill file and add it into your gerber file. 2.Please remember that the board outline must be included at least in one layer if there isn't GML/GKO/dim layer. 3.The minimum copper line width is 0.15mm for normal PCB service. 4.The minimum silkscreen width is 0.15mm and minimum height is 0.8mm. 5.The minimum panel size for V-cut is 8*8cm. 6.Please don't forget to leave a message on your order if you have some special requirements. 7.Please don't let the drill hole break the copper line. 8.Please choose
-
May 19, 2016
Until now, we have more than 10thousands creative, brilliant and well-educated pcb designers and electronic engineers as our esteemed members.
And our pcb service business is growing dramatically, there must be reasons why it happen. I'd like to explain this situation on our side.
Firstly, No MOQ Limitation.
At the very first beginning, you may feel like that.
But you don't have to be worried, you can absolutely place a trial order as low as five or ten pieces. It's available and welcomed.
-
May 11, 2016Do you know which sensor is most widely used in electronic education? Maybe you have used it, that's ultrasonic range sensor HC-SR04. Millions of HC-SR04 have been sold over the last serveral years. The HC-SR04 is so popular because it's simple, useful and very cheap. Today I will show you three projects that you can finish easily with HC-SR04.
